| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...voir plus APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. voir moins | |
| Benzoin | Eutec Chemical Co., Ltd. | Benzoin is a light yellow crystalline powder with a 99% assay. It is used as an anti-cratering agent for powder coatings and an intermediate for organic synthesis. | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...voir plus BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. voir moins | |
| BYK®-306 | BYK 毕克 | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...voir plus BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. voir moins | |
| BYK®-313 | BYK 毕克 | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...voir plus BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. voir moins | |
| BYK®-333 | BYK 毕克 | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....voir plus BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. voir moins | |
| BYK®-354 | BYK 毕克 | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...voir plus BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. voir moins | |
| BYK®-3550 | BYK 毕克 | BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Dependi...voir plus BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Depending on the polarity of the system, BYK®-3550 shows different properties. In polar systems the additive shows an excellent compatibility in the coating, which leads to a homogeneous distribution in the film. voir moins | |
| BYK®-356 | BYK 毕克 | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-356 For Powder | BYK 毕克 | BYK®-356 For Powder anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is the solvent-free version of BYK-355. | |
| BYK®-358 N | BYK 毕克 | BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and doe...voir plus BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. This product is suited for high quality pigmented and non-pigmented industrial coatings. BYK®-358 N does not cause turbidity in clear coats or haze in pigmented systems. This additive is thermally stable. voir moins | |
| BYK®-359 | BYK 毕克 | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...voir plus BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. voir moins | |
| BYK®-359 For Powder | BYK 毕克 | BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This pr...voir plus BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent anti-cratering along with optimum leveling. Fisheyes and pinholes are prevented to produce the best DOI (distinction of image) in the powder coating film. BYK-359 ensures quick and easy incorporation into the binder due to its good compatibility and low product viscosity. voir moins | |
| BYK®-360 P | BYK 毕克 | BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additio...voir plus BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additionally, BYK-360 P prevents surface defects specific to powder coatings such as craters, pinholes and fisheyes. voir moins | |
| BYK®-361 N For Powder | BYK 毕克 | BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency wi...voir plus BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency with excellent leveling and outstanding performance in long termed exterior exposure conditions.Low viscosity facilitates the ease of incorporation of BYK-361 N. BYK-361 N is also suitable for pigmented systems. voir moins | |
| BYK®-364 P | BYK 毕克 | BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) an...voir plus BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) and reduce pinholes at the surface of the coating. BYK-364 P also improves leveling of powder coatings systems and prevents "orange peel“. Additionally, BYK-364 P prevents other surface defects specific to powder coating such as craters and fisheyes. BYK-364 P is an OH-functional additive which can be crosslinked with a suitable binder into the coating system. voir moins | |
| BYK®-366 P | BYK 毕克 | BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. ...voir plus BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-366 P very effectively prevents craters and improves leveling. Additionally pinholes, fisheyes and "orange-peel“ are reduced. voir moins | |
| BYK®-381 | BYK 毕克 | BYK®-381 is a leveling additive for aqueous systems. It is a solution of a polyacrylate, ionic. This product is an acrylic leveling additive which improves only leveling and has no effect on surface tension. | |
| Dynoadd® F-1 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...voir plus Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...voir plus Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...voir plus Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...voir plus Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...voir plus Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea 太尔化工 | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...voir plus Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...voir plus Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. voir moins | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...voir plus Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. voir moins | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...voir plus Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. voir moins | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...voir plus Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...voir plus Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. voir moins | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...voir plus Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. voir moins | Request Sample |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable fo...voir plus Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. voir moins | |
| EFKA® FL 3778 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...voir plus EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. voir moins | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...voir plus EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. voir moins | |
