| AEPD®-85 Amino Alcohol | Angus Chemical Company | AEPD®-85 Amino Alcohol is a primary neutralizing amine (2-amino-2-ethyl-1,3-propanediol), used as a replacement for diethanolamine. It is an excellent scavenger for odors related to sulfur-containing compounds and biodegradation products. This product can...Vea Mas AEPD®-85 Amino Alcohol is a primary neutralizing amine (2-amino-2-ethyl-1,3-propanediol), used as a replacement for diethanolamine. It is an excellent scavenger for odors related to sulfur-containing compounds and biodegradation products. This product can also be used as a formaldehyde scavenger. Vea Menos | |
| AKYPO® RA 50 | Kao Chemicals Europe, S.L. | AKYPO® RA 50 is an amide-based co-emulsifier with a long alkyl chain and a moderate degree of ethoxylation. It is a remarkable combination of corrosion protection and hard water stability (strong lime soap dispersion power) for long-lifetime metalworking ...Vea Mas AKYPO® RA 50 is an amide-based co-emulsifier with a long alkyl chain and a moderate degree of ethoxylation. It is a remarkable combination of corrosion protection and hard water stability (strong lime soap dispersion power) for long-lifetime metalworking fluids. It has good emulsifying properties and controls corrosion. Vea Menos | |
| AKYPO® RC 0960 | Kao Chemicals Europe, S.L. | AKYPO® RS 0906 is a co-emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a high degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is a strong co-emulsifi...Vea Mas AKYPO® RS 0906 is a co-emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a high degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is a strong co-emulsifier with foam control ability and very good improvement of hard water stability (lime soap dispersing agent) that supports corrosion prevention and improves lubricity. Vea Menos | |
| AKYPO® RLM 25 | Kao Chemicals Europe, S.L. | AKYPO® RLM 25 is an emulsifier with medium alkyl chains (C12-14) and a low degree of ethoxylation. It acts as an excellent emulsifier with strong support of anti-corrosion properties, good wetting ability, improved hard water stability, and improved lubri...Vea Mas AKYPO® RLM 25 is an emulsifier with medium alkyl chains (C12-14) and a low degree of ethoxylation. It acts as an excellent emulsifier with strong support of anti-corrosion properties, good wetting ability, improved hard water stability, and improved lubricity. Vea Menos | |
| AKYPO® RO 20 VG | Kao Chemicals Europe, S.L. | AKYPO® RO 20 VG is an excellent emulsifier with a long alkyl chain (C16-18) and a low degree of ethoxylation, especially when used in formulations with high oil content. It has a strong support of anti-corrosion properties, good wetting ability, improved ...Vea Mas AKYPO® RO 20 VG is an excellent emulsifier with a long alkyl chain (C16-18) and a low degree of ethoxylation, especially when used in formulations with high oil content. It has a strong support of anti-corrosion properties, good wetting ability, improved hard water stability, and improves lubricity. Vea Menos | |
| AKYPO® RS 0602 | Kao Chemicals Europe, S.L. | AKYPO® RS 0602 is an emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a low degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is an excellent emulsifier...Vea Mas AKYPO® RS 0602 is an emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a low degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is an excellent emulsifier with foam control ability and good improvement of hard water stability (lime soap dispersing agent) that supports corrosion prevention and improves lubricity. Vea Menos | |
| AKYPO® RSPE 66 | Kao Chemicals Europe, S.L. | AKYPO® RSPE 66 is a co-emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a moderate degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is a very strong co...Vea Mas AKYPO® RSPE 66 is a co-emulsifier with propoxylated long-saturated alkyl chains (C16-18) and a moderate degree of ethoxylation. It is essential for a long lifetime of water-miscible metalworking fluids with decreased foam stability. It is a very strong co-emulsifier with foam control ability and strong improvement of hard water stability (lime soap dispersing agent) that supports corrosion prevention and improves lubricity. Vea Menos | |
| ALKATERGE®-T | Angus Chemical Company | ALKATERGE®-T – Parte de una serie de agentes activos de superficie, no volátiles, base oxazolina, es útil como emulgente de inversión, inhibidor de corrosión de metales ferrosos y lubricante. ALKATERGE®-T es miscible en la mayoría de los líquidos orgánico...Vea Mas ALKATERGE®-T – Parte de una serie de agentes activos de superficie, no volátiles, base oxazolina, es útil como emulgente de inversión, inhibidor de corrosión de metales ferrosos y lubricante. ALKATERGE®-T es miscible en la mayoría de los líquidos orgánicos. Vea Menos | |
| AMIDET® TEC 111 | Kao Chemicals Europe, S.L. | AMIDET® TEC 111 is an ethoxylated alkyl mono ethanol amide emulsifier based on rapeseed (canola oil). It is an ideal combination of emulsifying properties and corrosion inhibition. This emulsifier blend is based on natural raw materials to simplify the fo...Vea Mas AMIDET® TEC 111 is an ethoxylated alkyl mono ethanol amide emulsifier based on rapeseed (canola oil). It is an ideal combination of emulsifying properties and corrosion inhibition. This emulsifier blend is based on natural raw materials to simplify the formulation process. It combines corrosion inhibition, good emulsifying properties, and low foaming tendency. Vea Menos | |
| AMIDET® TEC N | Kao Chemicals Europe, S.L. | AMIDET® TEC N is an ethoxylated alkyl mono ethanol amide emulsifier based on rapeseed (canola oil). It is an ideal combination of emulsifying properties and corrosion inhibition that works as an excellent emulsifier based on natural raw material. | |
| ARCOT® 4004R | Univar Solutions | ARCOT® 4004R is a calcium-based rust-preventative package. It is designed for solvent and oil-based formulations. ARCOT® 4004R features include easy to handle, free of barium and other heavy metals, and water displacing. | Request Sample |
| ARCOT® 645 F | Univar Solutions | ARCOT® 645 F is a mineral oil-based anti-corrosion additive, used in various film-forming anti-corrosion products. ARCOT® 645 F is an over-based calcium sulfonate. ARCOT® 645 features medium-term protection, optimum solvent-based formulation performances,...Vea Mas ARCOT® 645 F is a mineral oil-based anti-corrosion additive, used in various film-forming anti-corrosion products. ARCOT® 645 F is an over-based calcium sulfonate. ARCOT® 645 features medium-term protection, optimum solvent-based formulation performances, and compatibility with most solvents and oils. Vea Menos | Request Sample |
| Aristonate® C-5000 | Pilot Chemical Company | Aristonate® C-5000 is a very high molecular weight, high purity calcium oil soluble neutral alkyl aryl sulfonate. It is a viscous, dark brown petroleum sulfonate of high viscosity, which finds use in a wide variety of use in soluble oil and semi-synthetic...Vea Mas Aristonate® C-5000 is a very high molecular weight, high purity calcium oil soluble neutral alkyl aryl sulfonate. It is a viscous, dark brown petroleum sulfonate of high viscosity, which finds use in a wide variety of use in soluble oil and semi-synthetic industrial lubricant formulations. This product generates low foam levels and has excellent emulsification and corrosion protection properties. Aristonate® C-5000 imparts exceptional anti-corrosion and demulsification properties. Vea Menos | Request Sample |
