| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...Vea Mas Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. Vea Menos | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de ...Vea Mas DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de poliuretano. Este producto proporciona una mayor concentración de hidroxilo, mayor dureza del revestimiento y resistencia química. Presenta baja cristalinidad y permite facilidad de manejo a temperaturas inferiores. DMPA® Polyol HA-0135LV2 tiene un valor hidroxilo de 330 a 345 mg KOH/g, una densidad a 25 °C de 1170 a 1200 g/l, una viscosidad a 25 °C de 172 poise y un contenido de color (APHA) de < 250 como máx. Vea Menos | |
| Glycerine 99.7% | Acme Hardesty Co. | Glycerine 99.7% is one of the most versatile and safest chemicals available. It is used as an intermediate, softener and a plasticizer. This product can be either shipped in as small as a few drums or as large as a rail-car. | Request Sample |
| KURARAY POLYOL C-1090 | Kuraray America, Inc. | Es un grado súper hidrolizado de copolímero del etileno-vinilo de alcohol soluble en agua que logra la compatibilidad de la resistencia al agua y la estabilidad de la viscosidad. | |
| KURARAY POLYOL C-2090 | Kuraray America, Inc. | Un nuevo polímero soluble en agua que proporciona buena resistencia al agua y suficiente estabilidad de la viscosidad de su solución acuosa. | |
| KURARAY POLYOL C-3090 | Kuraray America, Inc. | Un nuevo polímero soluble en agua que proporciona una buena resistencia al agua y a suficiente estabilidad de la viscosidad de su solución acuosa. | |
| KURARAY POLYOL P-1010 | Kuraray America, Inc. | Poliol líquido de policarbonato que soporta sus nuevos proyectos de: revestimiento de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del u...Vea Mas Poliol líquido de policarbonato que soporta sus nuevos proyectos de: revestimiento de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. Vea Menos | |
| KURARAY POLYOL P-1011 | Kuraray America, Inc. | Poliol líquido del policarbonato el cual utiliza sus nuevos proyectos: capa de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano...Vea Mas Poliol líquido del policarbonato el cual utiliza sus nuevos proyectos: capa de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. Vea Menos | |
| KURARAY POLYOL P-1012 | Kuraray America, Inc. | Poliol líquido del policarbonato del cual utiliza sus nuevos proyectos: capa de cuero de gama alta, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. | |
| KURARAY POLYOL P-1020 | Kuraray America, Inc. | Poliol no cristalino de poliéster y de viscosidad baja de los cuales utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave...Vea Mas Poliol no cristalino de poliéster y de viscosidad baja de los cuales utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin el plastificante, acrilato flexible de uretano, modificación de la resina del poliéster. Vea Menos | |
| KURARAY POLYOL P-2010 | Kuraray America, Inc. | Poliol líquido del poliéster el cual utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión del uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2011 | Kuraray America, Inc. | Poliol líquido del poliéster el cual utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2012 | Kuraray America, Inc. | Poliol de poliéster de tereftalato de MPD que es adecuado para: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2020 | Kuraray America, Inc. | Poliol no cristalino del poliéster de viscosidad baja que utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin plasti...Vea Mas Poliol no cristalino del poliéster de viscosidad baja que utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin plastificante, acrilato flexible de uretano, modificación de la resina del poliéster. Vea Menos | |
| KURARAY POLYOL P-3010 | Kuraray America, Inc. | Poliol líquido de poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-4010 | Kuraray America, Inc. | Poliol líquido del poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-5010 | Kuraray America, Inc. | Poliol líquido del poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| Nippollan 1004 | Tosoh Corporation | Nippollan 1004, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 1100 | Tosoh Corporation | Nippollan 1100, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 1100, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| Nippollan 121E | Tosoh Corporation | Nippollan 121E, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 121E, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 125P | Tosoh Corporation | Nippollan 125P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 125P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 131 | Tosoh Corporation | Nippollan 131, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with...Vea Mas Nippollan 131, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| Nippollan 136 | Tosoh Corporation | Nippollan 136, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 141 | Tosoh Corporation | Nippollan 141, in the form of a yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 152 | Tosoh Corporation | Nippollan 152, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 163 | Tosoh Corporation | Nippollan 163, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 164 | Tosoh Corporation | Nippollan 164, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 179P | Tosoh Corporation | Nippollan 179P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 179P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 3027 | Tosoh Corporation | Nippollan 3027, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4002 | Tosoh Corporation | Nippollan 4002, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4009 | Tosoh Corporation | Nippollan 4009, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4010 | Tosoh Corporation | Nippollan 4010, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4040 | Tosoh Corporation | Nippollan 4040, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4042 | Tosoh Corporation | Nippollan 4042, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4073 | Tosoh Corporation | Nippollan 4073, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5018 | Tosoh Corporation | Nippollan 5018, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5035 | Tosoh Corporation | Nippollan 5035, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 800 | Tosoh Corporation | Nippollan 800, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with...Vea Mas Nippollan 800, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| PC-61 | Tosoh Corporation | PC-61, in the form of a pale yellow liquid, is a polycarbonate polyol that has applications in coatings, adhesives, elastomers, and more. | |
