| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...voir plus Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. voir moins | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...voir plus Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. voir moins | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...voir plus Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. voir moins | |
| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Baybond® PU 330 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinfor...voir plus Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent film-forming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 403 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± ...voir plus Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± 1, a flow time at 23°C, (4mmcup) of 11-18, and a pH value at 20°C (supply form) of 6.0-8.0. Baybond® PU 403 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 403 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. The mechanical film properties of the product are enhanced by post-crosslinking at temperatures from 170°C for a duration of 30 minutes. Baybond® PU 403 is also very stable against shear forces. voir moins | |
| Baybond® PU 405 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125...voir plus Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis. voir moins | |
| Baybond® PU 406 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a f...voir plus Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a flow time at 23°C, (4mmcup) of 10-22, and a pH value at 20°C, (supply form) of 5.5-7.5. voir moins | |
| Baybond® PU 407 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...voir plus Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. voir moins | |
| Baybond® XP 2728 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90,...voir plus Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90, and a pH value of 7-9. Baybond® XP 2728 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. The product exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. voir moins | |
| Bayhydrol® A 2058 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 -...voir plus Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 - 45, a pH (1:3 in demineralised water) of 7.5 - 9.5, and a viscosity at 23°C, (approx.D=82s-1) of 200 - 2,000. Bayhydrol® A 2058 combined with Bayhydur 3100 yields high-gloss flexible top coats which are resistant to solvents. The formulation can be applied as a one-coat system on many substrates and has good adhesion and body. Two-pack primers can be formulated by combining Bayhydrol® A 2058 with Bayhydur® 3100. These are highly suitable for use on thermoplastics and thermosets and are characterised by excellent adhesion, sandability and water resistance. voir moins | |
| Bayhydrol® A 2139/2 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / ...voir plus Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C/convection oven) of 45-49, a viscosity at 23°C, (D = approx. 40 s-1) of 1,000 - 2,500, an acid value of 11.5 - 14.5, and a pH (1:4 in demineralised water) value of 6.8 - 7.9. Bayhydrol® A 2139/2 can be combined with Bayhydur® 3100 to yield highgloss solvent-resistant top coats. It is used as a one-coat top coat on many substrates, it has good adhesion and high body. When combined, it can also be used to formulate two-component primers for many thermoplastics and thermosets. voir moins | |
| Bayhydrol® A 2227/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with hi...voir plus Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41-43, a viscosity at 23°C, (D = approx. 40 s-1) of 700 - 2,500, an acid value of 7-10, and a pH (1:3 in demineralised water) of 7,5 - 8,5. Bayhydrol® A 2227/1 is characterised by its good pigment wetting properties and high shear stability. Bead and sand mills have proved suitable as grinding equipment. Grinding temperatures of up to approx. 50°C have no detrimental effect on quality of the coating. Given the many different pigments available, the storage stability should always be tested. The rutile titanium dioxide pigments of the Tronox range, especially Tronox® R-KB-4, are particularly suitable. voir moins | |
| Bayhydrol® A 2290 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection o...voir plus Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 43-47, a viscosity at 23°C, D=approx.40s-1 of 200-2,000, and an acid value of 11-13. Bayhydrol® A 2290 is a polyester polyacrylate dispersion which has already been neutralized with dimethylethanolamine. It has good hydrolysis stability and can be thinned with water for application. It is preferably combined with Bayhydur® 3100, Bayhydrol® A 2290 can be used to formulate high gloss, solvent-resistant and tar-resistant top-coats. On many substrates, good adhesion with a good build can be achieved when the formulation is applied as a one-coat finish. voir moins | |
| Bayhydrol® A 2427 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/...voir plus Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/1 h/125°C, convection oven) of 41-44, a viscosity at 23°C, (D=ca.40s-1) of max. 100, and a pH (1:3 in demineralised water) of 8-9. Bayhydrol® A 2427 is preferably combined with anionic hydrophilically modified polyisocyanates such as Bayhydur® XP 2487/1 to formulate transparent and pigmented primers and topcoats. Topcoats based on Bayhydrol® A 2427 and Bayhydur® XP 2487/1 are characterized by their good chemical resistance properties, especially their resistance to discoloring liquids. voir moins | |