| Aristonate® H | Pilot Chemical Company | Aristonate® H is a high molecular weight member of Pilot's new generation of oil soluble sodium alkyl aryl sulfonates. It is a clear dark brown, sodium petroleum sulfonate of moderate viscosity, which finds use in a wide variety of applications where exce...Vea Mas Aristonate® H is a high molecular weight member of Pilot's new generation of oil soluble sodium alkyl aryl sulfonates. It is a clear dark brown, sodium petroleum sulfonate of moderate viscosity, which finds use in a wide variety of applications where excellent corrosion protection, low foam, moderate emulsification and lubricity is required. This product provides excellent emulsification and corrosion inhibition properties in hydraulic fluids, waterproof grease, heavy-duty extreme pressure oils and water-in-oil emulsion formulation. It also imparts corrosion protection to metal parts exposed to water, such as in high water based coolants, high water based hydraulic fluids, drawing compounds, rolling oils and cutting oils. Vea Menos | Request Sample |
| Aristonate® L | Pilot Chemical Company | Aristonate® L is a low molecular weight, low foam member of Pilot's new generation of oil soluble sodium alkyl aryl sulfonates. It is a clear dark brown, sodium petroleum sulfonate of medium viscosity, which finds use in a wide variety of low foam emulsif...Vea Mas Aristonate® L is a low molecular weight, low foam member of Pilot's new generation of oil soluble sodium alkyl aryl sulfonates. It is a clear dark brown, sodium petroleum sulfonate of medium viscosity, which finds use in a wide variety of low foam emulsification, corrosion protection and lubrication formulations. This product provides excellent emulsification and dispersion properties in cutting oils, surface coating, pigment wetting and spindle oil applications. It also imparts excellent emulsification characteristics for oil in water, water-in-oil, and solids in oil formulations. Aristonate® L has the optimum balance of hydrophilic and lipophilic properties for the formulation of low oil, high water based fluids such as grinding oils or parts cleaners. Vea Menos | Request Sample |
| Aristonate® M | Pilot Chemical Company | Aristonate® M is a medium molecular weight, low foam oil soluble sodium alkyl aryl sulfonate. Aristonate® M is a clear, dark brown sodium petroleum sulfonate of medium viscosity, which finds use in a wide variety of applications where low foam emulsifica...Vea Mas Aristonate® M is a medium molecular weight, low foam oil soluble sodium alkyl aryl sulfonate. Aristonate® M is a clear, dark brown sodium petroleum sulfonate of medium viscosity, which finds use in a wide variety of applications where low foam emulsification, lubrication and maximum corrosion protection is required. Aristonate® M provides excellent emulsification, dispersion and corrosion inhibition properties in cutting oils, surface coatings, textile oils, water based lubricants and pigment wetting applications. Aristonate® M also imparts excellent emulsification characteristics for oil in water, water-in-oil, and solids in oil formulations. Vea Menos | Request Sample |
| Aristonate® MME-60 | Pilot Chemical Company | Aristonate® MME-60 is a medium molecular weight, low foam, oil soluble monoethanolamine alkyl aryl sulfonate. It is a viscous, dark brown petroleum sulfonate of moderate viscosity, which finds use in a wide variety of use in soluble oil and semi-synthetic...Vea Mas Aristonate® MME-60 is a medium molecular weight, low foam, oil soluble monoethanolamine alkyl aryl sulfonate. It is a viscous, dark brown petroleum sulfonate of moderate viscosity, which finds use in a wide variety of use in soluble oil and semi-synthetic industrial lubricant formulations. This product provides excellent emulsification, dispersion and corrosion protection properties in cutting oils, surface coatings, textile oils, water based lubricants and pigment wetting applications. Aristonate® MME-60 also imparts excellent emulsification characteristics for soluble oil and semi-synthetic industrial lubricant formulations. Vea Menos | Request Sample |
| Aristonate® S-2460 | Pilot Chemical Company | Aristonate® S-2460 is a high molecular weight, and highly branched member of Pilot’s new generation of oil soluble sodium alkyl aryl sulfonates. Aristonate® S-2460 is a clear dark brown, sodium sulfonate of relatively high viscosity, which finds use in a ...Vea Mas Aristonate® S-2460 is a high molecular weight, and highly branched member of Pilot’s new generation of oil soluble sodium alkyl aryl sulfonates. Aristonate® S-2460 is a clear dark brown, sodium sulfonate of relatively high viscosity, which finds use in a wide variety of applications where excellent corrosion protection, low foam, moderate emulsification and lubricity is required. It provides excellent emulsification and corrosion inhibition properties in hydraulic fluids, waterproof grease, heavy-duty extreme pressure oils and water-in-oil emulsion formulations. Aristonate® S-2460 also imparts corrosion protection to metal parts exposed to water, such as in high water based coolants, high water based hydraulic fluids, drawing compounds, rolling oils and cutting oils. Vea Menos | Request Sample |
| Aristonate® S-4000 | Pilot Chemical Company | Aristonate® S-4000 is a low molecular weight first-intent sodium sulfonate with excellent emulsification and lubricity characteristics. It is a clear to slightly hazy amber custom tailored sulfonate with unsurpassed handling and storage properties. This p...Vea Mas Aristonate® S-4000 is a low molecular weight first-intent sodium sulfonate with excellent emulsification and lubricity characteristics. It is a clear to slightly hazy amber custom tailored sulfonate with unsurpassed handling and storage properties. This product is a very efficient emulsifier when combined with oleic acid, which can be further formulated into low foaming soluble oils. These soluble oils can provide excellent ferrous corrosion inhibition. Vea Menos | Request Sample |
| Aristonate® S-4600 | Pilot Chemical Company | Aristonate® S-4600 is a medium to high molecular weight member of Pilot's new S-series sulfonates. It is a clear to slightly hazy amber sodium sulfonate of moderate viscosity, which finds use in a wide variety of applications where corrosion protection, l...Vea Mas Aristonate® S-4600 is a medium to high molecular weight member of Pilot's new S-series sulfonates. It is a clear to slightly hazy amber sodium sulfonate of moderate viscosity, which finds use in a wide variety of applications where corrosion protection, low foam and great emulsification is required. This product is a very efficient emulsifier when combined with oleic acid, which can be further formulated into low foaming soluble oils without the use of antifoams or defoamers. These soluble oils can provide excellent ferrous corrosion inhibition. Vea Menos | Request Sample |
| Aristonate® S-5000 | Pilot Chemical Company | Aristonate® S-5000 is a high molecular weight first intent sodium sulfonate with good emulsification properties, corrosion inhibition and a low foam profile. It is well suited for semi-synthetic metalworking and lubrication formulations incorporating para...Vea Mas Aristonate® S-5000 is a high molecular weight first intent sodium sulfonate with good emulsification properties, corrosion inhibition and a low foam profile. It is well suited for semi-synthetic metalworking and lubrication formulations incorporating paraffinic oils, especially when combined with oleic acid. They can be further formulated into low foaming soluble oils, which provide excellent corrosion inhibition. Vea Menos | Request Sample |