| PLACCEL 205UC | Daicel (U.S.A.), Inc. | PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline...Vea Mas PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline when compared to adipate polyesters. And the coat which be curing by ultraviolet(UV) or electron beam(EB) shows high flexibility, good hydrolysis resistance and weathering resistance. The recommended applications of these urethane acrylate oligomers are UV coating, UV binder, and UV adhesives, UV ink, etc. to various base materials. Vea Menos | |
| PLACCEL 208 | Daicel (U.S.A.), Inc. | PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols....Vea Mas PLACCEL 208 is general purpose type polycaplolactone diol and its molecular weight is 830. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. PLACCEL 208 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 208 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 210 | Daicel (U.S.A.), Inc. | PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is...Vea Mas PLACCEL 210 is general-purpose type polycaplolactone diol which is the molecular weight 1000. Since it is manufactured by the ring-opening-polymerization reaction of the diol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 210 can be used as modifying agents, such as polyurethane, paint resin, and epoxy resin. Especially, the polyurethane of 210 bases is excellent in durability, hydrolysis resistance, oil resistance, heat resistance and low-temperature characteristics, and it can be used for many fields, such as an elastomer, foam, spandex, adhesives, and artificial suede. Vea Menos | |
| PLACCEL 210CP | Daicel (U.S.A.), Inc. | PLACCEL 210CP is characterized for its low crystallization. In addition, it is more narrow molecular weight distribution than PLACCEL 210 which is general-purpose type. The recommended applications of these polyurethane made from PLACCEL 210CP are elastom...Vea Mas PLACCEL 210CP is characterized for its low crystallization. In addition, it is more narrow molecular weight distribution than PLACCEL 210 which is general-purpose type. The recommended applications of these polyurethane made from PLACCEL 210CP are elastomer, synthetic/artificial leather, adhesive, binder and spandex. Polyurethane elastomers made from PLACCEL 210CP show good compression set, elastic recovery and hydrolysis resistance. Vea Menos | |
| PLACCEL 210N | Daicel (U.S.A.), Inc. | PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elas...Vea Mas PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. Vea Menos | |
| PLACCEL 220N | Daicel (U.S.A.), Inc. | PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLAC...Vea Mas PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLACCEL 220N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 220N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. Vea Menos | |
| PLACCEL 305 | Daicel (U.S.A.), Inc. | PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...Vea Mas PLACCEL 305 is polycaplolactone triol and its molecular weight is 550. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 305 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 305. Vea Menos | |
| PLACCEL 309 | Daicel (U.S.A.), Inc. | PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quali...Vea Mas PLACCEL 309 is polycaplolactone triol and its molecular weight is 900. Since it is manufactured by the ring opening polymerization reaction of the triol with epsilon-caprolactone, control of hydroxyl group value is exact and there is no variation in quality. PLACCEL 309 is raw material of CASE (Coating, Adhesion, Sealant Elastomer). It can be used as modifying agents or cross linking agent such as polyurethane, paint resin, and epoxy resin. Flexibility can be given to various resins by using PLACCEL 309. Vea Menos | |
| PLACCEL 410 | Daicel (U.S.A.), Inc. | PLACCEL 410 is a polycaprolactone-tetraol which has four primary hydroxyl groups. It can be used as a urethane resin cross-linking agent and raw material for coatings. It can form advanced bridge structure, as well as maintain flexibility. | |
| PLACCEL FM2D | Daicel (U.S.A.), Inc. | PLACCEL FM2D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprola...Vea Mas PLACCEL FM2D is macro monomer with a methacrylic double bond and a primary hydroxyl group. Primary hydroxyl groups in the acrylpolyol resin are composed by a copolymerization of the PLACCEL FM series. These are located at the end of a flexible polycaprolactone chain and far from the main chain of structure. Consequently, the resins can be easily reacted with melamine or other hardening agent such as polyisocyanate to complete crosslinking. This results in elastic and strong coating films. Vea Menos | |