| Bayhydrol® A 2457 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C ...voir plus Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38.5 - 41.5, a viscosity at 23°C, D=approx.42s-1 of max. 100, and a pH (1:3 in demineralised water) value of 7.5-9. Due to its outstanding mechanical and chemical resistance properties the product is ideally suited for the formulation of sealers for mineral substrates and reactive resins (EP, PU). In combination with other water-reducible binders, the many potential combination products, compatibility must always be tested. voir moins | |
| Bayhydrol® A 2470 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile con...voir plus Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1h / 125°C / convection oven) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. Bayhydrol® A 2470 is a hydroxyfunctional polyacrylic dispersion which can be thinned with water to application viscosity. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10% solution of dimethyl ethanol amine. voir moins | |
| Bayhydrol® A 2620 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and ...voir plus Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and industrial coating applications. This product has an acid number of approx. 9.8, a hydroxyl content (solvent free, calculated) of approx. 3.0, and a density at 20°C of approx. 1,07. Bayhydrol® A 2620 can be used in combination with aliphatic polyisocyanates for the formulation of high-gloss clearcoats and top-coats which can be dried at room temperature or force-dried, e.g. at 130°C. The cured paint films are hard but flexible, with good resistance to solvents, water and chemicals and also exhibit good UV stability. voir moins | |
| Bayhydrol® A 2646 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl co...voir plus Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl content, (supply form) of approx. 2.7, and a density at 20°C of approx. 1.06. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of hard, high-gloss sealers for mineral substrates and reactive resins (EP, PUR). Furthermore, good accentuation of the grain of the substrate (e.g. colored coatings) is achieved. The binder can also be used for the formulation of high-grade low VOC coatings for use on substrates such as wood, metal, plastic, etc. voir moins | |
| Bayhydrol® A XP 2469 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (...voir plus Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (calculated on solid resin) of approx. 2.5, an acid value of approx. 8, a flash point that is not flammable up to boiling point, and a density at 20°C of approx. 1.06. Bayhydrol® A XP 2469 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimum water-soluble content should be used. Given the many pigments and extenders available, compatibility testing should always be carried out. voir moins | |
| Bayhydrol® A XP 2695 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash poin...voir plus Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash point up to initial boiling point) of > 95, and a density at 20°C of approx. 1.06. This product is mainly for air and forced drying coating systems with a very high chemical resistance. The cured paint films are hard, tough but flexible, glossy and high-bodied with good weather stability, lightfastness and superior chemical resistance. The application of a clearcoat based on Bayhydrol® A XP 2695 directly on wood may lead to discoloration. voir moins | |
| Bayhydrol® PR 435 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...voir plus Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. voir moins | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...voir plus Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. voir moins | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...voir plus Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. voir moins | |
| Bayhydrol® U XP 2750 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a...voir plus Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 3.6. Bayhydrol® U XP 2750 is a hydroxyfunctional polycarbonate ester-polyurethane dispersion which can be thinned with water to application viscosity. It is a two-component polyurethane hydrocoatings based on Bayhydrol® U XP 2750 are characterized by high weathering resistance (gloss-retention, resistance to cracking), good appearance (high gloss, low haze value) and very high reflow-behavior after dry-or weet-scratching. voir moins | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...voir plus Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. voir moins | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...voir plus Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. voir moins | |
