| Desmophen® 1400 PR 75% MIBK | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding seal...voir plus Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding sealers and two-component clear and pigmented top coats for wood. It can be also used in coating systems for metal and plastics. This product has an iodine color value (50% solution) of < 5, a flash point of < 3°C, and a viscosity at 23°C of 13.000 ± 2.000 mPa·s. voir moins | |
| Desmophen® 1652 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C...voir plus Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C of 11,000 ± 2,000 mPa·s. Desmophen® 1652 is used in combination with Desmodur® VL to formulate flexible solvent-free coatings and sealers. If Desmodur® L or HL are used, the formulations will only yield a drying film if they are greatly overcrosslinked. voir moins | |
| Desmophen® 1700 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent ...voir plus Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent weight of approx. 1310, a viscosity at 23°C of 17,500 ± 2,500 mPa·s, and a pour point of approx. -5°C. Combinations of Desmophen® 1700 with various polyisocyanates yield highly flexible coatings. For this reason, the product is normally used as the flexibilizing component in combination with other Desmophen® grades. In certain combinations, e.g. with Desmophen® 800, the addition of Desmophen® 1700 increases the toughness and resistance to wear and abrasion of the paint films. Such combinations can be used to coat furniture, floors and parquet. voir moins | |
| Desmophen® 1800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C,...voir plus Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C, and a density at 20°C of approx. 1.19g/ml. In combination with Desmodur® L, Desmophen® 1800 yields highly flexible coatings for rubber and plastics and high-build flexible finishes. If necessary, it can be combined with other Desmophen® grades. voir moins | |
| Desmophen® 2060 BD | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1...voir plus Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1.7 ± 0.05 % by wt., and a viscosity at 25°C of 310 ± 25 mPa·s. Desmophen® 2060 BD is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Desmophen® 5035 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free...voir plus Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,600g, a hydroxyl number of 35.0 ± 2.0mg KOH/g, and a viscosity at 25°C of 860 ± 70 mPa·s. Desmophen® 5035 BT is suitable for combination with many Desmodur® products in the formulation of elastic coatings and adhesives. It is suitable as a raw material in the formulation of low-solvent reactive adhesives and coatings. Desmophen® 5035 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Desmophen® 5168 T | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5168 T is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. This product is a solvent-free, ...voir plus Desmophen® 5168 T is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. This product is a solvent-free, pale-coored, low-viscosity linear polypropylene ether polyol liquid. Desmophen® 5168 T has a hydroxyl number of 28.0 ± 2.0mg KOH/g, a viscosity at 25°C of 870 ± 70 mPa·s, and an OH equivalent weight of approx. 2,000g. voir moins | |
| Desmophen® 631 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 631 MPA is a saturated polyester resin. | |
| Desmophen® 650 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. Th...voir plus Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. They also have very good resistance to chemicals and high abrasion resistance. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 64±2%, a flash point of approx. 46°C, and a hazen color value of ≤ 100. voir moins | |
| Desmophen® 650A 65 PMA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings. | |
| Desmophen® 651 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very g...voir plus Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 65±1%, a flash point of approx. 40°C, and a hazen color value of ≤ 100. voir moins | |
| Desmophen® 651 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemical...voir plus Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 67±1%, a flash point of approx. 32°C, and an acid value of ≤ 3mg KOH/g. voir moins | |
| Desmophen® 670 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics an...voir plus Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 can be used as a flexibilizer in other DD coating systems. This product has a viscosity at 23°C (80% in butyl acetate) of 2,200 ± 400 mPa·s, a pour point of approx. + 8°C, and an acid value of 2 ± 1mg KOH/g. voir moins | |
| Desmophen® 670 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are ma...voir plus Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 BA can also be added to other two-component polyurethane systems to improve their flexibility. This product has a flash point of approx. 32°C, an acid value of 1.8±1mg KOH/g, and a non-volatile content (1g resin/1h 125°C, convection oven) of 80±1%. voir moins | |