| Efka® SL 3886 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyuretha...voir plus Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyurethane systems such as wood finishes. voir moins | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...voir plus HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. voir moins | |
| Letch CFC®-100 | CHEONGWOO CFC CO., LTD. | Letch CFC®-100 is a high boiling hydrocarbon levelling additive for organic solvent systems. It improves levelling and gloss, prevents pinholes and cratering, has anti-floating and anti-flooding effects, and has good workability in print inks. It finds ap...voir plus Letch CFC®-100 is a high boiling hydrocarbon levelling additive for organic solvent systems. It improves levelling and gloss, prevents pinholes and cratering, has anti-floating and anti-flooding effects, and has good workability in print inks. It finds application in alkyd and acrylic melamine high temperature baking systems, in vinyl, acrylic, and NC lacquer coatings, in air drying chlorinated rubber systems, and in epoxy air drying systems. voir moins | |
| Letch CFC®-108 | CHEONGWOO CFC CO., LTD. | Letch CFC®-108 is a high boiling hydrocarbon and polysiloxane levelling additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, protects from orange peel in enamel baking systems, and improves...voir plus Letch CFC®-108 is a high boiling hydrocarbon and polysiloxane levelling additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, protects from orange peel in enamel baking systems, and improves brush marks in fast drying lacquer coatings. It finds application in alkyd and acrylic melamine high temperature baking systems, in polyurethane and epoxy air drying systems, in air drying chlorinated rubber systems, and in air drying lacquer systems. voir moins | |
| Letch CFC®-139 | CHEONGWOO CFC CO., LTD. | Letch CFC®-139 is a high molecular modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This light yellow, clear liquid improves gloss and surface leveling in acrylic baking systems, and has defoaming and anti-flo...voir plus Letch CFC®-139 is a high molecular modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This light yellow, clear liquid improves gloss and surface leveling in acrylic baking systems, and has defoaming and anti-flooding effects in various kinds of baking systems. It finds application in alkyd and acrylic melamine high temperature baking systems, in acrylic and acrylic urethane coatings, and in organic solvent coating systems. voir moins | |
| Letch CFC®-270 | CHEONGWOO CFC CO., LTD. | Letch CFC®-270 is a high molecular vinyl ether modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This clear liquid improves gloss and surface leveling, brush marks for organic solvent systems, and does not have ...voir plus Letch CFC®-270 is a high molecular vinyl ether modified acrylic ester copolymer leveling and defoaming additive for organic solvent systems. This clear liquid improves gloss and surface leveling, brush marks for organic solvent systems, and does not have any disturbance pick-up properties during roll coatings. It finds application in alkyd, acrylic, and polyester high temperature baking systems, in acrylic air drying and acrylic urethane low temperature baking systems, in solvent and solvent free based epoxy coatings, and in high polymer coil coatings. voir moins | |
| Letch CFC®-277 | CHEONGWOO CFC CO., LTD. | Letch CFC®-277 is a high molecular levelling and anti-cratering additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, improves substrate wetting, and has defoaming, deaerating, and anti-floo...voir plus Letch CFC®-277 is a high molecular levelling and anti-cratering additive for organic solvent systems. This clear liquid improves levelling and gloss, prevents pinholes and cratering, improves substrate wetting, and has defoaming, deaerating, and anti-flooding effects in various kinds of baking systems. It finds application in alkyd, acrylic, and polyester high temperature baking systems, in polyurethane coatings and air-dried alkyd systems, and in epoxy, polyester, and acrylic powder coatings. voir moins | |
| Letch CFC®-344W | CHEONGWOO CFC CO., LTD. | Letch CFC®-344W is a low molecular levelling additive for water soluble coatings. This clear liquid prevents bubbles and boiling marks in baking systems, improves levelling, gloss, and anti-flooding, and prevents cratering of surface films. It finds appli...voir plus Letch CFC®-344W is a low molecular levelling additive for water soluble coatings. This clear liquid prevents bubbles and boiling marks in baking systems, improves levelling, gloss, and anti-flooding, and prevents cratering of surface films. It finds application in general industrial, automotive, and wood coating systems. voir moins | |
| Letch CFC®-360W | CHEONGWOO CFC CO., LTD. | Letch CFC®-360W is a polyacrylate solution that improves levelling in water based systems. This clear liquid improves levelling and prevents pinholes, blocking for drying films, and cratering for surface films. It improves gloss and flow of coatings and f...voir plus Letch CFC®-360W is a polyacrylate solution that improves levelling in water based systems. This clear liquid improves levelling and prevents pinholes, blocking for drying films, and cratering for surface films. It improves gloss and flow of coatings and finds application in water soluble alkyd and acrylic baking systems, in automotive top and primer coatings, and in industrial coatings. voir moins | |
