| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup)...voir plus Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Bayhydur® XP 2547 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily di...voir plus Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily dispersed in the aqueous phase. It is used primarily as the crosslinking agent for waterborne polyol binders (Bayhydrol®). The dispersibility of the product in water is influenced by organic cosolvents. voir moins | |
| Desmodur® CD-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because...voir plus Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because the composition of the product is consistent with guideline EC 2002/72 and conforms to FDA 175 105. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, and a hydrolysable chlorine content of maximum 50mg/kg. voir moins | |
| Desmodur® CD-S | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and ...voir plus Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and of low viscosity at room temperature and crystallizes at lower temperatures. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, a hydrolysable chlorine content of maximum 50mg/kg, and a density (20°C) of 1.21kg/l. voir moins | |
| Desmodur® DA-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused b...voir plus Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids. These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as a crosslinking agent for largely pH-neutral aqueous polymer dispersions, such as polyurethane, polyvinylacetate, polyacrylate and synthetic rubber dispersions. Crosslinking raises the resistance of the bonds to heat, water, plasticizers and numerous solvents. This product has an NCO content of 20.0 ± 1%, a viscosity at 23°C of 3,000 ± 600 mPa·s, and a monomeric HDI of ≤ 0.25%. voir moins | |
| Desmodur® DN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These h...voir plus Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking increases the resistance of the bonds to heat, water, plasticisers and many solvents. Compared with Desmodur® DA, Desmodur® DN is characterised by its much lower viscosity and is not prone to turbidity at low storage temperatures. This product has an NCO content of 21.8 ± 0.5%, a viscosity at 23°C (rotation) of 1,250 ± 300 mPa·s, and an HDI monomer content of ≤ 0.25%. voir moins | |
| Desmodur® PC-N | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity a...voir plus Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity at temperatures above 15°C that crystallizes at lower temperatures. It has an NCO content of 26.0 ± 1.0%, a vapor pressure at 20°C (MDI) of < 10^-5 hPa, and a density 25°C of 1.22g/cm^3. Desmodur® PC-N can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® PC-N is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Desmodur® RE | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RE is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate. It is a crosslinker for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials. It is a ellow-green or red-brown to dark vio...voir plus Desmodur® RE is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate. It is a crosslinker for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials. It is a ellow-green or red-brown to dark violet liquid, but the colour does not influence the quality of the bonds. The product may contain flaky deposits. This product has an NCO content of 9.3 ± 0.2%, a non-volatile content of approx. 27%, and a density at 20°C approx. 1.0g/cm^3. After adding Desmodur® RE, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes in-creasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® RFE | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RFE is a solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate. It is a crosslinker with universal suitability for adhesives based on Desmocoll, natural or synthetic rubber with special adhesion on rubber materials. This product ha...voir plus Desmodur® RFE is a solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate. It is a crosslinker with universal suitability for adhesives based on Desmocoll, natural or synthetic rubber with special adhesion on rubber materials. This product has an NCO content of 7.2 ± 0.2%, a non-volatile content of approx. 27%, and a density at 20°C of approx. 1.0g/cm^3. After adding of Desmodur® RFE, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes increasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® RN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RN is a solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. It is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-colored adhesives used to bond rubber mat...voir plus Desmodur® RN is a solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. It is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-colored adhesives used to bond rubber materials. . The use of suitable adhesives yields bonds which undergo minimal discoloration on exposure to light. This product has an NCO content of 7.2 ± 0.3%, a non-volatile content of approx. 40%, and a density at 20°C of approx. 1.04g/cm^3. After adding of Desmodur® RN, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes increasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® VK 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. Thi...voir plus Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, that may partially crystallise at lower temperatures. It has an NCO content of 31.5 ± 1.0%, a viscosity 25°C 90 ± 20 mPa·s, a pot life of 12 - 16 min., and a vapor pressure at 20°C (MDI) < 10^-5 hPa. Desmodur® VK 10 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 10 is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Desmodur® VK 10 L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VK 10 L is a mixture of diphenylmethane-4,4-diisocyanate with isomers and higher functional homologues. It is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscos...voir plus Desmodur® VK 10 L is a mixture of diphenylmethane-4,4-diisocyanate with isomers and higher functional homologues. It is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, which may partially crystallize at lower temperatures. Desmodur® VK 10 L has an phenyl isocyanate content of max. 50mg/kg, a pot life of 17 - 20 min., and a vapor pressure at 20°C (MDI) of < 10^-5 hPa. Desmodur® VK 10 L can be combined with Baycoll® in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 10 L is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. voir moins | |
| Desmodur® VKS 20 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VKS 20 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It ...voir plus Desmodur® VKS 20 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C that may partially crystallize at lower temperatures. This product has a vapor pressure at 20°C (MDI) of < 10^-5 hPa, an phenyl isocyanate content of max. 50mg/kg, and a viscosity (25°C) of 200 ± 40 mPa·s, and an NCO content of 31.5 ± 1.0%. Desmodur® VKS 20 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. It is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapor pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...voir plus Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. voir moins | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. | |