| Aristonate® VH-2 | Pilot Chemical Company | Aristonate® VH-2 is a high molecular weight, oil soluble, water miscible sodium alkyl aryl sulfonate. Aristonate® VH-2 is a sodium petroleum sulfonate of manageable viscosity, which finds use in a wide variety of industrial lubricant applications where ex...Vea Mas Aristonate® VH-2 is a high molecular weight, oil soluble, water miscible sodium alkyl aryl sulfonate. Aristonate® VH-2 is a sodium petroleum sulfonate of manageable viscosity, which finds use in a wide variety of industrial lubricant applications where excellent corrosion protection, dispersion, emulsification and lubricity are required. Vea Menos | Request Sample |
| ASCOTRAN® L | ASCOTEC | ASCOTRAN® L is a liquid and water soluble corrosion inhibitor for non-ferrous and ferrous metals, free from any nitrite, phosphate, borate, silicate or molybdate. it is mainly used in working fluids and water-soluble polishing fluids, as well as in cleane...Vea Mas ASCOTRAN® L is a liquid and water soluble corrosion inhibitor for non-ferrous and ferrous metals, free from any nitrite, phosphate, borate, silicate or molybdate. it is mainly used in working fluids and water-soluble polishing fluids, as well as in cleaners and neutral degreasing solutions with neutral or slightly alkaline pH. Vea Menos | |
| ASCOTRAN® R | ASCOTEC | ASCOTRAN® R is an Organic Acid Technology corrosion inhibitor for heat-transfer fluids, antifreezes and glycol or alcohol-type coolants, used in construction, industry or automotive. It is highly efficient on Copper. It is suitable for low-conductivity F...Vea Mas ASCOTRAN® R is an Organic Acid Technology corrosion inhibitor for heat-transfer fluids, antifreezes and glycol or alcohol-type coolants, used in construction, industry or automotive. It is highly efficient on Copper. It is suitable for low-conductivity Fluids. Vea Menos | |
| ASCOTRAN® RCX | ASCOTEC | ASCOTRAN® RCX is an Organic Acid Technology corrosion inhibitor for heat-transfer fluids, antifreezes and glycol or alcohol-type coolants, used in construction, industry or automotive. | |
| BD 0612 | DRD Additives | BD 0612 is an ester-based lubricity additive that gives antioxidant and corrosion protection performance. It cleans metal surfaces and can be emulsified or used in oil-based formulations. | |
| BD 0830 | DRD Additives | Everything you need in a sulfonate emulsifier base. Stability, corrosion protection, low foam, excellent solubility, all in one package. | |
| Benzotriazole | Chemceed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...Vea Mas Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. Vea Menos | |
| BENZOTRIAZOLE - GRANULAR, FLAKE, AND POWDER | NCeed Enterprises | Benzotriazole - Granular, Flake, and Powder is a white to off-white and free flowing granular, flake, or powder. It has applications as inhibitors for copper and high copper alloys. | |
| Caprylic Acid | Netchem | Caprylic Acid, also known as octanoic acid, is an eight carbon saturated fatty acid. It has a number of uses in the lubricant field. It is used to manufacture synthetic lubricants, hydraulic fluids and refrigerant lubricant. Caprylic Acid in metal working...Vea Mas Caprylic Acid, also known as octanoic acid, is an eight carbon saturated fatty acid. It has a number of uses in the lubricant field. It is used to manufacture synthetic lubricants, hydraulic fluids and refrigerant lubricant. Caprylic Acid in metal working fluids isused as solubilizer for mineral oils and acts as a corrosion and rust inhibitor in antifreeze. Vea Menos | |
| CHEMFAC NB-159 | PCC Chemax, Inc. | Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also ...Vea Mas Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also improved by the addition of this product. Vea Menos | |
| CHEMFAC PB-136 | PCC Chemax, Inc. | Chemfac PB-136 is a free acid phosphate ester which provides wetting, detergency and hydrotroping qualities to cleaning formulations. This products also exhibits mild EP properties, lubricity and emulsification attributes in metalworking formulations. | |
| CHEMFAC PB-184 | PCC Chemax, Inc. | Chemfac PB-184 is a free acid phosphate ester which provides lubricity, emulsification and EP properties to metalworking formulations. When neutralized, this material provides mild wetting and detergency properties for hard surface cleaning. | |
| CHEMFAC PF-636 | PCC Chemax, Inc. | Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and...Vea Mas Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and detergency attributes. Vea Menos | |
| Climax Molysulfide® Super Fine | Univar Solutions | Climax Molysulfide® Super Fine is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
| Climax Molysulfide® Technical | Univar Solutions | Climax Molysulfide® Technical is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
| Climax Molysulfide® Technical Fine | Univar Solutions | Climax Molysulfide® Technical Fine is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
| COLA® ZOLINE C | Colonial Chemical, Inc. | Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moistur...Vea Mas Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications. Vea Menos | Request Sample |
| COLA® ZOLINE LM | Colonial Chemical, Inc. | Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moistur...Vea Mas Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications. Vea Menos | Request Sample |
| COLA® ZOLINE O | Colonial Chemical, Inc. | Cola®Zoline imidazolines are classified as neutral agents that can easily be converted to cationic agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsification, detergency, thickening, moisture displacement,...Vea Mas Cola®Zoline imidazolines are classified as neutral agents that can easily be converted to cationic agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsification, detergency, thickening, moisture displacement, corrosion inhibition, film formation, and antistatic effects. Vea Menos | Request Sample |
| COLA® ZOLINE T | Colonial Chemical, Inc. | Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moistur...Vea Mas Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications. Vea Menos | Request Sample |
| Cola®Carb O2C | Colonial Chemical, Inc. | Cola®Carb O2C is a low-foaming ether carboxylic acid with excellent emulsification and corrosion inhibition properties and used for metalworking fluids, fire resistant hydraulic fluids and rolling emulsions. Cola®Carb O2C is extremely stable against elect...Vea Mas Cola®Carb O2C is a low-foaming ether carboxylic acid with excellent emulsification and corrosion inhibition properties and used for metalworking fluids, fire resistant hydraulic fluids and rolling emulsions. Cola®Carb O2C is extremely stable against electrolyte and hard water and shows good corrosion protection if neutralized with alkanolamines. As a multifunction lubricant, Cola®Carb O2C helps to decrease complexity of formulation and suitable for long life fluids. Vea Menos | Request Sample |
