| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...Vea Mas Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. Vea Menos | |
| ACRYSOL™ ASE-60 | Univar Solutions | ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly ...Vea Mas ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. Vea Menos | Request Sample |
| ACRYSOL™ ASE-75 | Univar Solutions | ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in imp...Vea Mas ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics. Vea Menos | Request Sample |
| ACRYSOL™ DR-1 | Univar Solutions | ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic an...Vea Mas ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic and hydrophobically modified HEC thickeners with excellent resistance to roller spattering and improved leveling in most formulations. This product is easy to handle and incorporate during the paint manufacturing process and is highly resistant to microbial attack. Vea Menos | Request Sample |
| ACRYSOL™ DR-110 | Univar Solutions | ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It i...Vea Mas ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It is effective at building viscosity in formulations from flat to semi-gloss and across all binder types, offering desirable application and feel properties, plus the cost advantage of better efficiency and the manufacturing ease of an all-liquid product. Vea Menos | Request Sample |
| ACRYSOL™ DR-2 | Univar Solutions | ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the pain...Vea Mas ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the paint and is formulated to resist microbial contamination. Vea Menos | Request Sample |
| ACRYSOL™ DR-5500 | Univar Solutions | ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in...Vea Mas ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in coatings that have high film build characteristicsfor improved hiding and appearance. It is delivered as a low viscosity liquid to allow for easy handling and easy incorporation during the manufacturing process. Vea Menos | Request Sample |
| ACRYSOL™ DR-6600 | Univar Solutions | ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high ...Vea Mas ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high film build characteristics for improved hiding and appearance. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. Vea Menos | Request Sample |
| ACRYSOL™ DR-72 | Univar Solutions | ACRYSOL™ DR-72 is a synthetic, liquid, anionic associative rheology modifier that offers a single, low cost / high performance alternative to cellulosic thickeners in interior flat, sheen, and satin latex paints. It can be used in structured paints and re...Vea Mas ACRYSOL™ DR-72 is a synthetic, liquid, anionic associative rheology modifier that offers a single, low cost / high performance alternative to cellulosic thickeners in interior flat, sheen, and satin latex paints. It can be used in structured paints and replace high molecular weight HEC in renders, plasters and trowelable products. Vea Menos | Request Sample |
| ACRYSOL™ DR-73 | Univar Solutions | ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application a...Vea Mas ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application and feel properties similar to medium grades of HEC and HMHEC cellulosic thickeners, as well as increased high shear viscosity for higher film build, brush drag and hiding. . Vea Menos | Request Sample |
| ACRYSOL™ I-62 A | Univar Solutions | ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially...Vea Mas ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties. Vea Menos | Request Sample |
| ACRYSOL™ RM-1020 | Univar Solutions | ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance com...Vea Mas ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance compared to paints using cellulosic thickeners. Vea Menos | Request Sample |
| ACRYSOL™ RM-12W | Univar Solutions | ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening ef...Vea Mas ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening efficiency. This rheology profile helps improve brush/roller loading, while offering good anti-drip properties, good in-can structure, and an excellent flow/sag balance. Vea Menos | Request Sample |
| ACRYSOL™ RM-2020 NPR | Univar Solutions | ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combi...Vea Mas ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combination with other rheology modifiers to impart excellent flow and leveling, film build, gloss development, and water resistance. Vea Menos | Request Sample |
| ACRYSOL™ RM-3000 | Univar Solutions | ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and ob...Vea Mas ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and obtaining excellent flow and leveling. It offers ICI efficiency between ACRYSOL™ RM-2020 NPR and ACRYSOL™ RM-5000. Vea Menos | Request Sample |
| ACRYSOL™ RM-3030 | Univar Solutions | ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal ...Vea Mas ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal KU response. This product has demonstrated improved flow and leveling, improved syneresis resistance, and good film build in flat to gloss formulations. Vea Menos | Request Sample |