| Bayhydrol® UH 2305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This p...voir plus Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This product has an efflux time at 23°C, (4mmcup) of 11-18, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-8.5. Bayhydrol® UH 2305 can be used as a combination binder with hydroxy-functional resins, primarily Bayhydrol® U XP 2428, in the formulation of highly flexible two-component polyurethane top coats, e.g. soft-feel systems. After crosslinking with, for example, Bayhydur® 3100, force-drying (e.g. 30 - 45 min at 80 °C) yields films with a pleasant handle and good resistance to abrasion and water. voir moins | |
| Bayhydrol® UH 2342 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g ...voir plus Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) level of 6.7-8.2. Due to the product's mechanical and chemical resistance properties, especially its black heel mark resistance, it is ideally suited for the formulation of parquet sealers. A combination with other water-reducible binders is possible because of the many potential combination products. voir moins | |
| Bayhydrol® UH 240 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasio...voir plus Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasion/water. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6-8, and a mean particle size of max. 210. Bayhydrol® UH 240 can be used in combination with hydrofunctional resins, preferably Bayhydrol® U XP 2428, and U 355 either U 475, in the formulation of highly flexible two-component polyurethane top coats (e.g. in soft-feel coating systems). After cross-linking, Bayhydur® 3100 force-drying (e.g. 30 - 45 min at 80°C) yields films with good surface handle and good resistance to abrasion and water. voir moins | |
| Bayhydrol® UH 2557 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1...voir plus Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) of 7-9. Due to its mechanical and chemical resistances, in particular black heel mark resistance, the product is particularly well suited for the formulation of parquet sealers. Post-curing of such coatings with Bayhydur®, for example, brings additional advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. voir moins | |
| Bayhydrol® UH 2558 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...voir plus Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. voir moins | |
| Bayhydrol® UH 2593/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...voir plus Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. voir moins | |
| Bayhydrol® UH 2606 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmc...voir plus Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC floor coatings, the binder exhibits a high grade property profile on a variety of substrates. Filler and topcoat applications (one and two-component) are also plausible. Other possibilities are wood and furniture applications. Bayhydrol UH 2606 yields coatings with good leveling, chemical and weather stabilities. They are also characterized by a tough but flexible property profile. Very good combinations are possible with polyester, polyurethane and acrylic dispersions, and combinations with waterborne UV systems are possible. Resistances can also be improved by post-curing with e.g. Bayhydur®. The mixing ratio of mill base to hardener is generally 10:1. voir moins | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...voir plus Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. voir moins | |
| Bayhydrol® UH 340/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flex...voir plus Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flexibility of water-thinnable coatings. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, a pH value of 6-7, and a mean particle size of 120-220. Bayhydrol® UH 340/1 can be used as the sole binder in the formulation of flexible lightfast coatings. The product is also suitable for combination with other water-thinnable binders. The pH of ready-to-use coatings should be between 7 and 8. Substances such as ammonia can be used to adjust the pH. Yellowing has sometimes been observed on maple. voir moins | |
| Bayhydrol® UH 650 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch ...voir plus Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch coatings. This product has an Efflux time at 23°C, (4mmcup) of 12-30, a non-volatile content (1g / 1h / 125°C) of 48-52, and a pH value of 6-8. When used in two-layer systems with two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 650 are characterized by good adhesion to many types of plastics, good overcoatability and good water resistance. The metallic basecoat can be oversprayed with a two-component polyurethane clearcoat after predrying e.g. for 5 min at an ambient temperature of 80°C or for 15 min at room temperature. voir moins | |
| Bayhydrol® UH XP 2592 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used f...voir plus Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used for general industrial finishes. This product has an acid value of approx. 12, a viscosity at 23°C, (D=approx.40s-1) of approx. 300, a non-volatile content (1g / 1h / 125°C) of approx. 45, and a pH (1:4 in demineralised water) of approx. 7.2. Bayhydrol® UH XP 2592 does not contain any cosolvents, no anti skinning agents and no driers and is therefore label-free. Coatings based on this resin show a quick drying and after drying a quite high hardness. After curing over night a very good water-resistance is achievable. High-gloss coatings, however, need a certain amount of suitable co-solvents and additional amine in the formulation. Bayhydrol® UH XP 2592 can be used as universal resin for high-gloss top coats, effect coats and - due to its excellent anti-corrosion properties – as raw material for primers and single coats. voir moins | |