| Cola®Carb TCAM | Colonial Chemical, Inc. | Cola®Carb TCAM is an optimized blend of ether carboxylic acids designed as an emulsifier for metalworking and hydraulic fluids. It is developed to stabilize emulsions under hard water conditions and likewise to extend the use of water-miscible fluids. It ...Vea Mas Cola®Carb TCAM is an optimized blend of ether carboxylic acids designed as an emulsifier for metalworking and hydraulic fluids. It is developed to stabilize emulsions under hard water conditions and likewise to extend the use of water-miscible fluids. It is an additive that offers lubricity, corrosion inhibition, emulsification, and solubilization in aqueous formulations. Vea Menos | Request Sample |
| COLA®COR 100 | Colonial Chemical, Inc. | Cola®Cor 100 is a water-soluble amphoteric corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions provide effective corrosion protection at typical use concentrations (0.1 to 1.0%). Cola®Cor 100...Vea Mas Cola®Cor 100 is a water-soluble amphoteric corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions provide effective corrosion protection at typical use concentrations (0.1 to 1.0%). Cola®Cor 100 has been used to provide rust inhibition properties in acidic and alkaline conditions. Cola®Cor 100 exhibits excellent tolerance for water hardness and contributes detergency in aqueous systems. Vea Menos | Request Sample |
| Cola®Cor 186 | Colonial Chemical, Inc. | ola®Cor 186 is a low-foaming, excellent corrosion inhibitor useful in rolling emulsions, rolling oils, and water-based hydraulic fluids. Cola®Cor 186 comes in solid and acid forms, offering the formulator many neutralization options. Cola®Cor 186 is compa...Vea Mas ola®Cor 186 is a low-foaming, excellent corrosion inhibitor useful in rolling emulsions, rolling oils, and water-based hydraulic fluids. Cola®Cor 186 comes in solid and acid forms, offering the formulator many neutralization options. Cola®Cor 186 is compatible with phosphoric acid esters in neutralized form, and extreme-pressure properties of semi- and full synthetic formulations based on Cola®Cor 186 can be adjusted. Water-soluble salts of Cola®Cor 186 are obtained by neutralization with alkanol amines and aqueous alkali hydroxides. They may be used alone or in combination with other water-soluble corrosion inhibitors or lubricants in grinding and cutting fluids and other aqueous hydraulic systems. Vea Menos | Request Sample |
| COLA®COR 200 | Colonial Chemical, Inc. | Cola®Cor 200 is a water-soluble carboxylate that is useful in a variety of metalworking, detergent, aerosol, and water-based coating applications. Aqueous solutions are low foaming, providing effective corrosion protection and surface activity in use trea...Vea Mas Cola®Cor 200 is a water-soluble carboxylate that is useful in a variety of metalworking, detergent, aerosol, and water-based coating applications. Aqueous solutions are low foaming, providing effective corrosion protection and surface activity in use treat levels (0.5 – 1.5%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater with triethanolamine. Cola®Cor 200 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally s Vea Menos | Request Sample |
| Cola®Cor 215 | Colonial Chemical, Inc. | Cola®Cor 215 is a unique amine carboxylate blend developed for aluminum and ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, tapping, cutting, a...Vea Mas Cola®Cor 215 is a unique amine carboxylate blend developed for aluminum and ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, tapping, cutting, and grinding fluids. It may also be used as a short-term indoor corrosion inhibitor. Cola®Cor 215 leaves a thin, non-tacky film that can be easily removed with H₂O. It is effective on both steel and aluminum and is hard water stable at 300 – 400 ppm. Cola®Cor 215 contains no phosphorous or DEA. Vea Menos | Request Sample |
| Cola®Cor 298 | Colonial Chemical, Inc. | Cola®Cor 298 is a low-foaming, optimized blend of amine carboxylates primarily developed for ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, ta...Vea Mas Cola®Cor 298 is a low-foaming, optimized blend of amine carboxylates primarily developed for ferrous metals. It is water soluble and suitable for synthetic, semi-synthetic and soluble oil metalworking formulations such as machining coolants, threading, tapping, cutting, and grinding fluids. Cola®Cor 298 is primarily used for ferrous metals, but not aggressive to non-ferrous. It provides excellent protection from flash rusting and is hard water stable at over 500 ppm. Cola®Cor 298 contains no phosphorous or DEA. Vea Menos | Request Sample |
| COLA®COR 300 | Colonial Chemical, Inc. | Cola®Cor 300 is a water-soluble carboxylate corrosion inhibitor designed for metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and provide effective corrosion protection at typical in use treat levels (0.5 – 1.0%). F...Vea Mas Cola®Cor 300 is a water-soluble carboxylate corrosion inhibitor designed for metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and provide effective corrosion protection at typical in use treat levels (0.5 – 1.0%). For optimum rust protection, solution pH should be adjusted to 8.5 or greater. Cola®Cor 300 exhibits excellent tolerance to water hardness and aqueous films dry to tack free residues. Environmentally safe; does not contain boron, phosphates, chro Vea Menos | Request Sample |
| Cola®Cor 372 | Colonial Chemical, Inc. | Cola®Cor 372 is used as a low-foaming corrosion inhibitor in metalworking fluids, in rolling emulsions and water-based hydraulic fluids. Cola®Cor 372 is insoluble in water. Water soluble salts of Cola®Cor 372 are obtained by neutralization with alkanolami...Vea Mas Cola®Cor 372 is used as a low-foaming corrosion inhibitor in metalworking fluids, in rolling emulsions and water-based hydraulic fluids. Cola®Cor 372 is insoluble in water. Water soluble salts of Cola®Cor 372 are obtained by neutralization with alkanolamines and hydroxides and useful alone or combined with other water soluble corrosion inhibitors or lubricants. Alkanolamines salts derived from Cola®Cor 372 show excellent corrosion inhibition for steel and hard water stability. Vea Menos | Request Sample |
| COLA®COR 400 | Colonial Chemical, Inc. | Cola®Cor 400 is a water-soluble corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The...Vea Mas Cola®Cor 400 is a water-soluble corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The performance properties of Cola®Cor 400 are not affected by water hardness, and aqueous films dry down to non-tacky residues. Cola®Cor 400 demonstrates more potent corrosion inhibiting properties than traditionally used carboxylic types. Cola®Co Vea Menos | Request Sample |
| COLA®COR 450 | Colonial Chemical, Inc. | Cola®Cor 450 is a water-soluble corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The...Vea Mas Cola®Cor 450 is a water-soluble corrosion inhibitor designed for use in various metalworking, detergent and aerosol applications. Aqueous solutions are very low foaming and will provide effective corrosion protection at recommended use concentrations. The performance properties of Cola®Cor 450 are not affected by water hardness, and aqueous films dry down to non-tacky residues. Cola®Cor 450 demonstrates more potent corrosion inhibiting properties than traditionally used carboxylic types. Cola®Co Vea Menos | Request Sample |
| COLA®COR 500 | Colonial Chemical, Inc. | Cola®Cor 500 is a water soluble, synthetic corrosion inhibitor. Cola®Cor 500 is a highly effective, low cost preventative for cast iron, steel alloys. Cola®Cor 500 provides corrosion protection on ferrous surfaces in solution where the pH is approximately...Vea Mas Cola®Cor 500 is a water soluble, synthetic corrosion inhibitor. Cola®Cor 500 is a highly effective, low cost preventative for cast iron, steel alloys. Cola®Cor 500 provides corrosion protection on ferrous surfaces in solution where the pH is approximately 8.0 or higher. Cola®Cor 500 is non-foaming and has good stability in hard water. Vea Menos | Request Sample |