| Desmophen® 680 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be use...voir plus Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying two-component coatings. This product as a viscosity at 23°C of 3,000 ± 500 mPa·s, a non-volatile content (2g resin/2ml toluene/1h 125°C, convection oven) of 70±1%, and a flash point of approx. 32°C. Desmophen® 680 BA is a hard co-reactant for use with Desmodur® N. The drying properties of this combination are comparable with those of the acrylic Desmophen® resin/Desmodur® N systems developed specially for automotive repair paints. It is therefore particularly suitable for the formulation of air-drying automotive and industrial coatings. Coatings crosslinked with Desmodur® L and HL are particularly fast-drying, making them suitable for applications such as paper finishing. voir moins | |
| Desmophen® 680 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in comb...voir plus Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying, two-component coatings. Desmophen® 680 X is a hard co-reactant for Desmodur® N grades. The drying of such combinations is comparable with that of the acrylic resin/Desmodur® N systems developed specially for vehicle repair. They are therefore particularly suitable for use in the formulation of air-drying automotive and industrial coatings. Crosslinking with Desmodur® L and HL results in very fast-drying coatings which can be used in, for example, paper finishing. voir moins | |
| Desmophen® 690 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value o...voir plus Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value of ≤ 6%, a hydroxyl content of 1.4 ± 0.2%, and a non-volatile content (1g resin/1h 125°C, convection oven) 70 ± 2%. voir moins | |
| Desmophen® 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropyla...voir plus Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropylacetate-2) of 850 ± 150 mPa·s, and an equivalent weight of approx. 200. With Desmodur® L as the reaction partner, Desmophen® 800 yields hard films with good chemical resistance. These coatings are also characterized by high impact resistance, toughness and abrasion resistance. As a combination polyol with Desmophen® 1100, Desmophen® 800 can be used to formulate floor coatings with high abrasion resistance. voir moins | |
| Desmophen® 800 80% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatil...voir plus Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 80 ± 1%. When combined with Desmodur® L, Desmophen® 800 80 % BA yields hard and chemically resistant films. The coatings are also caracterised by their high impact strength, toughness and resistance to abrasion. When combined with Desmophen® 1100, it yields floor coatings with high resistance to abrasion. voir moins | |
| Desmophen® 800 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60...voir plus Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60°C, a flash point of approx. -4°C, an equivalent weight of approx. 320, and hazen color value of ≤ 250. voir moins | |
| Desmophen® 800 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When c...voir plus Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When combined with Desmodur® L, Desmophen® 800 MPA yields hard and chemically resistant films. The coatings are also characterised by their high impact strength, toughness and resistance to abrasion. A combination with Desmophen® 1100 yields floor coatings with high resistance to abrasion. voir moins | |
| Desmophen® 850 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coat...voir plus Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coatings. This product has a pour point of approx. +10°C, a hazen color value (70% in 1-methoxypropylacetate-2) of ≤ 200, and a viscosity at 75°C of 410 ± 50 mPa·s. voir moins | |
| Desmophen® C 1100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of...voir plus Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of approx. 0.1mg KOH/g, and a viscosity at 23°C of 3,200 ± 1,300 mPa·s. In combination with polyisocyanates as a high-grade building block for the formulation of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. voir moins | |
| Desmophen® C 1200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability,...voir plus Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. This product has a viscosity at 23°C of 16,500 ± 2,500 mPa·s, a hazen color value of < 150, and a hydroxyl content of 1.7 ± 0.2%. voir moins | |
| Desmophen® C 2100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good...voir plus Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. It has a hydroxyl content of 3.3 ± 0.3%, viscosity at 75°C of 410 ± 110 mPa·s, and an equivalent weight of approx. 500. voir moins | |
| Desmophen® C 2200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very...voir plus Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a viscosity at 75°C 2,300 ± 750 mPa·s, a density at 20°C of approx. 1.14g/cm^3. voir moins | |
| Desmophen® C XP 2716 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very goo...voir plus Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a hydroxyl content of approx. 5.2%, an acid number of approx. 0.1mg KOH/g, and a water content of approx. 0.05%. voir moins | |
| Desmophen® NH 1220 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1220 is a solvent-free, low-viscosity, aminofunctional co-reactant resin for polyisocyanate developed for use in the formulation of tough but flexible, lightfast and highly reactive two-component polyurethane/polyurea spray coatings. This pr...voir plus Desmophen® NH 1220 is a solvent-free, low-viscosity, aminofunctional co-reactant resin for polyisocyanate developed for use in the formulation of tough but flexible, lightfast and highly reactive two-component polyurethane/polyurea spray coatings. This product has an amine value of 240-248mg KOH/g, a flash point of > 97°C, and a density at 20°C of approx. 1.066g/ml. voir moins | |