| ACRYSOL™ RM-400 | Univar Solutions | ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow...Vea Mas ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow and leveling, and gloss development for interior and exterior paints. It also contributes significant ICI viscosity, allowing the reduction of ICI builder to approximately 25% of other starting point formulations. Vea Menos | Request Sample |
| ACRYSOL™ RM-5000 | Univar Solutions | ACRYSOL™ RM-5000 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that gives a good balance of flow and leveling as well as high film build. | Request Sample |
| ACRYSOL™ RM-6000 | Univar Solutions | ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and...Vea Mas ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. It has demonstrated utility in a broad range of emulsions, including the “newer generation,” low-VOC type resins like RHOPLEX™ SG-30 and RHOPLEX™ ML-300. Vea Menos | Request Sample |
| ACRYSOL™ RM-7 | Univar Solutions | ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower vis...Vea Mas ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower viscosity in low-shear conditions and higher viscosity in high-shear conditions. It is supplied as a high solids, low viscosity liquid for ease of use in manufacturing. Vea Menos | Request Sample |
| ACRYSOL™ RM-725 | Univar Solutions | ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contrib...Vea Mas ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. Vea Menos | Request Sample |
| ACRYSOL™ RM-8 | Univar Solutions | ACRYSOL™ RM-8 is a nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, which doesn't require pH adjustment for textile formulations. | Request Sample |
| ACRYSOL™ RM-825 | Univar Solutions | ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-...Vea Mas ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-Newtonian behavior. It is delivered at 25% solids with butyl carbitol as its cosolvent. Vea Menos | Request Sample |
| ACRYSOL™ RM-845 | Univar Solutions | ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as glo...Vea Mas ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as gloss development, for both interior and exterior paints. It imparts a rheological profile to architectural and industrial coatings very similar to that of ACRYSOL™ RM-825 Rheology Modifier, but with the benefit of no added solvent, allowing for ultra-low VOC formulations. Vea Menos | Request Sample |
| ACRYSOL™ RM-895 | Univar Solutions | ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative t...Vea Mas ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative thickener offers formulators an excellent balance of sag resistance in tinted paints, flow and leveling, and gloss development for interior and exterior paints. Vea Menos | Request Sample |
| ACRYSOL™ RM-8W | Univar Solutions | ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACR...Vea Mas ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACRYSOL™ RM-825 but is delivered free of solvents. It allows the formulation of paints with an excellent balance between flow and sag and can be used as a cothickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent compatibility at all blend ratios with the more Newtonian, solvent-free rheology modifier ACRYSOL™ RM-2020. The combination of the two, gives a wider formulation latitude to the paint formulator than previously attainable for solvent-free systems. ACRYSOL™ RM-8W is delivered as a low viscosity liquid and is therefore very easy to incorporate and should improve the paint manufacturing process. Vea Menos | Request Sample |
| ACRYSOL™ RM-995 | Univar Solutions | ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance...Vea Mas ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance in viscosity stability upon tinting and excellent sag resistance.while maintaining the properties that HEUR technology is known for, e.g. excellent flow, gloss development and applicability both interior and exterior latex coatings. It is provided as a low-viscosity material for ease of use in the manufacturing process. Vea Menos | Request Sample |
| ACRYSOL™ SCT-275 | Univar Solutions | ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener...Vea Mas ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. Vea Menos | Request Sample |
| ACRYSOL™ TT-615 | Univar Solutions | ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a high...Vea Mas ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a highly shear-thinning rheology profile that can helps build sag resistance and help reduce pigment settling in latex coatings. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. Vea Menos | Request Sample |
| ACRYSOL™ TT-935 | Univar Solutions | ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative ...Vea Mas ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative to cellulosic thickeners, offering better film build, better leveling, and easier incorporation into coatings than cellulosic thickeners. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. Vea Menos | Request Sample |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDITOL® AQ-1680 | Allnex | ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies witho...Vea Mas ADDITOL® AQ 1680 - rheology additive - is an associative acrylic thickener soluble alkali for use in aqueous type mass systems. It has high thickening power, is compatible with acrylic and cellulosic thickeners, enables the formation of thick bodies without syneresis, has great stability, and is a high-solids system. Vea Menos | Request Sample |