| COLA®COR 600 | Colonial Chemical, Inc. | Cola®Cor 600 is an aerosol corrosion inhibitor/emulsifier blend specifically formulated for NO VOC CONTENT products. Cola®Cor 600 is a blend of alkanolamides that is ideal for use in aerosol formulations and also makes stable, creamy liquid emulsions. | Request Sample |
| COLA®COR 700 | Colonial Chemical, Inc. | Cola®Cor 700 is a non-foaming, water-soluble corrosion inhibitor for liquid and vapor phase protecting. It will work on cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite in a variet...Vea Mas Cola®Cor 700 is a non-foaming, water-soluble corrosion inhibitor for liquid and vapor phase protecting. It will work on cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite in a variety of applications where protection of the liquid phase and vapor phase is needed. Cola®Cor 700 has proven to be an ideal and effective corrosion inhibitor for aerosol formulations containing water. Vea Menos | Request Sample |
| COLA®COR 93 | Colonial Chemical, Inc. | Cola®Cor 93 is an ashless, non-staining, oil soluble corrosion inhibitor that provides long lasting rust protection, even under severe conditions, while passing most demulsibility requirements. Cola®Cor 93 is ideal for use in rust preventatives, hydraulic...Vea Mas Cola®Cor 93 is an ashless, non-staining, oil soluble corrosion inhibitor that provides long lasting rust protection, even under severe conditions, while passing most demulsibility requirements. Cola®Cor 93 is ideal for use in rust preventatives, hydraulic oils, drawing compounds, rolling oils, and other industrial lubricants. Vea Menos | Request Sample |
| COLA®COR AER | Colonial Chemical, Inc. | Cola®Cor AER is a non-ionic blend of surfactants that has been specifically formulated for aerosol applications including insecticides, cleaners, air fresheners and other waterbased emulsion products. It features corrosion inhibiting properties that are i...Vea Mas Cola®Cor AER is a non-ionic blend of surfactants that has been specifically formulated for aerosol applications including insecticides, cleaners, air fresheners and other waterbased emulsion products. It features corrosion inhibiting properties that are important in aerosol formulation for can and valve protection. Cola®Cor AER has no components that are on the California Prop 65 list and is suited for new formulations and updating existing products. Vea Menos | Request Sample |
| Cola®Cor C-56 | Colonial Chemical, Inc. | Cola®Cor C-56 is a concentrated water-soluble cationic corrosion inhibitor for continuous treatment in oil and gas production. Cola®Cor C-56 is soluble in light brines and dispersible in very heavy brines. Cola®Cor C-56 is useful in corrosion inhibitors d...Vea Mas Cola®Cor C-56 is a concentrated water-soluble cationic corrosion inhibitor for continuous treatment in oil and gas production. Cola®Cor C-56 is soluble in light brines and dispersible in very heavy brines. Cola®Cor C-56 is useful in corrosion inhibitors designed for pumps, headers, separators, emulsion treaters, tanks, regulators, compressors, dehydrators, valves, and associated equipment. For use in the field, Cola®Cor C-56 is normally diluted to 25-35% and applied at levels of 10-50 PPM. As a clay stabilizing agent, Cola®Cor C-56 is useful during enhanced oil recovery in acidizing, fracturing, and sand control applications. Vea Menos | Request Sample |
| Cola®Cor CI-24 | Colonial Chemical, Inc. | ColaCor CI-24 is a water-soluble, highly effective corrosion compound for use as corrosion inhibitor in aqueous systems. ColaCor CI-24 is diethanolamine free, yet provides a high amount of reserve alkalinity for good corrosion protection. | Request Sample |
| COLA®COR CI-25 | Colonial Chemical, Inc. | Cola®Cor CI-25 is a water-soluble, highly effective corrosion compound for use as corrosion inhibitor in aqueous systems. Cola®Cor CI-25 is diethanolamine free, yet provides a high amount of reserve alkalinity for good corrosion protection. | Request Sample |
| COLA®COR CIC | Colonial Chemical, Inc. | Cola®Cor CIC is a unique, modified imidazoline that provides outstanding corrosion inhibition properties at low concentrations in greases and oil based lubricants. Cola®Cor CIC markedly improves the water resistance of greases while having no detrimental ...Vea Mas Cola®Cor CIC is a unique, modified imidazoline that provides outstanding corrosion inhibition properties at low concentrations in greases and oil based lubricants. Cola®Cor CIC markedly improves the water resistance of greases while having no detrimental effects on other grease properties. Vea Menos | Request Sample |
| COLA®COR CO-15 | Colonial Chemical, Inc. | Cola®Cor CO-15 is a product that is intended for use in aerosol cans. It is especially helpful in preventing corrosion in water-based aerosols that contain dimethyl ether propellant. Cola®Cor CO-15 is also useful with other propellants, compressed gases, ...Vea Mas Cola®Cor CO-15 is a product that is intended for use in aerosol cans. It is especially helpful in preventing corrosion in water-based aerosols that contain dimethyl ether propellant. Cola®Cor CO-15 is also useful with other propellants, compressed gases, hydrocarbons, or fluorocarbons. Cola®Cor CO-15 protects both the liquid phase and vapor phase inside the can. This product has been proven in field application. Vea Menos | Request Sample |
| COLA®COR CPB | Colonial Chemical, Inc. | Cola®Cor CPB is an oil soluble corrosion inhibitor based on imidazoline chemistry. Cola®Cor CPB is good corrosion inhibitor for soluble oil and semi-synthetic metalworking fluids. Cola®Cor CPB is also useful in a variety of grease formulations. | Request Sample |
| COLA®COR EDP | Colonial Chemical, Inc. | Cola®Cor EDP is a corrosion inhibitor for use in metalworking fluids. Cola®Cor EDP provides corrosion protection for ferrous and non-ferrous metals in the liquid and vapor phase. Cola®Cor EDP provides corrosion protection and phosphorous for lubrication i...Vea Mas Cola®Cor EDP is a corrosion inhibitor for use in metalworking fluids. Cola®Cor EDP provides corrosion protection for ferrous and non-ferrous metals in the liquid and vapor phase. Cola®Cor EDP provides corrosion protection and phosphorous for lubrication in metalworking fluids. Vea Menos | Request Sample |
| Cola®Cor IT | Colonial Chemical, Inc. | Cola®Cor IT is a low-foaming, excellent corrosion inhibitor useful in metalworking fluids, rolling emulsions, water-based hydraulic fluids, and metal cleaners. It is clearly soluble in glycol, water and alkanolamines, but insoluble in hydrocarbons. Cola®C...Vea Mas Cola®Cor IT is a low-foaming, excellent corrosion inhibitor useful in metalworking fluids, rolling emulsions, water-based hydraulic fluids, and metal cleaners. It is clearly soluble in glycol, water and alkanolamines, but insoluble in hydrocarbons. Cola®Cor IT demonstrates good hard water stability and normal applications do not require an additional defoamer. Cola®Cor IT may be used alone or in combination with other water soluble corrosion inhibitors or lubricants in grinding and cutting fluids and other aqueous hydraulic systems. Vea Menos | Request Sample |