| Desmophen® NH 1420 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1420 is a solvent-free, low-viscosity, amine-functional co-reactant resin developed for use in the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has an amine value of 199-203...voir plus Desmophen® NH 1420 is a solvent-free, low-viscosity, amine-functional co-reactant resin developed for use in the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has an amine value of 199-203mg KOH/g, a viscosity at 25°C of 900-2,000 mPa·s, and an equivalent weight of approx. 276. voir moins | |
| Desmophen® NH 1520 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a ...voir plus Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a flash point of approx. 74°C, and an amine value of 189-193mg KOH/g. voir moins | |
| Desmophen® NH 1521 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1521 is an amino-functional co-reactant for polyisocyanates, and is used for the manufacture of high-solids, two-component polyurethane coating formulations. This product has an amine number of 168-176mg KOH/g, a solvent content (GC method) ...voir plus Desmophen® NH 1521 is an amino-functional co-reactant for polyisocyanates, and is used for the manufacture of high-solids, two-component polyurethane coating formulations. This product has an amine number of 168-176mg KOH/g, a solvent content (GC method) of 9-11%, and an equivalent weight of approx. 326. Desmophen® NH 1521 is a reactive thinner which is suitable, either alone or in combination with suitable OH-functional polyacrylates and cured with e. g. Desmodur® N 3600 or N 3390, for the formulation of high-solids primer fillers and topcoats for automotive refinishing applications. voir moins | |
| Desmophen® PL 300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ c...voir plus Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ convection oven) of 60 ± 1, an iodine color value, 50 % resin of max. 5, and a viscosity at 23°C of 5,350 ± 150 mPa·s. Desmophen® PL 300 is highly reactive and yields good transparency, level-ling and gloss. It can also be used to formulate primers with a higher solids content than those based on highly condensed resins. In such coatings, the product yields good overcoatability and early sand-ability. voir moins | |
| Desmophen® PL 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This prod...voir plus Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of approx. 70%, a hydroxyl content (supply form) of approx. 2.5%, and an iodine color value (50% resin) of max. 2. Desmophen® PL 800 is characterised by excellent pigment wetting and gloss. It is therefore especially suitable for the formulation of high-gloss pigmented polyurethane finishes. Coatings formulated with Desmophen® PL 800 have low application viscosity and a long pot life, good yellowing resistance, excellent elasticity and high body. Generally speaking, the product has good compatibility. However, this should be tested in each individual case. voir moins | |
| Desmophen® PL 817 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of...voir plus Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of 10,000 ± 2,000 mPa·s, a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 75 ± 1, and an acid value (supply form) of 3.3 ± 0.2%. Desmophen® PL 817 is suitable for combination with highly condensed resins in the formulation of primers with a high solids content. No significant deterioration in reactivity, sandability or chemical resistance is observed compared with formulations based solely on this type of binder. In top coat formulations, Desmophen® PL 817 yields films with good surface hardness and matting. Generally speaking, Desmophen® PL 817 has good compatibility with a large number of physically drying binders (e.g. nitrocellulose). However, compatibility tests should be carried out in each individual case. voir moins | |
| Desmophen® T 1665 SN/IB | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings a...voir plus Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings and general industrial coatings with very good weather stability. This product has a density at 20°C (solvent-free) of approx. 1.17g/ml, a hydroxyl content (theoretical) of approx. 1.17%, and an OH equivalent weight (supply form) of approx. 1,000. voir moins | |
| Desmophen® T 1775 SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for...voir plus Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for the formulation of can coatings for food packaging. This product has a non-volatile content (2g resin/2ml toluene/1h 125°C/convection oven) of 75 ± 2%, a density at 20°C of approx. 1.08g/ml, and a viscosity at 23°C of 3,700 ± 600 mPa·s. Desmophen T 1775 SN was developed specially as a co-reactant for blocked polyisocyanates in coil coating applications. When combined with preferably Desmodur BL 4265, it yields one-component polyurethane coil coatings with a balanced hardness/flexibility ratio, good resistance to scratching and abrasion as well as excellent QUV/B stability. Dibutyltin dilaurate has proved suitable as the catalyst. The addition should be 0.1–1 %, calculated on the solid binder. The product can be combined with other blocked isocyanates and HMMM-type amino resins. However, such formulations do not generally achieve the same high surface hardness as is achieved with Desmodur BL 4265. voir moins | |