| ADDITOL® AQ-1681 | Allnex | ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and w...Vea Mas ADDITOL® AQ 1681 - rheology additive - is an associative acrylic thickener, alkali-soluble, with medium thickening power for use in styrenated acrylic waterborne paints. It is recommended for use in paints, sealants, background preparers, varnishes and waterproofing. Vea Menos | Request Sample |
| ADDITOL® VXW 4934 | Allnex | Aditivo para la regulación de propiedades reológicas de pinturas diluibles en agua. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | Espesante de poliuretano para sistemas de capa acuosos de secado al aire. Tiene propiedades reológicas excelentes, resultando en flujo y nivelación mejorados, espesor de película y fregado. | Request Sample |
| ADDITOL® VXW 6388 | Allnex | Espesante de poliuretano para sistemas de revestimiento acuosos de secado al aire. | Request Sample |
| ADDITOL® XL 280 | Allnex | Pasta fluida de anti-asentamiento con propiedades humectantes para pigmentos, a base de una arcilla especialmente modificada de montmorrilonite. | Request Sample |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tien...Vea Mas Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tienen una gran dureza, resistencia al amarilleo, alto brillo, buenas propiedades de secado y buena resistencia al agua y al clima. Se recomienda para aplicaciones industriales a base de solventes, como revestimientos de bobinas, pinturas anticorrosivas en aplicaciones navales y de trabajo pesado, agricultura, madera industrial y otros revestimientos metálicos. Vea Menos | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de rev...Vea Mas AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de revestimientos pigmentados a base de agua. Se recomienda para revestimientos acuosos en los que la dispersión debe agregarse al revestimiento en el momento de la mezcla mediante fuerzas de corte bajas o medias como por ejemplo, un disolvente. Vea Menos | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protecció...Vea Mas AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protección de las plantas. AEROSIL® 200 tiene control de la reología y tixotropía de los sistemas líquidos, aglutinantes y polímeros. También se utiliza para mejorar el flujo libre y anti-aglutinante característico de polvos, así como un anti-sedimentación, espesamiento, y agente anti-flacidez. Vea Menos | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona l...Vea Mas AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona líquido. AEROSIL® 300 ha demostrado una excelente transparencia en resinas de poliéster insaturado y control de la reología y tixotropía de líquidos, aglutinantes y polímeros. Vea Menos | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene u...Vea Mas AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene una excelente transparencia en resinas de poliéster insaturado y tiene control de la reología y tixotropía de líquidos, aglutinantes y polímeros. También se puede utilizar para el refuerzo de caucho de silicona y auxiliar de flujo. Vea Menos | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...Vea Mas AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. Vea Menos | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y t...Vea Mas AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y tixotropía de líquidos polares complejos basados en epoxi, poliuretano, o resinas de viniléster. También ayuda a que el engrosamiento y tixotropía de geles de cable para cables de fibra óptica. Vea Menos | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reol...Vea Mas AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reología en sistemas líquidos complejos tales como 2 recubrimientos pack- epoxi. También se puede aplicar en sistemas de recubrimiento como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos c...Vea Mas AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. También se puede incorporar fácilmente en formulaciones de caucho de silicona y mejora sus propiedades mecánicas y ópticas. Vea Menos | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, ...Vea Mas AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar el efecto de protección contra la corrosión. Además, ofrece un eficaz control reológico en sistemas líquidos complejos. Vea Menos | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y sel...Vea Mas AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y selladores de silicona, toner negativo, adhesivos y revestimientos poliméricos. AEROSIL® R 974 se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Además, mejora la hidrofobicidad y la reología de las tintas de impresión offset. Vea Menos | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...Vea Mas AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. Vea Menos | Request Sample |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 es un polvo fácilmente dispersable diseñado para pinturas de látex mate y de bajo brillo. Es especialmente útil en sistemas que se diluyen en agua antes de utilizarse. | |
| BENTONE® 1000 | Elementis | BENTONE® 1000 es un derivado orgánico de la arcilla bentonita. Este aditivo reológico altamente eficaz y rentable está diseñado para sistemas orgánicos de polaridad baja a intermedia. | |
| BENTONE® 27 | Elementis | BENTONE® 27 es un derivado orgánico de la arcilla hectorita . Está diseñado para sistemas orgánicos de polaridad moderada a alta y para fijadores sintéticos. | |
| BENTONE® 34 | Elementis | BENTONE® 34 es un derivado orgánico de una esmectita especial diseñado para sistemas orgánicos de polaridad baja a intermedia. | |
| BENTONE® 38 | Elementis | BENTONE® 38 es un derivado orgánico de la arcilla hectorita. Este aditivo reológico altamente eficaz está diseñado para sistemas orgánicos de polaridad baja a intermedia. | |
| BENTONE® 57 | Elementis | BENTONE® 57 es un derivado orgánico de la arcilla bentonita. Este aditivo reológico altamente eficaz y rentable está diseñado para sistemas orgánicos de alta polaridad. | |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...Vea Mas BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. Vea Menos | |
| BENTONE® DE | Elementis | BENTONE® DE es una arcilla hectorita en polvo hiperdispersible altamente enriquecida. | |
| BENTONE® DY CE | Elementis | BENTONE® DY CE es una arcilla orgánicamente modificada en polvo especialmente diseñada para sistemas acuosos, en especial pinturas de látex decorativas de interior. | |
| BENTONE® EW NA | Elementis | BENTONE® EW NA es una arcilla esmectita altamente enriquecida fácilmente dispersable en polvo. | |
| BENTONE® GS | Elementis | BENTONE® GS es una arcilla esmectita enriquecida en polvo específicamente desarrollada para aplicaciones en la construcción. | |
| BENTONE® HD | Elementis | BENTONE® HD es una arcilla hectorita altamente enriquecida hiperdispersable en polvo. | |
| BENTONE® LT | Elementis | BENTONE® LT es una arcilla orgánicamente modificada en polvo especialmente diseñada para sistemas acuosos, en especial pinturas de látex. | |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 es una organoarcilla altamente eficaz y fácil de utilizar. Es un aditivo reológico ideal para tintas formuladas con aceites vegetales/ de petróleo o solventes de baja polaridad. | |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 es un derivado orgánico de la arcilla bentonita. Es un aditivo que se dispersa con facilidad para sistemas de revestimiento primariamente alifáticos y otros solventes no polares o de mediana polaridad. BENTONE SD® 1 se puede agregar en cualq...Vea Mas BENTONE SD® 1 es un derivado orgánico de la arcilla bentonita. Es un aditivo que se dispersa con facilidad para sistemas de revestimiento primariamente alifáticos y otros solventes no polares o de mediana polaridad. BENTONE SD® 1 se puede agregar en cualquier momento del proceso de fabricación de la pintura o como corrección posterior. Brinda un incremento en la viscosidad, reduce el descuelgue en superficies verticales y previene la sedimentación de pigmentos y masillas. Vea Menos | |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 es un derivado orgánico de la arcilla bentonita. Está diseñado para ser utilizado en sistemas de revestimientos con polaridad de moderada a alta que contienen solventes, como por ejemplo, cetonas, ésteres, éteres de glicol y alcoholes, inclu...Vea Mas BENTONE SD® 2 es un derivado orgánico de la arcilla bentonita. Está diseñado para ser utilizado en sistemas de revestimientos con polaridad de moderada a alta que contienen solventes, como por ejemplo, cetonas, ésteres, éteres de glicol y alcoholes, incluidos los sistemas polares con algún solvente aromático. BENTONE SD® 2 es fácil de incorporar y se puede agregar seco en el proceso de molienda de los pigmentos sin necesidad de usar un activador químico o de preparar un pre-gel. Se puede utilizar como corrección posterior. Vea Menos | |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 es un derivado orgánico de la arcilla de hectorita. Es muy eficaz y está diseñado para utilizarse en sistemas de revestimiento con una amplia gama de polaridades solventes. Este producto se debe dispersar en el momento de molienda de los pig...Vea Mas BENTONE SD® 3 es un derivado orgánico de la arcilla de hectorita. Es muy eficaz y está diseñado para utilizarse en sistemas de revestimiento con una amplia gama de polaridades solventes. Este producto se debe dispersar en el momento de molienda de los pigmentos. No requiere el uso previo de gel o de activadores químicos. No se recomienda la corrección posterior con BENTONE SD® 3. Contiene también un aditivo reológico que brinda una viscosidad estable, controla el descuelgue y suspende los pigmentos. Vea Menos | |
| CAB-O-SIL® EH-5F | Univar Solutions | CAB-O-SIL® EH-5F is a high-purity material that can act as carrier, flavor masking, anti-settling, thickening, anti-caking, and fat substitution additives in food applications. | Request Sample |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| CAB-O-SIL® EH5 | Univar Solutions | CAB-O-SIL® EH5 is a very high surface fumed silica which can increase the viscosity of liquid systems and provide significant reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...Vea Mas CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. Vea Menos | Request Sample |