| Cola®Cor KAT | Colonial Chemical, Inc. | Cola®Cor KAT is a blend of phosphate esters neutralized with alkali metal hydroxide. It is water soluble. ColaCor KAT is a corrosion inhibitor effective in alkaline environments for ferrous, non-ferrous, and yellow metals. It is compatible with all other ...Vea Mas Cola®Cor KAT is a blend of phosphate esters neutralized with alkali metal hydroxide. It is water soluble. ColaCor KAT is a corrosion inhibitor effective in alkaline environments for ferrous, non-ferrous, and yellow metals. It is compatible with all other kinds of ferrous corrosion inhibitors. Vea Menos | Request Sample |
| COLA®COR RP | Colonial Chemical, Inc. | Cola®Cor RP is a non-foaming, water-soluble corrosion inhibitor for cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite especially in cutting and grinding fluids. Cola®Cor RP has prov...Vea Mas Cola®Cor RP is a non-foaming, water-soluble corrosion inhibitor for cast iron, steel, and non-ferrous metals such as aluminum and copper. It is recommended as a replacement for sodium nitrite especially in cutting and grinding fluids. Cola®Cor RP has proven to be an extremely effective corrosion inhibitor for aerosol formulations containing water. Vea Menos | Request Sample |
| COLA®COR THE | Colonial Chemical, Inc. | Cola®Cor THE is an ashless, oil soluble corrosion inhibitor that provides long lasting rust protection as well as anti-wear properties and effective boundary lubrication. Cola®Cor THE is ideal for use in rust preventatives for industrial and steel mill ap...Vea Mas Cola®Cor THE is an ashless, oil soluble corrosion inhibitor that provides long lasting rust protection as well as anti-wear properties and effective boundary lubrication. Cola®Cor THE is ideal for use in rust preventatives for industrial and steel mill applications, hydraulic oils, drawing compounds, rolling oils, and other industrial lubricants. Vea Menos | Request Sample |
| COLA®COR V | Colonial Chemical, Inc. | Cola®Cor V is an oil soluble corrosion inhibitor and has been specifically designed to provide excellent rust inhibition for greases. Cola®Cor V is soluble in petroleum lubricant bases and is insoluble in water. | Request Sample |
| Cola®Fax 3376 | Colonial Chemical, Inc. | ColaFax 3376 is a mixture of mono and di-phosphate esters derived from an ethoxylated nonionic surfactant, which exhibits outstanding emulsifying, lubricating, antistatic, detergency and corrosion inhibiting properties. ColaFax 3376 is supplied as the fre...Vea Mas ColaFax 3376 is a mixture of mono and di-phosphate esters derived from an ethoxylated nonionic surfactant, which exhibits outstanding emulsifying, lubricating, antistatic, detergency and corrosion inhibiting properties. ColaFax 3376 is supplied as the free acid and can be easily converted to the salt of an alkali metal, amine or ammonia by a simple neutralization with the desired base. Vea Menos | Request Sample |
| Cola®Fax 3389 | Colonial Chemical, Inc. | Cola®Fax 3389 is alkoxylate phosphate esters. It is an anionic emulsifier used in the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate. Cola®Fax 3389 improves freeze-thaw resistance of paint and provides...Vea Mas Cola®Fax 3389 is alkoxylate phosphate esters. It is an anionic emulsifier used in the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate. Cola®Fax 3389 improves freeze-thaw resistance of paint and provides corrosion protection for various ferrous metals commonly used in exterior building construction. It can be used as an antiwear agent under extreme pressure conditions in metalworking fluids. Vea Menos | Request Sample |
| Cola®Fax 3390 | Colonial Chemical, Inc. | Cola®Fax 3390 is a neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to improve gloss and color pigment dispersion in latex paints. Cola®Fax 3390 also improves freeze-thaw resistance of paint and provide...Vea Mas Cola®Fax 3390 is a neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to improve gloss and color pigment dispersion in latex paints. Cola®Fax 3390 also improves freeze-thaw resistance of paint and provides corrosion protection for various ferrous metals commonly used in exterior building construction. Vea Menos | Request Sample |
| Cola®Fax 3396 | Colonial Chemical, Inc. | ColaFax 3396 is a 62% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubri...Vea Mas ColaFax 3396 is a 62% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubricating, hydrotroping, maintenance cleaning. Vea Menos | Request Sample |
| Cola®Fax 3611 | Colonial Chemical, Inc. | Cola®Fax 3611 is a low-foaming organic phosphate ester surfactant that provides effective hydrotropic properties in highly built liquid detergent formulations. Due to its compatibility and chemical stability in concentrated alkaline builder systems, it is...Vea Mas Cola®Fax 3611 is a low-foaming organic phosphate ester surfactant that provides effective hydrotropic properties in highly built liquid detergent formulations. Due to its compatibility and chemical stability in concentrated alkaline builder systems, it is particularly useful as a solubilizer for nonionics and other surfactants in high electrolyte applications. Cola®Fax 3611 is compatible for use in hypochlorite-containing formulations. Vea Menos | Request Sample |
| Cola®Liquid DCM | Colonial Chemical, Inc. | Cola®Liquid DCM is a DEA-free fatty amide blend designed for incorporation into most water-dilutable products. In addition to corrosion inhibition, Cola®Liquid DCM provides high detergency for effective cleaning and prevents soil from re-depositing after ...Vea Mas Cola®Liquid DCM is a DEA-free fatty amide blend designed for incorporation into most water-dilutable products. In addition to corrosion inhibition, Cola®Liquid DCM provides high detergency for effective cleaning and prevents soil from re-depositing after being loosened. The unique wetting properties are intended to allow dispersion over oily surfaces without creeping under and loosening flooring adhesives. The high viscosity of Cola®Liquid DCM delivers a thick, pleasing consistency for formulations, and the controlled foam provides satisfactory suds without disproportionate volume. Vea Menos | Request Sample |
| Cola®Liquid DCT | Colonial Chemical, Inc. | Cola®Liquid DCT is a Modified Cocamide DIPA and Tall Oil Soap.Cola®Liquid DCT is an excellent substitute for 2:1 DEA amides. Colonial Chemical’s ColaLiquid products consist of completely liquid, consumer-acceptable non-DEA amides that perform like traditi...Vea Mas Cola®Liquid DCT is a Modified Cocamide DIPA and Tall Oil Soap.Cola®Liquid DCT is an excellent substitute for 2:1 DEA amides. Colonial Chemical’s ColaLiquid products consist of completely liquid, consumer-acceptable non-DEA amides that perform like traditional alkanol amide surfactants. Cola®Liquid DCT can be used in any application where traditional alkanol amide surfactants have been used. Cola®Liquid DCT is effective in a wide variety of household and industrial products, including floor cleaners, corrosion inhibitors, all-purpose cleaners, and viscosity builders. Vea Menos | Request Sample |
| Cola®Lube 3403 | Colonial Chemical, Inc. | Cola®Lube 3403 is a tall oil-based alkanol amide that is dispersible in water, forming a chemical emulsion. It provides corrosion protection and antiwear properties in synthetic and semi-synthetic metalworking fluids. | Request Sample |