| NW-270 | Naewoi Korea Resins | NW-270 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular vinyl ether modified acrylic ester copolymer. It is used to improve gloss and limits disturbance during roll coating. NW-270 c...voir plus NW-270 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular vinyl ether modified acrylic ester copolymer. It is used to improve gloss and limits disturbance during roll coating. NW-270 can be used in alkyd, acrylic and polyester high temperature baking systems, acrylic air drying and acrylic urethane low temperature baking systems, solvent and solvent free based epoxy coatings, and high polymer coatings for coil coatings. voir moins | |
| NW-277 | Naewoi Korea Resins | NW-277 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss and improve substrate wetting. NW-277 can be used in alkyd, acry...voir plus NW-277 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss and improve substrate wetting. NW-277 can be used in alkyd, acrylic and polyester high temperature baking systems, polyurethane coatings and air-dried alkyd systems, and epoxy, polyester and acrylic powder coatings. voir moins | |
| SCHUTZENWET- 84 | SCHÜTZEN Chemical Group | SCHUTZENWET- 84 is a wetting and anti-crater agent used in paints and coatings industry. It can be specifically used for PTFE (Polytetrafluoroethylene) wetting. | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...voir plus SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. voir moins | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...voir plus SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. voir moins | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contain...voir plus SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contains a very compatible siloxane avoiding cratering, and in many coating systems it has a favourable influence on flow. SCHWEGO® foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives. voir moins | |
| TEGO® Glide 466 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings | Request Sample |
| TEGO® Twin 4200 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This prod...voir plus TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This product also offers enhanced reduction of surface tension and high compatibility. voir moins | Request Sample |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...voir plus WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. voir moins | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...voir plus WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. voir moins | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...voir plus WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. voir moins | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...voir plus WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. voir moins | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...voir plus WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. voir moins | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...voir plus WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. voir moins | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...voir plus WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). voir moins | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...voir plus WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. voir moins | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...voir plus WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. voir moins | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and e...voir plus WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. W´Add 902 is provided as a free flowing powder which is convenient in handling easy to disperse and reliable in performance. voir moins | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and elimi...voir plus WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. This product is provided as a granulate which is convenient in handling and easy to disperse. voir moins | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add...voir plus WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add 915 is a free flowing powder which is convenient in handling, easy to disperse and reliable in performance. voir moins | |
| XOANONS® WE-D557 | Anhui Xoanons Chemical Co., Ltd. 安徽嘉智信诺化工股份有限公司 | XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and...voir plus XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. voir moins | |
| YCK-1070 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1070 helps to eliminate craters, improve leveling, and prevent film floating. It is used in artificial leather processing for increasing surface gloss and providing assisting leveling action, and has applications for furniture, automotive and industri...voir plus YCK-1070 helps to eliminate craters, improve leveling, and prevent film floating. It is used in artificial leather processing for increasing surface gloss and providing assisting leveling action, and has applications for furniture, automotive and industrial coatings. YCK-1060 has a non-volatile matter of 100%, a density at 25℃ of 0.96 g/cm^3, a refractive index (25℃) of 1.401, and a flash point of 61℃. voir moins | |
| YCK-1140 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applicatio...voir plus YCK-1140 has a transparent liquid appearance, with solvent of diproplylene glycol monomethylether. It has a density at 25℃ of 0.99 g/cm^3, non-volatile matter of 52%, a flash point of 86℃, and a refractive index (25℃) of 1.442. This product has applications for automotive coatings, industrial coatings, furniture coatings, coil coatings, and printing inks. YCK-1140 helps improve flow and leveling, improve surface slip, scratch resistance and block resistance, and improve creditability to dust and spray. It offers quick substrate wetting, good crater resistance, leveling thicker coating on the vertical surface, has great compatibility and does not easily produce cloudiness. This product helps to reduce sensitivity of wood coating and furniture finish to air flow, prevent formation of Bernard cell, and improve the orientation of flatting agents. voir moins |