| Bayhydrol® UH XP 2660 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volati...voir plus Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH (10% in water) of 6-8. Bayhydrol® UH XP 2660 can be used as a binder in combination with hydrofunctional resins, preferably Bayhydrol® U 355 or U 475, in the formulation of highly flexible two-component polyurethane topcoats (e.g. in soft-touch coating systems). When crosslinking with e.g. Bayhydur® 3100, force drying (e.g. 30-45 min at 80°C) yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability. voir moins | |
| Bayhydrol® UH XP 2719 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of ap...voir plus Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of approx. 100, a minimum film-forming temperature of 21, and a density of 1,06. The product is characterized by fast drying and good blocking resistance. It can be used in both one-component and two-component formulations, and can also be combined with other anionic, hydrophilized dispersions, such as polyacrylate and polyurethane dispersions. voir moins | |
| Bayhydrol® UV 2282 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content ...voir plus Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content (1g / 1h / 125°C) of 39 ± 1, and a pH level of 7.75 ± 0.75. Bayhydrol® UV 2282 is used in the formulation of High Quality Waterborne UV-curing Wood coatings, that will normally pass the DIN 68 861-1B norm. After the water has evaporated, the coating is physically dry and handable. UV-Curing (10 m/min per 80 W/cm lamp) will result in a very high final quality. The photo initiator demand is low, 1-2% will be enough (by wt., calculated on solid binder). Coatings based on Bayhydrol® UV 2282 will show good adherence to many substrates, including plastics. voir moins | |
| Bayhytherm® 3146 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems ...voir plus Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems such as waterborne fillers or general purpose industrial coatings. Coating films based on Bayhytherm® 3146 exhibit extraordinary impact strength, adhesion and overcoatability. Bayhytherm® 3146 can also be used as an additive to conventional waterborne stoving systems to improve flexibility, impact strength and adhesion. voir moins | |
| Baymedix® CD102 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...voir plus BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| Desmodur® BL 3272 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3272 MPA is an aliphatic crosslinking stoving urethane resin used in combination with Desmophen® and Alkynol® grades to formulate lightfast, one-pack stoving polyurethane coatings; as an additive in conventional stoving systems to improve the...voir plus Desmodur® BL 3272 MPA is an aliphatic crosslinking stoving urethane resin used in combination with Desmophen® and Alkynol® grades to formulate lightfast, one-pack stoving polyurethane coatings; as an additive in conventional stoving systems to improve the flexibility and adhesion. This product has a non-volatile content (0.2 g/60 min/80°C) of 72 ± 2%, a viscosity at 23°C of 2,700 ± 750 mPa·s, and a color value (hazen) of ≤ 60. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improv...voir plus Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion. This product has a viscosity at 23°C of 1,000 ± 300 mPa·s, a color value (Iod) of ≤ 4, and a flash point of approximately 41°C. voir moins | |
| Desmolac® 4340 X/IB | Covestro (formerly Bayer MaterialScience) 科思创 | Desmolac® 4340 X/IB is a non-reactive linear polyurethane based on IPDI, with approx. 40 % in xylene/isobutanol (51:9). It is used as a binder for physically drying primers and finishes for plastics. This product has a non-volatile content (1g/1h/125°C) o...voir plus Desmolac® 4340 X/IB is a non-reactive linear polyurethane based on IPDI, with approx. 40 % in xylene/isobutanol (51:9). It is used as a binder for physically drying primers and finishes for plastics. This product has a non-volatile content (1g/1h/125°C) of 40 ± 1%, a viscosity at 23°C of 7,500 ± 1,500 mPa·s, a hazen color value of ≤ 150, a density at 20°C of approx. 0,94g/ml, and a flash point of approx. 22°C. Pigment preparations such as Bayderm® Colours B-TO and C-TO (Bayer) are recommended for colouring formulations. It is also possible to use standard pigments or pigment/extender combinations. The solvent resistance of films based on Desmolac® 4340 X/iB can be greatly improved by the addition of Desmodur® N 75 (10 to 20 %, calculated on the solid resin). This will result in post-crosslinking of the film with atmospheric moisture after 1 to 2 weeks. However, Desmodur® N 75 should not be added until just before application of the coating to prevent reaction with the isobutanol in the solvent mixture of the supply form. voir moins | |