| Cola®Lube 3404 | Colonial Chemical, Inc. | Cola®Lube 3404 is an aliphatic phosphate ester that provides excellent corrosion inhibition, effective EP, and potent wetting/surface tension reduction properties in metalworking fluids. In its un-neutralized form, it is soluble in naphthenic and paraffin...Vea Mas Cola®Lube 3404 is an aliphatic phosphate ester that provides excellent corrosion inhibition, effective EP, and potent wetting/surface tension reduction properties in metalworking fluids. In its un-neutralized form, it is soluble in naphthenic and paraffinic oil. By neutralizing with alkanol amines, Cola®Lube 3404 is readily soluble in water. Vea Menos | Request Sample |
| Cola®Lube 3406 | Colonial Chemical, Inc. | Cola®Lube 3406 is a very low-foaming aromatic phosphate ester designed for synthetic metalworking fluids, especially grinding fluids. It provides good corrosion inhibition, lubricity, and wetting properties. Neutralization with alkanol amines is required ...Vea Mas Cola®Lube 3406 is a very low-foaming aromatic phosphate ester designed for synthetic metalworking fluids, especially grinding fluids. It provides good corrosion inhibition, lubricity, and wetting properties. Neutralization with alkanol amines is required before use. Vea Menos | Request Sample |
| Cola®Lube 3407 | Colonial Chemical, Inc. | Cola®Lube 3407 is a long-chain, aliphatic phosphate ester designed for a variety of metalworking fluid applications. It provides excellent extreme pressure and lubricity characteristics as well as emulsification and rust protection properties for both fer...Vea Mas Cola®Lube 3407 is a long-chain, aliphatic phosphate ester designed for a variety of metalworking fluid applications. It provides excellent extreme pressure and lubricity characteristics as well as emulsification and rust protection properties for both ferrous and nonferrous metallurgies. This product can be readily formulated into synthetic, semi-synthetic, and soluble oil formulations useful in cutting, grinding, rolling oils, and liquid drawing compounds. As supplied, Cola®Lube 3407 is soluble in paraffinic and naphthenic oil. It is soluble in water by pH adjustment or by the incorporation of water-soluble co-surfactants. Vea Menos | Request Sample |
| Cola®Lube 3420 | Colonial Chemical, Inc. | Cola®Lube 3420 is a unique blend of anionic and nonionic surfactants designed to produce clear microemulsions with commonly used paraffinic and naphthenic oils, lubricants, and other additives in a wide variety of metalworking fluid compositions. Cola®Lub...Vea Mas Cola®Lube 3420 is a unique blend of anionic and nonionic surfactants designed to produce clear microemulsions with commonly used paraffinic and naphthenic oils, lubricants, and other additives in a wide variety of metalworking fluid compositions. Cola®Lube 3420 contributes to corrosion protection, anti-wear, and EP properties in semi-synthetic and synthetic concentrates. Such formulations can be utilized in various cutting, drawing, tapping, and grinding operations. Vea Menos | Request Sample |
| Cola®Lube 3423 | Colonial Chemical, Inc. | Cola®Lube 3423 is a fatty acid alkanol amide that is dispersible in water and used as a corrosion inhibitor, emulsifier, and lubricity additive. It provides corrosion protection and antiwear properties in synthetic and semi-synthetic metalworking fluids, ...Vea Mas Cola®Lube 3423 is a fatty acid alkanol amide that is dispersible in water and used as a corrosion inhibitor, emulsifier, and lubricity additive. It provides corrosion protection and antiwear properties in synthetic and semi-synthetic metalworking fluids, and in cleaning fluid formulations. Vea Menos | Request Sample |
| Cola®Lube 3429 | Colonial Chemical, Inc. | Cola®Lube 3429 is a water-dispersable, specialty amine-based natural fatty acid alkanol-amide. It serves as a lubricant and emulsifier in semi-synthetic metalworking fluids. It features moderate foaming and can be easily emulsified. It increases metalwork...Vea Mas Cola®Lube 3429 is a water-dispersable, specialty amine-based natural fatty acid alkanol-amide. It serves as a lubricant and emulsifier in semi-synthetic metalworking fluids. It features moderate foaming and can be easily emulsified. It increases metalworking fluid affinity on metal surfaces. Cola®Lube 3429 is stable at high temperatures, provides wetting for metal surfaces, and is non-staining on aluminum and copper while providing good corrosion protection for ferrous metals. Cola®Lube 3429 augments formulation resistance and is easily waste-treatable. Vea Menos | Request Sample |
| Cola®Lube 3430 | Colonial Chemical, Inc. | Cola®Lube 3430 is a complex polyester based on vegetable-sourced fatty acids and polycarboxylic acids and polyhydroxy alcohols. As a polar polymer, Cola®Lube 3430 carries residual acidity which needs to be neutralized for use. Cola®Lube 3430 is hydrolytic...Vea Mas Cola®Lube 3430 is a complex polyester based on vegetable-sourced fatty acids and polycarboxylic acids and polyhydroxy alcohols. As a polar polymer, Cola®Lube 3430 carries residual acidity which needs to be neutralized for use. Cola®Lube 3430 is hydrolytically stable under alkaline conditions (up to pH 9.5) in water-miscible metalworking fluids. The multiple functional groups of the polymer enable its high affinity to multiple metal surface. Vea Menos | Request Sample |
| Cola®Lube 3440 | Colonial Chemical, Inc. | Cola®Lube 3440 is a used as lubricity booster and water-dispersable corrosion inhibitor for soluble oils, semi-synthetic and neat oil metalworking fluids. Cola®Lube 3440 may also be used as a synthetic base fluid for rolling emulsions and is suitable for ...Vea Mas Cola®Lube 3440 is a used as lubricity booster and water-dispersable corrosion inhibitor for soluble oils, semi-synthetic and neat oil metalworking fluids. Cola®Lube 3440 may also be used as a synthetic base fluid for rolling emulsions and is suitable for mineral-oil-free formulations. Vea Menos | Request Sample |
| Cola®Lube 3449 | Colonial Chemical, Inc. | Cola®Lube 3449 is a water-dispersable, specialty amine-based natural fatty acid alkanol amide. It serves as a lubricant and emulsifier in semi-synthetic metalworking fluids. It features moderate foaming and can be easily emulsified. It increases metalwork...Vea Mas Cola®Lube 3449 is a water-dispersable, specialty amine-based natural fatty acid alkanol amide. It serves as a lubricant and emulsifier in semi-synthetic metalworking fluids. It features moderate foaming and can be easily emulsified. It increases metalworking fluid affinity on metal surfaces. Cola®Lube 3449 is stable at high temperatures, provides wetting for metal surfaces, and is non-staining on aluminum and copper while providing good corrosion protection for ferrous metals Vea Menos | Request Sample |
| Cola®Lube 4715 | Colonial Chemical, Inc. | Cola®Lube 4715 is a low-foaming, long-chain alkanolamide that is dispersible in water. The product, when dispersed in the presence of water and oil, forms a chemical emulsion. Lubricants with specifically controlled viscosities can be developed due to the...Vea Mas Cola®Lube 4715 is a low-foaming, long-chain alkanolamide that is dispersible in water. The product, when dispersed in the presence of water and oil, forms a chemical emulsion. Lubricants with specifically controlled viscosities can be developed due to the unique thickening properties of Cola®Lube 4715 in water. Cola®Lube 4715 is non-staining to ferrous and non-ferrous metal while providing ferrous corrosion protection to formulations Vea Menos | Request Sample |