| Desmophen® VP LS 2249/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an...voir plus Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an acid value of approx. 2mg KOH/g, a flash point of approx. 130°C, a hydroxyl content of 15.5 ± 1%, and a viscosity at 23°C of 1,900 ± 200 mPa·s. Desmophen® VP LS 2249/1 is used as the hardener component in weather-stable polyurethane systems. The preferred polyol combinations are mixtures with, for example, Desmophen® 1150 or Desmophen® C 1100. Desmophen® VP LS 2249/1 is used in the formulation of hard coatings, sealing compounds and mortars for decorative gravel. The aforementioned Desmodur® grades are among the suitable co-reactants. voir moins | |
| Desmophen® VP LS 2328 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ±...voir plus Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ± 0.35%, an acid value of < 0.5mg KOH/g, and a vscosity at 23°C of 800 ± 50 mPa·s. Desmophen® VP LS 2328 is used as the flexibilising component in two-component polyurethane coatings. Preferred polyol combinations are mixtures with e.g. Desmophen® VP LS 2249/1 as the hard component to achieve the desired flexibility. Desmophen® VP LS 2328 is suitable for the formulation of highly flexible polyurethane coatings. Combination with Desmophen® VP LS 2249/1 yields systems of medium flexibility. voir moins | |
| Desmophen® VP LS 2388 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor wea...voir plus Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications. This product has a non-volatile content (1g,1h,125°C) of 80 ± 2%, a viscosity at 23°C of 3,000 ± 500 mPa·s, an equivalent weight of approx. 450. Desmophen® VP LS 2388 is used primarily in combination with Desmodur® N 75 and Desmodur® N 3390 in the formulation of fast-drying, high-solids, two-component polyurethane coatings characterised by good lightfastness and weather stability, high film elasticity and good tar resistance. Of particular note is the better QUV performance and tar resistance compared with a Desmodur® N / Desmophen® 670 combination. The film elasticity values are comparable with those yielded by Desmophen® 670. voir moins | |
| DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 is a multifunctional aqueous amine low odor neutralizer, with pH adjustment and stability, to promote the show of film gloss and to improve anti-corrosion in tanks. It has low odor, low volatility and effectively improves the freeze-thaw stab...voir plus DeuAdd MA-95 is a multifunctional aqueous amine low odor neutralizer, with pH adjustment and stability, to promote the show of film gloss and to improve anti-corrosion in tanks. It has low odor, low volatility and effectively improves the freeze-thaw stability of liquid paint and tank corrosion resistance. voir moins | |
| DeuAdd MB-11 | Elementis 海名斯特殊化学 | DeuAdd MB-11 is used for a broad spectrum of bactericidal preservatives in product production. It provides excellent bacteriostatic, and a bactericidal effect. It can be widely used as an aqueous emulsion in milk and most of the plastic paint, water-based...voir plus DeuAdd MB-11 is used for a broad spectrum of bactericidal preservatives in product production. It provides excellent bacteriostatic, and a bactericidal effect. It can be widely used as an aqueous emulsion in milk and most of the plastic paint, water-based paint and other water-based systems. voir moins | |
| DeuAdd MB-16 | Elementis 海名斯特殊化学 | DeuAdd MB-16 is for a broad spectrum of preservative products. It can provide excellent bactericidal in products and has an antifungal effect. It can be widely used in aqueous systems. It can effectively inhibit the breeding of mold, bacteria, prevent the...voir plus DeuAdd MB-16 is for a broad spectrum of preservative products. It can provide excellent bactericidal in products and has an antifungal effect. It can be widely used in aqueous systems. It can effectively inhibit the breeding of mold, bacteria, prevent the coating becoming faded in color or coating deterioration, particularly under the effect of high humidity environment. voir moins | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks...voir plus DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks and aluminum paint. voir moins | |
| DeuRheo 202P | Elementis 海名斯特殊化学 | DeuRheo 202P is a dispersed polyethylene wax slurry solvent for anti-settling. It is an agent to effectively work with pigment by having anti-settling properties. The slurry appearance is suitable for high shear grinding and dispersion equipment. Pigment ...voir plus DeuRheo 202P is a dispersed polyethylene wax slurry solvent for anti-settling. It is an agent to effectively work with pigment by having anti-settling properties. The slurry appearance is suitable for high shear grinding and dispersion equipment. Pigment anti-settling effect helps avoid the deposition of becoming hard in the bottom of the tank. voir moins | |
| DeuRheo 211F | Elementis 海名斯特殊化学 | DeuRheo 211F is an aromatic free polyethylene wax dispersion anti-settling solvent, which can be handled easily and dispersed rapidly. | |