| Desmophen® C 2200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very...voir plus Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a viscosity at 75°C 2,300 ± 750 mPa·s, a density at 20°C of approx. 1.14g/cm^3. voir moins | |
| Dispercoll® U 58 | Covestro (formerly Bayer MaterialScience) 科思创 | Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make ...voir plus Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance. voir moins | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...voir plus Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. voir moins | |
| GENOMER* 4188/EHA | Rahn AG | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...voir plus GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. voir moins | Request Sample |
| GENOMER* 4188/M22 | Rahn AG | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...voir plus GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. voir moins | Request Sample |
| GENOMER* 4205 | Rahn AG | GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives. | Request Sample |
| GENOMER* 4212 | Rahn AG | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...voir plus GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. voir moins | Request Sample |
| GENOMER* 4215 | Rahn AG | GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PV...voir plus GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PVC flooring; adhesives; and plastic varnishes. voir moins | Request Sample |
| GENOMER* 4215/M22 | Rahn AG | GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic fo...voir plus GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. voir moins | Request Sample |
| GENOMER* 4217 | Rahn AG | GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulati...voir plus GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulations producing strong, but still flexible films. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastic and metal; wood coatings; flexo inks; and screen inks. voir moins | Request Sample |
| GENOMER* 4230 | Rahn AG | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...voir plus GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. voir moins | Request Sample |
| GENOMER* 4247 | Rahn AG | GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...voir plus GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. voir moins | Request Sample |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...voir plus GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. voir moins | Request Sample |
| GENOMER* 4259 | Rahn AG | GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...voir plus GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. voir moins | Request Sample |
| GENOMER* 4267 | Rahn AG | GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are req...voir plus GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems. voir moins | Request Sample |
| GENOMER* 4269/M22 | Rahn AG | GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and var...voir plus GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and varnishes for plastic foils (PVC, PE etc.). The cured oligomer provides excellent mechanical properties. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 4277 | Rahn AG | GENOMER* 4277 is an aliphatic urethane acrylate. It is a resin for radically coatings. It provides high flexibility and toughness, good adhesion, and high viscosity. | Request Sample |
| Nouveau! GENOMER* 4281 | Rahn AG | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...voir plus GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. voir moins | Request Sample |
| GENOMER* 4302 | Rahn AG | GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen an...voir plus GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen and decor varnishes; paper and board coatings premiums; and industrial coatings. The product provides outstanding weatherability and mechanical properties. The product is used as the sole oligomer or in association with other urethane acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 4312 | Rahn AG | GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and pla...voir plus GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. voir moins | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...voir plus GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. voir moins | Request Sample |
| GENOMER* 4316 | Rahn AG | GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood an...voir plus GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. voir moins | Request Sample |
| GENOMER* 4335 | Rahn AG | GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...voir plus GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. voir moins | Request Sample |
| GENOMER* 4337 | Rahn AG | GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overpr...voir plus GENOMER* 4337 is an aliphatic urethane acrylate with high reactivity and good flexibility combined with excellent abrasion and stain resistance. It is ideal for use in industrial coatings, coatings on plastic, wood coatings, 3d/am formulations, and overprint varnishes. voir moins | Request Sample |
| GENOMER* 4383/W | Rahn AG | GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, ...voir plus GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, and good solvent resistance. This product may be cross-linked by used of UV-irradiation with a suitable initiator. GENOMER* 4383/W is recommended for wood and industrial coatings. voir moins | Request Sample |