| PLACCEL L320AL | Daicel (U.S.A.), Inc. | PLACCEL L320AL is a liquid polycaprolactone-triol. Ordinary polycaprolactone-polyols of high molecular weight are a waxy substance with high crystalline material. PLACCEL L320AL is a part of a series that are amorphous and viscous liquid of polycaprolacto...Vea Mas PLACCEL L320AL is a liquid polycaprolactone-triol. Ordinary polycaprolactone-polyols of high molecular weight are a waxy substance with high crystalline material. PLACCEL L320AL is a part of a series that are amorphous and viscous liquid of polycaprolactone-polyols. This liquid polycaprolactone-polyols are easier to handle than the other waxy ones. Besides, we can make a polyurethane which has an excellent mechanical property such as good elastic recovery by using the liquid polycaprolactone-polyols. Consequently, PLACCEL L series have a wide range of applications which are urethane adhesive, urethane binder for graver ink, polyurethane elastomer and plasticizer for paint and epoxy-resin. Vea Menos | |
| Priplast™ 3186 Polyester Polyol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero, bloque básico de construcción para los adhesivos reticulados de PU (Poliuretano), espumas y sellantes; proporciona una excelente estabilidad hidrolítica y repelencia al agua. | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...Vea Mas Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. Vea Menos | |
| Priplast™ 3198 Polyester Polyol | Croda Coatings & Polymers | Poliol de poliéster a base de acido graso dímero de bajo MW, bloque básico de construcción para revestimientos de PU (Poliuretano), adhesivos y sellantes con buena compatibilidad con los polioles de poliéter y de poliéster, y hidrofobicidad excelente. | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and tempe...Vea Mas Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. Vea Menos | |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...Vea Mas Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. Vea Menos | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...Vea Mas Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. Vea Menos | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | La resina de poliéster TRI-REZ™ Polyol 1030-60 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 103...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1030-60 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1030-60 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto tiene una viscosidad (Brookfield a 25 °C) de 40 a 60 P, un contenido de humedad dde 0,05% máx. y un número de hidroxilo (como se suministra) de 57 a 63 mg KOH/g. Vea Menos | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | La resina de poliéster TRI-REZ™ Polyol 1030-90 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 103...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1030-90 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1030-90 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto tiene un índice de acidez (como se suministra) de 0,8 mg KOH/g como máx., una viscosidad (Brookfield a 25 °C, como se suministra) de 15 a 30 P y un color (APHA) de 250 máx. Vea Menos | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de reve...Vea Mas TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de revestimientos de poliuretano con alto contenido sólido, de dos componentes, y elastómeros que requieren excelentes propiedades de resistencia química y la luz UV. Vea Menos | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | La resina de poliéster TRI-REZ™ Polyol 1230-60 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-60 produce un polio...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1230-60 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-60 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto es un líquido claro, viscoso, con una densidad (l/g a 25 °C) de 9,3 +/- 0,3, un contenido de humedad de 0,05 máx., una viscosidad (Brookfield a 25 °C, como se suministra) de 300 a 500 P y un número hidroxil (como se suministra) de 57-63 mg KOH/g. Vea Menos | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | La resina de poliéster TRI-REZ™ Polyol 1230-90 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-90 produce un polio...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1230-90 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-90 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto es un líquido claro, viscoso, con un índice ácido (como se suministra) de 0,8 mg KOH/g máx., un contenido de hidroxil (como se suministra) de 87 - 93 mg KOH/g y una viscosidad (Brookfield a 25 °C, como se suministra) de 100 a 200 P. Vea Menos | |
| TRIMET® TME (Trimethylolethane) | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRIMET® TME (trimetiloletano) es un poliol de alto rendimiento que contiene tres grupos hidroxilo primarios. Su estructura de neopentilo compacto proporciona un alto contenido de hidroxilo y excelente resistencia a los efectos del calor, luz, hidrólisis y...Vea Mas TRIMET® TME (trimetiloletano) es un poliol de alto rendimiento que contiene tres grupos hidroxilo primarios. Su estructura de neopentilo compacto proporciona un alto contenido de hidroxilo y excelente resistencia a los efectos del calor, luz, hidrólisis y oxidación. Este producto tiene un contenido insoluble en agua máx. de 50 ppm., un color (APHA) máx. de 250 y un contenido de hidroxilo mín. de 41,0% en peso. Las aplicaciones de este producto incluyen alquídicos de primera calidad y resinas de poliéster para pinturas, resinas de revestimiento en polvo, lubricantes sintéticos de éster poliol, plastificantes, estabilizadores para plásticos y revestimientos de pigmentos de dióxido de titanio. El éster de nitrato se utiliza en explosivos y carburantes. TME también puede utilizarse como medio de almacenamiento de calor en la fase sólida. Las resinas preparadas con trimetiloletano se caracterizan por su resistencia a la intemperie y excelente resistencia al calor y a los álcalis. Vea Menos | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...Vea Mas Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. Vea Menos |