| DeuRheo 212 | Elementis 海名斯特殊化学 | DeuRheo 212 is polyethylene wax dispersion anti-settling solvent for highly efficient control of pigment settling. | |
| DeuRheo 2810 | Elementis 海名斯特殊化学 | DeuRheo 2810 is a liquid rheology modifer for solvent based coatings. It does not require specific activation temperature while incorporated. | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 is an aqueous associative thickener based on polyurethane. It provides higher viscosity at low shear rate. | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A is an aqueous associative thickener based on polyurethane. Provide thickening and flowing. | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F is a nonionic synthetic associative thickener (NiSAT) for aqueous applications to increase medium shear viscosity and provide good flowing. It is designed to be free of Tin, APEO and organic solvents. | |
| DEXICOL SH | DEX-VIN POLYMERS PVT LTD | DEXICOL SH is an externally plasticized polyvinyl acetate dispersion in water. This product appears as a milky white, free-flowing viscous liquid. It can be used in adhesives for wood furniture, fixing ceramic tiles, wall paper, paper boards, paper labe...voir plus DEXICOL SH is an externally plasticized polyvinyl acetate dispersion in water. This product appears as a milky white, free-flowing viscous liquid. It can be used in adhesives for wood furniture, fixing ceramic tiles, wall paper, paper boards, paper labels, and in bookbinding and packaging. voir moins | |
| DEXICRYL 0590D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and...voir plus DEXICRYL 0590D is an aqueous dispersion of a styrene acrylic copolymer. This product has a high binding power, which allows it to be used in primer formulations, liquid membranes, textured finishes, and sealants. It can be used in building adhesives and primers as well. voir moins | |
| DEXICRYL 0591D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives...voir plus DEXICRYL 0591D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in manufacturing primers, liquid membranes, textured finishes, and sealants. It can also be used in tile adhesives and panel adhesives. voir moins | |
| DEXICRYL 07V03 H (Hard) | DEX-VIN POLYMERS PVT LTD | DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or p...voir plus DEXICRL 07V03 H (Hard) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It can be used to make building adhesives, such as tile or panel adhesives. voir moins | |
| DEXICRYL 07V03 S (Soft) | DEX-VIN POLYMERS PVT LTD | DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as ti...voir plus DEXICRYL 07V03 S (Soft) is an aqueous dispersion of a VAM VEOVA 10 copolymer. This product's high binding power makes it suitable for the manufacture of primers, textured finishes and sealants. It is primarily used to make building adhesives, such as tile or panel adhesives. voir moins | |
| DEXICRYL 16V03 | DEX-VIN POLYMERS PVT LTD | DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or ...voir plus DEXICRYL 16V03 is an aqueous dispersion of a VAM VEOVA 10 co-polymer. This product's high binding power makes it suitable for use in the manufacture of primers, textured finishes, and sealants. It is primarily used in building adhesives such as tile or panel adhesives. voir moins | |
| DEXICRYL 492D | DEX-VIN POLYMERS PVT LTD | DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and p...voir plus DEXICRYL 492D is an aqueous dispersion of an acrylic ester-styrene copolymer. This product's high binding power makes it suitable for use in the manufacture of primers, liquid membranes, textured finishes, and sealants. It can also be used in tile and panel adhesives. voir moins | |
| DEXICRYL CML | DEX-VIN POLYMERS PVT LTD | DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhe...voir plus DEXICRYL CML is an aqueous dispersion of an acrylic ter-polymer. This product provides light stability, weathering, and acid and alkali resistance. It can be used in gloss paints, primers, texture finishes, binders for clear aggregate coatings, and adhesives. voir moins | |
| Di Isopropyl Ether | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Di Isopropyl Ether is an organic compound with the formula C6H14O. It has multiple applications for use in the production of solvents used in paints, waxes, dyes and resins such as paint thinners and stain removers. | |
| Diacetone Acrylamide (DAAM) | Beijing RBL Chemicals Co., Ltd. | Diacetone Acrylamide (DAAM) is a monomer capable of forming polymers and copolymers with exceptional ease, because of its reactivity and solubility characteristics. This product appears as a white powder or crystalline flake, and it can be used in water-b...voir plus Diacetone Acrylamide (DAAM) is a monomer capable of forming polymers and copolymers with exceptional ease, because of its reactivity and solubility characteristics. This product appears as a white powder or crystalline flake, and it can be used in water-borne coatings and adhesives. voir moins | |
| Diamino Modified Polysiloxane R-8105 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8105 is an amino modified polysiloxane. It maintains good amino reaction activity and coupling effect, and it provides better storage activity and low volatility. This product is widely used in modified plastics and coating applications. | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division 巴斯夫中间体 | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...voir plus Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. voir moins | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...voir plus Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. voir moins | |