| GENOMER* 4425 | Rahn AG | GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are require...voir plus GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are required. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastics and metal; wood coatings; flexo inks; and screen inks. voir moins | Request Sample |
| GENOMER* 4514 | Rahn AG | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...voir plus GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. voir moins | Request Sample |
| GENOMER* 4515 | Rahn AG | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...voir plus GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. voir moins | Request Sample |
| GENOMER* 4590/PP | Rahn AG | GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...voir plus GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. voir moins | Request Sample |
| GENOMER* 4622 | Rahn AG | GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used ...voir plus GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used in concentrations from 5 up to 50% in association with urethane, polyester or epoxy acrylates. voir moins | Request Sample |
| GENOMER* 4690 | Rahn AG | GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems whe...voir plus GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. This product is specifically recommended for use in the following applications: hard coats on plastic; top coats on wood; and coatings on paper, board, wood and plastics. voir moins | Request Sample |
| GENOMER* 4691 | Rahn AG | GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...voir plus HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. voir moins | Request Sample |
| Impranil® 43031 Lösung | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® 43031 Lösung is a one-component polyester urethane based on an aliphatic diisocyanate. It has a viscosity at 23°C of 7,000-15,000 mPa·s, and a non-volatile content (0.9–1.1g/1h/125°C, convection oven) of 25 ± 1°C. Impranil® 43031 solution is use...voir plus Impranil® 43031 Lösung is a one-component polyester urethane based on an aliphatic diisocyanate. It has a viscosity at 23°C of 7,000-15,000 mPa·s, and a non-volatile content (0.9–1.1g/1h/125°C, convection oven) of 25 ± 1°C. Impranil® 43031 solution is used as a topcoat and finish for PVC coatings requiring high surface smoothness and reduced migration of PVC plasticizers. It is also suitable for use as a topcoat for lining materials, especially for shoe linings with an adhesive polyurethane coating and for polyurethane, PVC and polyacrylate foams used on suitable non-wovens, wovens, knitted fabrics and coagulated substrates. Impranil® 43031 solution is also used as the harder component in blends with other aliphatic Impranil® and Desmoderm® Finish products. voir moins | |
| Impranil® C | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® C is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. It has a viscosity at 23°C (30% in Ethylacetat gelöst) of 27,000-53,000 mPa·s. This product is suitable for for...voir plus Impranil® C is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. It has a viscosity at 23°C (30% in Ethylacetat gelöst) of 27,000-53,000 mPa·s. This product is suitable for formulating coatings with medium-hard handle for use in many different textile applications such as, protective clothing, sportswear, tarpaulins, awnings, fire hoses and sleeping bad undersides. This product has good adhesion, good resistance to hydrolysis, good weather stability, high abrasion resistance and resistance to dry cleaning. voir moins | |
| Impranil® C Solution | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® C Solution is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. This product has a viscosity at 23°C of 27,000-53,000 mPa·s, and a non-volatile content (0.9-1.1g / 1h...voir plus Impranil® C Solution is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. This product has a viscosity at 23°C of 27,000-53,000 mPa·s, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 30 ± 1%. It is suitable for formulating coatings with medium-hard handle for use in many different textil applications such as, covers for containers, light conveyer belts, camping articles and ironing board covers. This product offers good adhesions, resistance to dry cleaning, high abrasion resistant, good weather stability, and good resistance to hydrolysis. voir moins | |
| IMPRANIL® DAH | Covestro (formerly Bayer MaterialScience) 科思创 | An anionic, aromatic polyether-polyurethane dispersion used as a flexible tie coat applied by the transfer coating process in the manufacture of materials for outerwear, bags/luggage, shoes and athletic shoes. | |
| Impranil® DL 1380 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special propert...voir plus Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special properties include high flexibility, good lightfastness, high solid content, soft handle and is suitable for mechanical foaming. This product has a flow time at 23°C (4mmcup) < 90s, a pH values of 6-8, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) 57-61%. voir moins | |