| Cola®Lube CD-100 | Colonial Chemical, Inc. | Cola®Lube CD-100 is an excellent lubricant and emulsifier designed for use in synthetic cutting and grinding fluids or drawing compounds. It has proved to be effective on iron, steel, stainless steel, aluminum, and other metals. Cola®Lube CD-100 has low f...Vea Mas Cola®Lube CD-100 is an excellent lubricant and emulsifier designed for use in synthetic cutting and grinding fluids or drawing compounds. It has proved to be effective on iron, steel, stainless steel, aluminum, and other metals. Cola®Lube CD-100 has low foaming properties, good corrosion inhibition, and low eye and skin irritation. It is also completely biodegradable. Cola®Lube CD-100 is water dispersible and is easily formulated into water based systems containing EP additives, other lubricants, and corrosion inhibitors. Vea Menos | Request Sample |
| Cola®Zoline TD | Colonial Chemical, Inc. | Cola®Zoline TD is 1:1 imidazoline derived from tall oil fatty acid (TOFA) and DETA. It is a fatty amine film forming agent with wide applications in oilfield and refinery to prevent corrosion of metal surfaces. | Request Sample |
| CORRGUARD® EXT | Angus Chemical Company | CORRGUARD® EXT – Neutralizante multifuncional. Prolonga la vida útil de los fluidos de metal mecanica, con mayor estabilidad de pH y compatible con múltiples metales. Producto con baja formación de espuma, ayuda a mantener el control de la corrosión de me...Vea Mas CORRGUARD® EXT – Neutralizante multifuncional. Prolonga la vida útil de los fluidos de metal mecanica, con mayor estabilidad de pH y compatible con múltiples metales. Producto con baja formación de espuma, ayuda a mantener el control de la corrosión de metales ferrosos y es biodegradable en el medio ambiente. Vea Menos | |
| CORRGUARD® LSA 6000 | Angus Chemical Company | CORRGUARD® LSA 6000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los r...Vea Mas CORRGUARD® LSA 6000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los requisitos establecidos en el reglamento TRGS611 de Alemania. Vea Menos | |
| CORRGUARD® LSA 7000 | Angus Chemical Company | CORRGUARD® LSA 7000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los r...Vea Mas CORRGUARD® LSA 7000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los requisitos establecidos en el reglamento TRGS611 de Alemania. Vea Menos | |
| CORRGUARD® LSA 8000 | Angus Chemical Company | CORRGUARD® LSA 8000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los r...Vea Mas CORRGUARD® LSA 8000 Aminoalcohol, contiene menos del 0,75% de aminas secundarias (por especificación). Para los clientes preocupados con los niveles de aminas secundarias, es una opción para la formulación de productos finales, ayudándoles a atender los requisitos establecidos en el reglamento TRGS611 de Alemania. Vea Menos | |
| CORRGUARD® SI | Angus Chemical Company | CORRGUARD® SI -Inhibidor de manchas, multifuncional y preferible del punto de vista ambiental, para aleaciones de aluminio y acero galvanizado. CORRGUARD® SI es eficaz inclusive en concentraciones tan bajas como el 0,05% (dilución de trabajo), aportando t...Vea Mas CORRGUARD® SI -Inhibidor de manchas, multifuncional y preferible del punto de vista ambiental, para aleaciones de aluminio y acero galvanizado. CORRGUARD® SI es eficaz inclusive en concentraciones tan bajas como el 0,05% (dilución de trabajo), aportando también emulsificación y lubricación. CORRGUARD® SI no contiene fosfatos ni silicatos. Vea Menos | |
| CORRGUARD®-95 | Angus Chemical Company | CORRGUARD®-95 - (2-amino-2-metil-1-propanol con el 5% de agua) es un aminoalcohol primario utilizado con éxito hace muchos años para fluidos de metal mecanica. CORRGUARD®-95, inhibidor de corrosión, es una base fuerte con bajo peso molecular y representa...Vea Mas CORRGUARD®-95 - (2-amino-2-metil-1-propanol con el 5% de agua) es un aminoalcohol primario utilizado con éxito hace muchos años para fluidos de metal mecanica. CORRGUARD®-95, inhibidor de corrosión, es una base fuerte con bajo peso molecular y representa un neutralizante eficaz de ingredientes acídicos, como los ácidos carboxílicos y ésteres de fosfato. CORRGUARD®-95 resiste la degradación microbiana y representa excelente opción para formulaciones biorresistentes de larga duración. Vea Menos | |
| DeCORE AFCI-45 | DeFOREST Enterprises, Inc. | DeCORE AFCI-45 is an amine free, low foaming, water soluble, biodegradable corrosion inhibitor. Protects a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. It is free of pho...Vea Mas DeCORE AFCI-45 is an amine free, low foaming, water soluble, biodegradable corrosion inhibitor. Protects a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. It is free of phosphorous, boron, nitrites, azoles and is non-phenolic. Suggested for use in formulations having a pH > 7 such as synthetic coolants, cleaners, and aerosol products. Prevents flash rust in mildly acidic formulations. May also be used as a hydrotrope in alkaline systems. Vea Menos | |
| DeCORE APCI-95 MOD | DeFOREST Enterprises, Inc. | DeCORE APCI-95 MOD is a water soluble corrosion inhibitor based on amine carboxylate chemistry. Effective on ferrrous and non-ferrrous metals including brass and copper. For use in aqueous systems having a pH > 7 such as coolants, metal cleaners, paints...Vea Mas DeCORE APCI-95 MOD is a water soluble corrosion inhibitor based on amine carboxylate chemistry. Effective on ferrrous and non-ferrrous metals including brass and copper. For use in aqueous systems having a pH > 7 such as coolants, metal cleaners, paints & coatings and water based lubricants. Vea Menos | |
| DeCORE IDMT-100 | DeFOREST Enterprises, Inc. | DeCORE IDMT-100 is a 100% active, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25-0.5%) on a variety of metals including steel, aluminum, copper, brass, and galvanized. Suggested for use in metal cleaners, metalworking fluids, ...Vea Mas DeCORE IDMT-100 is a 100% active, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25-0.5%) on a variety of metals including steel, aluminum, copper, brass, and galvanized. Suggested for use in metal cleaners, metalworking fluids, and other applications where corrosion inbibition is desired. Vea Menos | |
| DePHOS 8028 | DeFOREST Enterprises, Inc. | DePHOS 8028 is a low-to-moderate foaming, multifunctional, 80% active, phosphate ester-potassium salt. Exhibits multi-metal corrosion inhibition, lubricity, detergency, wetting, hydrotroping, and scale inhibition. Stable in mild acid and alkaline systems....Vea Mas DePHOS 8028 is a low-to-moderate foaming, multifunctional, 80% active, phosphate ester-potassium salt. Exhibits multi-metal corrosion inhibition, lubricity, detergency, wetting, hydrotroping, and scale inhibition. Stable in mild acid and alkaline systems. Suggested for use in industrial applications including cleaners, metalworking formulations, and for oilfield applications. Vea Menos | |
| DeTERIC ODP-LF | DeFOREST Enterprises, Inc. | DeTERIC ODP-LF, CAS #94441-92-6, sodium octyliminodipropionate is a very low foaming amphoteric with excellent alkaline & acid stability. Suggested for use as a highly effective hydrotrope in low foaming alkaline or acid cleaners. Exhibits corrosion inhib...Vea Mas DeTERIC ODP-LF, CAS #94441-92-6, sodium octyliminodipropionate is a very low foaming amphoteric with excellent alkaline & acid stability. Suggested for use as a highly effective hydrotrope in low foaming alkaline or acid cleaners. Exhibits corrosion inhibition properties. Approved for use as inert in non-food pesticide formulations. Zero VOCs (ASTM E-1868-10/SCAQMD Rule 1144). Vea Menos |