| Polydo DP-3000 | Kukdo Chemical Co., Ltd. | Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...voir plus Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-400 | Kukdo Chemical Co., Ltd. | Polydo DP-400 polyether polyol is 400 molecular weight polyether diol. It is applied to a variety of applications. DP-400 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. | |
| Polydo DP-4000 | Kukdo Chemical Co., Ltd. | Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...voir plus Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-4000E | Kukdo Chemical Co., Ltd. | Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast e...voir plus Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...voir plus Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. voir moins | |
| Polydo ED-500 | Kukdo Chemical Co., Ltd. | Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo ED-750 | Kukdo Chemical Co., Ltd. | Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo GY-1000 | Kukdo Chemical Co., Ltd. | Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...voir plus Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-250 | Kukdo Chemical Co., Ltd. | Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...voir plus Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-3000 | Kukdo Chemical Co., Ltd. | Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...voir plus Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. voir moins | |
| Polydo GY-3000E | Kukdo Chemical Co., Ltd. | Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers. | |
| Polydo GY-3010E | Kukdo Chemical Co., Ltd. | Polydo GY-3010E polyether polyol is a glycerine initiated, nominal 3,000 molecular weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-3300E | Kukdo Chemical Co., Ltd. | Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell...voir plus Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell-opener for high resilient flexible foam and cold molded flexible foam. voir moins | |
| Polydo GY-3500 | Kukdo Chemical Co., Ltd. | Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-4000 | Kukdo Chemical Co., Ltd. | Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...voir plus Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. voir moins | |
| Polydo GY-420 | Kukdo Chemical Co., Ltd. | Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing ...voir plus Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing materials. Foam density can be varied with formulation. voir moins | |
| Polydo GY-5000E | Kukdo Chemical Co., Ltd. | Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...voir plus Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-5100 | Kukdo Chemical Co., Ltd. | Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot...voir plus Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-6000E | Kukdo Chemical Co., Ltd. | Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...voir plus Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-600E | Kukdo Chemical Co., Ltd. | Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most p...voir plus Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-700 | Kukdo Chemical Co., Ltd. | Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...voir plus Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-750P | Kukdo Chemical Co., Ltd. | Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with ot...voir plus Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo PN-400 | Kukdo Chemical Co., Ltd. | Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...voir plus Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. voir moins | |
| Polydo PN-560 | Kukdo Chemical Co., Ltd. | Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...voir plus Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. voir moins | |
| Polydo SC-357 | Kukdo Chemical Co., Ltd. | Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...voir plus Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-381 | Kukdo Chemical Co., Ltd. | Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...voir plus Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-400 | Kukdo Chemical Co., Ltd. | Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the p...voir plus Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. voir moins | |
| Polydo SC-450 | Kukdo Chemical Co., Ltd. | Polydo SC-450 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the pre-polymer process. | |
| Polydo SC-4508 | Kukdo Chemical Co., Ltd. | Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or i...voir plus Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...voir plus Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-490 | Kukdo Chemical Co., Ltd. | Polydo SC-490 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the prepolymer process. | |
| Polydo ST-480 | Kukdo Chemical Co., Ltd. | Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...voir plus Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation prepolymer process. voir moins | |
| Polydo ST-481 | Kukdo Chemical Co., Ltd. | Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...voir plus Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo TD-400 | Kukdo Chemical Co., Ltd. | Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...voir plus Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. voir moins | |
| Polydo TD-405 | Kukdo Chemical Co., Ltd. | Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...voir plus Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. voir moins | |
| Polydo TE-360 | Kukdo Chemical Co., Ltd. | Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration,...voir plus Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, transportation and construction applications. voir moins | |
| Prisorine 3501 | Cargill Industrial Specialties | Prisorine 3501 s a liquid, long-chain hydrocarbon with excellent color and thermo-oxidative stability for automotive and industrial coatings. | |
| Silane USi-6MO | Nanjing Union Silicon Chemical Co., Ltd. | Silane USi-6MO is an alkyl silane/non-organoreactive alkoxysilane. This product appears as a colorless to yellowish transparent liquid. It can be used as a curing agent and crosslinker for sealants. | |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...voir plus VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. voir moins | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...voir plus VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. voir moins | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...voir plus VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. voir moins | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...voir plus VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. voir moins | Request Sample |