| Impranil® DL 1537 | Covestro (formerly Bayer MaterialScience) 科思创 | Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include ve...voir plus Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include very good resistance to hydrolysis, good adhesion, high solid content, good stirring stability, soft handle and is suitable for mechanical foaming. This product has a pH values of 7 ± 1, a flow time at 23°C (4mmcup) of 15-60, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 57-61. voir moins | |
| Impranil® DLC-F | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLC-F is an ionic/anionic polycarbonate ester polyurethane dispersion, and is suitable for the formulation of textile coatings for use as finish and top coat in numerous applications, such as outerwear, upholstery, technical articles, fashion sh...voir plus Impranil® DLC-F is an ionic/anionic polycarbonate ester polyurethane dispersion, and is suitable for the formulation of textile coatings for use as finish and top coat in numerous applications, such as outerwear, upholstery, technical articles, fashion she uppers, and bags/luggage. This product has a very good resistance to hydrolysis, a good resistance to aging, high scratch resistance, high lightfastness, and high flexresistance. Impranil® DLC-F has a flow time at 23°C (4mmDINcup) of 30 ± 20s, a pH values of 7.5 ± 1.0, a non-volatile content (0.9-1.1g/ 1h / 125°C) of 40 ± 1%, and a density at 23°C of approx. 1.1g/cm^3. voir moins | |
| Impranil® DLH | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLH is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings and also for coating and finishing various technical articles. It is ideally used for outerwear, bags/luggage, fashion she lea...voir plus Impranil® DLH is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings and also for coating and finishing various technical articles. It is ideally used for outerwear, bags/luggage, fashion she leather uppers, belts and conveyer belts, hoses, glass fabrics, and fabrics made from synthetic fibers. This product is free from organic solvents and emulsifiers, has a high flexibility, is suitable for mechanical foaming, has high lightfastness, and high adhesion. Impranil® DLH has a non-volatile content (0.9–1.1g/1h/125°C) of 40 ± 1%, a pH value of 6.5 ± 1, and a flow time at 23°C (4mm DIN cup) of 27 ± 13%. voir moins | |
| Impranil® DLN W 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage....voir plus Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage. With a white low-viscosity dispersion in water and a solids content of approx. 50%, Impranil® DLN W 50 is suitable for the formulation of textile coatings for use in numerous applications. It has a high solids content, good lightfast, is suitable for mechanical foaming, and high flexibility. Impranil® DLN W 50 has a density at 23°C of 1.1g/cm^3, a pH value of 6.5 ± 1, a flow time at 23°C (4mm DIN cup) of ≤ 70s, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 50 ± 1%. voir moins | |
| Impranil® DLN-SD | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for m...voir plus Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for mechanical foaming. This product is ideally used for shoe lining materials, outerwear, bags/luggage, and fashion shoe uppers. Impranil® DLN-SD has a pH value of 6.5 ± 1.5, a flow time at 23°C (4mm DIN cup) of ≤ 70s, a density at 23°C of 1.1 g/cm^3, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 40 ± 1%. voir moins | |
| Impranil® DLP | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLP is an anionic aliphatic polyester-polyurethane dispersion that has a density at 23°C of 1.1g/cm^3, a flow time at 23°C (4mm DIN cup) of 35 ± 15s, a pH value of 7 ± 1, and a non-volatile content (0.9-1.1g/1h/125°C) of 50 ± 2%. It is suitable ...voir plus Impranil® DLP is an anionic aliphatic polyester-polyurethane dispersion that has a density at 23°C of 1.1g/cm^3, a flow time at 23°C (4mm DIN cup) of 35 ± 15s, a pH value of 7 ± 1, and a non-volatile content (0.9-1.1g/1h/125°C) of 50 ± 2%. It is suitable for the formulation of textile coatings for use in numerous applications, such as technical articles, flocked articles, bags/luggage, and outerwear. This product has very good resistance to hydrolysis, good adhesion, a high solids content, is suitable for mechanical foaming, has good lighfastness and a soft handle. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic...voir plus Incorez STP is a Silane Terminated Polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This prepolymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight prepolymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Incorez STP | Incorez Ltd. | Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants...voir plus Incorez STP is an aliphatic silane terminated polyurethane that combines the properties of polyurethane with those of a silicone but without their respective drawbacks. This pre-polymer is primarily designed to act as a binder for moisture-curing sealants and elastic adhesives. It is a high molecular weight pre-polymer consisting of a polyurethane backbone and a tri-functional silane end group. voir moins | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. |