| Dibutyl Maleate (DBM) | Shandong Yuanli Science and Technology Co., Ltd. | Dibutyl Maleate (DBM) is a colorless transparent oily liquid that is insoluble in water, but soluble in alcohol and most solvents. This dibasic acid ester can be used for synthesis and dispersing applicable to adhesives. | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| Dibutyl Phthalate (DBP) | Chemceed | Dibutyl phthalate (DBP) is a plasticizer used in applications such as adhesives, lacquers and printing inks. Dibutyl phthalate can be used as a secondary plasticizer with other phthalates for highly concentrated PVC compounds. | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...voir plus Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. voir moins | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| Dicyclopentadiene High Purity | Zibo Luhua Hongjin New Material Co., Ltd. | Dicyclopentadiene High Purity is a colorless liquid. This product is most commonly used in polyester resin applications. | |
| Die Bond GB-1 | Synasia, Inc. | Die Bond GB-1 is a silver colored, smooth, creamy thixotropic paste. It is a single component, low viscosity, high adhesion, low temperature, and fast cure electrically conductive adhesive. Die Bond GB-1 is used in adhesives for Die Attach and LED bonding...voir plus Die Bond GB-1 is a silver colored, smooth, creamy thixotropic paste. It is a single component, low viscosity, high adhesion, low temperature, and fast cure electrically conductive adhesive. Die Bond GB-1 is used in adhesives for Die Attach and LED bonding. This product is primarily used for pin transfer and stamping applications. voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division 巴斯夫中间体 | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...voir plus Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. voir moins | |
| Diethylene triamine | BASF SE, Intermediates Division 巴斯夫中间体 | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division 巴斯夫中间体 | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...voir plus Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. voir moins | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...voir plus Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. voir moins | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...voir plus Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Diisopropanolamine | BASF SE, Intermediates Division 巴斯夫中间体 | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...voir plus Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. voir moins | |
| Dimethyl Carbonate | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Dimethyl Carbonate is an organic compound with the formula C3H6O3. It has multiple applications for use in the production of; polycarbonates, pharmaceutical and pesticide, lithium battery electrolytes and as a solvent in paints, coatings and adhesives. | |
| Dimethyl Sebacate (DMS) | Chemceed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...voir plus Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. voir moins | |
| Dimethyldichlorosilane | Qufu Wanda Chemical Industry Co., Ltd. | Dimethyldichlorosilane is a colorless transparent liquid is used as coating for silicon and glass surfaces, and in the production of silicone polymers. This product contains chlorine atoms which can produce a more rubbery polymer. | |
| Dioctyl Adipate (DOA) | Chemceed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...voir plus Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. voir moins | |
| Dioctyl Maleate (DOM) | Shandong Yuanli Science and Technology Co., Ltd. | Dioctyl Maleate (DOM) is a colorless transparent liquid and a dibasic acid ester that contains strong physical and chemical performance. It can be applied to adhesives. | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...voir plus Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...voir plus Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. voir moins | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...voir plus Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. voir moins | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| Disodium Sebacate (DSS) | Chemceed | Disodium Sebacate is a castor oil derivative which can be used in cosmetics, detergents, and as a corrosion inhibitor lubricants. | |
| DISPERBYK®-118 | BYK 毕克 | DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...voir plus DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. voir moins | |
| DISPERBYK-168 TF | BYK 毕克 | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-180 | BYK 毕克 | Wetting and dispersing additive for aqueous, solvent-based and solvent-free adhesives and sealants. | |
| DISPERBYK®-190 | BYK 毕克 | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-191 | BYK 毕克 | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-192 | BYK 毕克 | Wetting and dispersing additive for aqueous adhesives and sealants. | |
| DISPERBYK®-199 BF | BYK 毕克 | DISPERBYK®-199 BF is a VOC-free wetting and dispersing additive for stabilizing organic and inorganic pigments in aqueous coatings, adhesives, pigment concentrates and care products. Biocide-free version of DISPERBYK-199. |