| CAB-O-SIL® LM150 | Univar Solutions | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...Vea Mas CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. Vea Menos | Request Sample |
| CAB-O-SIL® M-5F | Univar Solutions | CAB-O-SIL® M-5F is a high-purity material that can act as a carrier and a flavor masking, anti-settling, thickening, anti-caking, and fat substitution additive in food applications. | Request Sample |
| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...Vea Mas CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. Vea Menos | Request Sample |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...Vea Mas CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. Vea Menos | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...Vea Mas CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. Vea Menos | |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| CELLOSIZE™ QP 100MH | Univar Solutions | CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thi...Vea Mas CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thicken household cleaning products, in the fabrication of toilet tank drop-in tablets, and other applications where very high thickening efficiency is the dominant performance requirement. Vea Menos | Request Sample |
| CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...Vea Mas CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. Vea Menos | Request Sample |
| CELLOSIZE™ QP 300 | Univar Solutions | CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical us...Vea Mas CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical use level of CELLOSIZE QP 300 HEC in latex synthesis is 2% by weight (based on total monomers) in vinyl and vinyl-acrylic latex formulations (usually less in all-acrylic formulations). Vea Menos | Request Sample |
| CELLOSIZE™ QP 30000H | Univar Solutions | CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE...Vea Mas CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 30000H HEC are 4 to 6 pounds per 100 gallons, and in personal care and household cleaners, the levels of CELLOSIZE™ QP 30000H HEC are typically between 0.5% and 1%. Vea Menos | Request Sample |
| CELLOSIZE™ QP 4400H | Univar Solutions | CELLOSIZE™ QP 4400H is a medium molecular weight cellulosic polymer useful for general thickening applications, and is used primarily as a latex paint thickener. Its excellent rheological properties give paints good flow and leveling characteristics. | Request Sample |
| CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...Vea Mas CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. Vea Menos | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...Vea Mas CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. Vea Menos | |
| CLAYTONE® 40 | BYK | Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el...Vea Mas Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el agregado de un activador para lograr una eficiencia completa. Como producto de esmectita organofílica, puede aumentar en medios orgánicos y construir una estructura de gel (estructura de casa de naipes). Los enlaces débiles de hidrógeno entre las plaquetas simples de esmectita es la razón de esta estructura tixotrópica de gel. Para una eficiencia óptima, se necesita una completa separación de las plaquetas (completa dispersión de aglomerados en partículas primarias). Vea Menos | |
| CLAYTONE® AF | BYK | Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desar...Vea Mas Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos. Claytone® AF es auto-dispersante y no requiere una activador polar. Claytone® AF elimina la necesidad de alto corte o pregeles. Vea Menos | |
| CLAYTONE® APA | BYK | Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante...Vea Mas Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante, viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos y rellenos. Vea Menos | |
| CLAYTONE® HT | BYK | Claytone® HT es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y alifáticos que muestran una polaridad de baja a media. Claytone® HT demuestra alta eficiencia gelificante, viscosidad reproducible y desar...Vea Mas Claytone® HT es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y alifáticos que muestran una polaridad de baja a media. Claytone® HT demuestra alta eficiencia gelificante, viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la firme sedimentación de pigmentos y rellenos. Este producto es un aditivo reológico de alto rendimiento para uso en pinturas a base de aceite de alto rendimiento y es especialmente adecuada para revestimientos de mantenimiento, de marina e industriales. Vea Menos | |
| CLAYTONE® HY | BYK | Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y s...Vea Mas Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y sedimentación de pigmentos, reduce el vapor y le permite al fabricante de tintas controlar la viscosidad pegajosa. Vea Menos | |
| CLAYTONE-3 | BYK | CLAYTONE-3 is an cconomy rheological additive suitable for use in diesel, clean mineral oil and synthetic olefin-based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-40 | BYK | TIXOGEL® VP es un agente tixotrópico y anti-sedimentación para sistemas de baja a media polaridad. Para lograr una eficiencia óptima, TIXOGEL® VP deberia dispersarse utilizando altas fuerzas de corte. |
