| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| GENOCURE* BAPO | Rahn AG | GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...voir plus GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. voir moins | Request Sample |
| GENOCURE* BDK | Rahn AG | GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...voir plus GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* BDMM | Rahn AG | GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is...voir plus GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is typically used in concentrations from 0.5 to 4%. In printing inks it is often used in combination with thioxantones, aminobenzoates, benzophenones, GENOCURE* PMP, CPK and BDK. voir moins | Request Sample |
| GENOCURE* BMS | Rahn AG | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...voir plus GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. voir moins | Request Sample |
| GENOCURE* BP | Rahn AG | GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...voir plus GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. voir moins | Request Sample |
| GENOCURE* CPK | Rahn AG | GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. | Request Sample |
| GENOCURE* CQ | Rahn AG | GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...voir plus GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. voir moins | Request Sample |
| GENOCURE* DEAP | Rahn AG | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...voir plus GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. voir moins | Request Sample |
| GENOCURE* DETX | Rahn AG | GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...voir plus GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| GENOCURE* DMHA | Rahn AG | GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...voir plus GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . voir moins | Request Sample |
| GENOCURE* EHA | Rahn AG | GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This pr...voir plus GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product can be applied in offset inks and varnishes letterpress inks, screen inks and varnishes, flexo inks and varnishes and industrial coatings and adhesives. voir moins | Request Sample |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...voir plus GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. voir moins | Request Sample |
| GENOCURE* EPD | Rahn AG | GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is ...voir plus GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is typically used in offset inks, letterpress inks, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* ITX | Rahn AG | GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...voir plus GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| GENOCURE* LBC | Rahn AG | GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...voir plus GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. voir moins | Request Sample |
| GENOCURE* LBP | Rahn AG | GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...voir plus GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. voir moins | Request Sample |
| GENOCURE* LTD | Rahn AG | GENOCURE* LTD is a 1:1 blend of TPO/DMHA and has main features of liquid, excellent reactivity, solubility, and very good surface/through cure. This product has applications in non yellowing clear coats, white pigmented systems, and adhesives. | Request Sample |
| GENOCURE* LTM | Rahn AG | GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...voir plus GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. voir moins | Request Sample |
| GENOCURE* MBB | Rahn AG | GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...voir plus GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. voir moins | Request Sample |
| GENOCURE* MBF | Rahn AG | GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. | Request Sample |
| GENOCURE* MDEA | Rahn AG | GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...voir plus GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. voir moins | Request Sample |
| GENOCURE* PBZ | Rahn AG | GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...voir plus GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* PMP | Rahn AG | GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...voir plus GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. voir moins | Request Sample |
| GENOCURE* TPO | Rahn AG | GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...voir plus GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. voir moins | Request Sample |
| GENOCURE* TPO-L | Rahn AG | GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, f...voir plus GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes, letterpress inks and fillers. voir moins | Request Sample |
| GENOMER* 5271 | Rahn AG | GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...voir plus GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. voir moins | Request Sample |
| GENOPOL* AB-2 | Rahn AG | GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improve...voir plus GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxanthone and other photoinitiators. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. voir moins | Request Sample |
| GENOPOL* BP-2 | Rahn AG | GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the product...voir plus GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* BP-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* BP-2 will exhibit extremely low tendency to migrate. This product can be used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. voir moins | Request Sample |
| GENOPOL* TX-2 | Rahn AG | GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production ...voir plus GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* TX-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* TX-2 will exhibit extreme low tendency to migrate. This product is used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. GENOPOL*.TX-2 should always be used in combination with GENOPOL*.AB-2. voir moins | Request Sample |
| GENORAD* 16 | Rahn AG | GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ...voir plus GENORAD* 16 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). The product has good solubility in acrylates and methacrylates, and it maintains reactivity and viscosity. Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 16 has low or no effect on the reactivity of the system. It can be used in offset inks, letterpress inks, screen inks, flexo inks, inkjet and wood applications. voir moins | Request Sample |
| GENORAD* 18 | Rahn AG | GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the sy...voir plus GENORAD* 18 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 18 has low or no effect on the reactivity of the system. This product is typically used in offset inks and varnishes, letterpress inks, screen inks and varnishes, flexo inks and varnishes, paper and board varnishes and wood coatings. voir moins | Request Sample |
| GENORAD* 20 | Rahn AG | GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades...voir plus GENORAD* 20 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product stabilizes viscosity without reducing the cure speed, and its is recommended for clear coating and white and pastel shades. The product is very low in color. Specifically, it can be used in offset varnishes, screen varnishes, flexo varnishes, paper and board varnishes and wood coatings. voir moins | Request Sample |
| GENORAD* 21 | Rahn AG | GENORAD* 21 is an in-can stabilizer specially designed for use in UV-curable metallic inks. With its unique chemistry, GENORAD* 21 greatly widens the scope for in-can stabilization of UV metallic inks without effecting cure speed. Compared to hydroquinone...voir plus GENORAD* 21 is an in-can stabilizer specially designed for use in UV-curable metallic inks. With its unique chemistry, GENORAD* 21 greatly widens the scope for in-can stabilization of UV metallic inks without effecting cure speed. Compared to hydroquinone (HQ) and the hydroquinone mono methylether (HQME) GENORAD* 21 has low or no effect on the reactivity of the system. voir moins | Request Sample |
| GENORAD* 22 | Rahn AG | GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very l...voir plus GENORAD* 22 is a low viscosity polymerization inhibitor in acrylic monomer. It is an in-can stabilizer for radically curable inks, coatings and adhesives. Compared to hydroquinone (HQ) and hydroquinone monomethyl ether (HQME), GENORAD*.22 has no or very low effect on the reactivity of the system. This product is recommended for use in printing inks, inkjet inks, wood coatings and low viscosity systems. voir moins | Request Sample |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...voir plus GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. voir moins | Request Sample |
| GENORAD* 24 | Rahn AG | GENORAD* 24 is the latest complement to RAHN'S stabilizer product range. GENORAD* 24 is a unique all-purpose in-can stabilizer for UV LED and other (UV cured) free radical inks, coatings and adhesives. | Request Sample |
| GENORAD* 26 | Rahn AG | GENORAD* 26 is a polymerisation inhibitor in acrylic acid ester. It is a stabilizer for radically curable inks (UV/EB). This product can be used in offset inks, screen inks, flexo inks, and wood applications. | Request Sample |
| GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...voir plus GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. voir moins | Request Sample |
| GENORAD* 41 | Rahn AG | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...voir plus GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. voir moins | Request Sample |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Silanes | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins |
