| Bayhydrol® A 2601 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings...voir plus Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings. It can also be used in combination with suitable melamine resins for the formulation of one-component coatings. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1ml toluene / 1h / 125°C) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. This product can be used primarily in combination with Bayhydur® 304, XP 2487/1 and Desmodur® N 3900 for air- and oven-drying industrial coatings. The cured coating film is hard, tough but flexible and exhibits high gloss, good filling power, good weather and light stability, good resistance to solvents and gasoline and rapid drying. It is not recommended for clearcoat applications for wood. voir moins | |
| Acronal® PS 608 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 608 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is used to modify hydraulic binders especially mixtures containing cement. Compounds modified with this product have a very fluid consistency allowing the amount...voir plus Acronal® PS 608 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is used to modify hydraulic binders especially mixtures containing cement. Compounds modified with this product have a very fluid consistency allowing the amount of water to be strongly reduced without changing the properties of the final product. A significant increase in the flexural strength is observed. Acronal®PS 608 ap is recommended for the manufacture of repair mortar, industrial floor screeds, finescreeds, as well as cementitious self-leveling compounds. voir moins | |
| Acronal® Xpress 7512 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed ...voir plus Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed to allow for fast re-coats under highly humid climate conditions. BASF’s latest polymer for waterproofing makes use of multiple innovative surface features and a unique composition of ingredients, resulting in low water absorption, excellent blistering resistance, and a high pigment binder capability. voir moins | |
| PLEXTOL™ D 512 | Synthomer | PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acr...voir plus PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints. voir moins | |
| CYMEL® 380 | Allnex | CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne...voir plus CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. voir moins | Request Sample |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...voir plus Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. voir moins | |
| LIOCRYL AM 912 | Synthopol Chemie Germany | LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguish...voir plus LIOCRYL AM 912 is an aqueous pure acrylic emulsion that is solvent- and plasticizer-free. It is a general-purpose emulsion for the manufacture of matte to silk-finish emulsion paints and wood varnishes for interior and exterior coatings. It is distinguished by excellent adhesion to old alkyd resin coats exposed to moisture. The glossy paints are characterized by good stability, levelling, resistance to light and blocking resistance. voir moins | |
| PLEXTOL™ D 498 | Synthomer | PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure a...voir plus PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure acrylic recommended for saponification resistant exterior masonry coatings and renders. It is highly suitable for silicate coatings and renders and shows non-yellowing and excellent UV resistance. voir moins | |
| CYMEL® 370 | Allnex | CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne...voir plus CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. voir moins | Request Sample |
| Nebores® HPE 44-50 WPB | NECARBO B.V. | Nebores® HPE 44-50 WPB is a water-dilutable, hydroxy functional polyester resin. It provides high gloss and reactivity, good pigment wetting and universal adhesion properties, and good yellowing and weather resistance. This product finds application in in...voir plus Nebores® HPE 44-50 WPB is a water-dilutable, hydroxy functional polyester resin. It provides high gloss and reactivity, good pigment wetting and universal adhesion properties, and good yellowing and weather resistance. This product finds application in industrial stoving enamels, coil coatings, and 2-K PU topcoats. voir moins | |
| UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...voir plus UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. voir moins | Request Sample |
| UCECOAT® 7701 | Allnex | UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially p...voir plus UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. voir moins | Request Sample |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...voir plus Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. voir moins | |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...voir plus Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. voir moins | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...voir plus Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. voir moins | |
| AD-750AH | Chan Sieh Enterprises Co, Ltd. | AD-750AH is a styrene acrylic copolymer adhesive resin in the form of a yellowish, transparent emulsion. This product features excellent water-resistance and adhesive strength. It can be used as an adhesive binder for the lamination of polyurethane spon...voir plus AD-750AH is a styrene acrylic copolymer adhesive resin in the form of a yellowish, transparent emulsion. This product features excellent water-resistance and adhesive strength. It can be used as an adhesive binder for the lamination of polyurethane sponges and nylon cloth. voir moins | |
| AD-753 | Chan Sieh Enterprises Co, Ltd. | AD-753 is a styrene acrylic copolymer adhesive resin in the form of a yellowish, transparent emulsion. This product features excellent water resistance and adhesive strength. It can be used as an adhesive binder for lamination of polyurethane sponges an...voir plus AD-753 is a styrene acrylic copolymer adhesive resin in the form of a yellowish, transparent emulsion. This product features excellent water resistance and adhesive strength. It can be used as an adhesive binder for lamination of polyurethane sponges and nylon cloth. voir moins | |
| VINNAPAS® EAF 380 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for inter...voir plus VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for interiour and exteriour paints as well as for plasters and thermal insulation systems. Furthermore VINNAPAS® EAF 380 is a suitable binder for heavy duty interior gloss- and semigloss paints with a very low blocking tendency. It can be applied in coatings, emulsion paint, interior paints, silicate emulation paints and silicone resin emulsion paints. voir moins | |
| TM MC Powder Red 186C | New Prismatic Enterprise | TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an...voir plus TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Red 186C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Brown 497C | New Prismatic Enterprise | TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from brown to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Brown 497C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Vermilion 185C | New Prismatic Enterprise | TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from vermilion to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Vermilion 185C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Orange 021C | New Prismatic Enterprise | TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from orange to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Orange 021C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Yellow 387C | New Prismatic Enterprise | TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from yellow to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Yellow 387C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Green 335C | New Prismatic Enterprise | TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Green 335C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Blue 301U | New Prismatic Enterprise | TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with a...voir plus TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Blue 301U is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Violet 2728C | New Prismatic Enterprise | TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wit...voir plus TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from violet to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Violet 2728C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Black 5C2X | New Prismatic Enterprise | TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from black to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Black 5C2X is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| A-C 540 | DKSH | A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficien...voir plus A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand. voir moins | Request Sample |
| Luhydran® A 848 S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. Luhydran® A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane...voir plus Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. Luhydran® A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. Luhydran® A 848 S is recommended for applications such as: interior wood coatings for furniture or millwork applications; and general purpose and commercial interior coating applications. voir moins | |
| UCECOAT® 7156 | Allnex | UCECOAT® 7156 is an aliphatic urethane acrylate in 50% water, developed for wood coatings, but can also be used for other applications. UCECOAT® 7156 is radiation curable when formulated with an adapted photoinitiator system. It is characterized by a tack...voir plus UCECOAT® 7156 is an aliphatic urethane acrylate in 50% water, developed for wood coatings, but can also be used for other applications. UCECOAT® 7156 is radiation curable when formulated with an adapted photoinitiator system. It is characterized by a tacky coatings after water evaporation and before UV curing. This tacky material is re-emulsifiable and can be reused after filtration. voir moins | Request Sample |
| Laromer® WA 9057 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented p...voir plus Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented primers and topcoats for wooden furniture and plastics. This low- to medium-viscosity liquid can be applied by means of curtain coating and spraycoating in high speed coating equipment. Since Laromer® WA 9057 has good physical drying properties, it is suitable for 3D objects where shadow areas are insufficienlty cured. After physical drying, coatings based on Laromer® WA 9057 give tack free films in shadow areas after UV-curing films with good chemical resistance as well as good scratch resistance and low yellowing are obtained. voir moins | |
| VINNAPAS® EP 16 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EP 16 is a medium particle size, plasticizer-free, aqueous dispersion of a copolymer of vinyl acetate and ethylene. It forms films which have good resistance to alkali are remarkably flexible at low temperatures and are light-fast and non-ageing...voir plus VINNAPAS® EP 16 is a medium particle size, plasticizer-free, aqueous dispersion of a copolymer of vinyl acetate and ethylene. It forms films which have good resistance to alkali are remarkably flexible at low temperatures and are light-fast and non-ageing. VINNAPAS® EP 16 can be used as a binder for special emulsion paints and coatings, in particular for oil resistant paints, for crack bridging masonry paints and for knifing fillers. voir moins | |
| PLEXTOL™ R 5530 | Synthomer | PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates....voir plus PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates. PLEXTOL™ R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. PLEXTOL™ R 5530 is suitable also for multi-substrate primer formulations. voir moins | |
| WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with ...voir plus WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with excellent through drying and hardness even without the addition of a co-drier. W´Sol E 927 W also shows good compatibility with acrylic dispersions. voir moins | |
| Impranil® DLN W 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage....voir plus Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage. With a white low-viscosity dispersion in water and a solids content of approx. 50%, Impranil® DLN W 50 is suitable for the formulation of textile coatings for use in numerous applications. It has a high solids content, good lightfast, is suitable for mechanical foaming, and high flexibility. Impranil® DLN W 50 has a density at 23°C of 1.1g/cm^3, a pH value of 6.5 ± 1, a flow time at 23°C (4mm DIN cup) of ≤ 70s, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 50 ± 1%. voir moins | |
| Desmodur® LD | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® LD is a low-functionality isocyanate based on hexamethylene diisocyanate, used to improve the storage stability of pigmented moisture-curing one-pack polyurethane coatings with good lightfastness and weather stability. This product has a monomer...voir plus Desmodur® LD is a low-functionality isocyanate based on hexamethylene diisocyanate, used to improve the storage stability of pigmented moisture-curing one-pack polyurethane coatings with good lightfastness and weather stability. This product has a monomeric HDI of < 0.5%, a color value (hazen) of ≤ 50, a viscosity at 23°C of 75 ± 15 mPa·s, and an isocyanate content of 12.1 ± 0.4%. Beginning at 50 °C, Desmodur® LD reacts with water, releasing carbon dioxide and acting as a dewatering agent to ensure the storage stability of pigmented moisture-curing one-component polyurethane coatings. The stoichiometric conversion of 1 g water requires approx. 40 g Desmodur® LD. However, trials and actual use have shown that the best results are achieved using double to three times this quantity of Desmodur® LD. voir moins | |
| LIOCRYL AS 320 N | Synthopol Chemie Germany | LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries ...voir plus LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion. It is solvent- and plasticizer-free. The emulsion is particularly suitable for production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water and a high saponification resistance. Because of these properties Liocryl AS 320 is expecially suitable for the production of outdoor paints and plastics-bound plasters as well as for impregnating and priming brickwork and sanding plasters. voir moins | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...voir plus UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. voir moins | |
| EBECRYL® 244 | Allnex | EBECRYL® 244 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Ligh...voir plus EBECRYL® 244 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Light stable coatings, electrical insulation coatings, and coatings where a minimum of water absorption is desired (absorbs less than 1% water/24 hr. immersion). voir moins | Request Sample |
| EBECRYL® 246 | Allnex | EBECRYL® 246 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Ligh...voir plus EBECRYL® 246 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Light stable coatings, electrical insulation coatings, and coatings where a minimum of water absorption is desired (absorbs less than 1% water/24 hr. immersion). voir moins | Request Sample |
| UCECOAT® 7690 | Allnex | UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excel...voir plus UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excellent water release. Because of its non-irritant nature and low viscosity, it can be applied safely by spray, roller and curtain coating. voir moins | Request Sample |
| RESYDROL® SF 8011w/50WA | Allnex | RESYDROL® SF 8011W/50WA is an aqueous oil-modified multi-domain dispersion especially suitable as a sole binder for timber/ decking applications, wooden fences and sidings with excellent outdoor durability, in warm climate regions. (Temperatures cycles > ...voir plus RESYDROL® SF 8011W/50WA is an aqueous oil-modified multi-domain dispersion especially suitable as a sole binder for timber/ decking applications, wooden fences and sidings with excellent outdoor durability, in warm climate regions. (Temperatures cycles > 0 °C) Due to the harder backbone compared to Resydrol SF 8010W, it is recommended to blend Resydrol SF 8011W/50WA with a flexible, non-modified WB alkyd or oil components, to ensure sufficient flexibility at lower (< 0 °C) temperatures. voir moins | Request Sample |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...voir plus DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...voir plus DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...voir plus DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| TM MC Powder Rose Red 238C | New Prismatic Enterprise | TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from rose red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Rose Red 238C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Magenta Rubine Red C | New Prismatic Enterprise | TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature control...voir plus TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from magenta-rubine to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Magenta Rubine Red C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Charm Green C | New Prismatic Enterprise | TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from charm green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Charm Green C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Sky Blue 313C | New Prismatic Enterprise | TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from sky blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Sky Blue 313C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Turkish Blue 320C | New Prismatic Enterprise | TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controller...voir plus TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from turkish blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Turkish Blue 320C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Dark Blue 294C | New Prismatic Enterprise | TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from dark blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Dark Blue 294C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| AD-752S | Chan Sieh Enterprises Co, Ltd. | AD-752S is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane...voir plus AD-752S is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane sponges and nylon cloth. voir moins | |
| EBECRYL® 8706 | Allnex | EBECRYL® 8706 is an aliphatic urethane diacrylate oligomer diluted with 20% TMPTA. Films of EBECRYL® 8706 exhibits good metallization acceptation, water resistance, flexibility and low yellowing. EBECRYL® 8706 is designed to be used as the main oligomer i...voir plus EBECRYL® 8706 is an aliphatic urethane diacrylate oligomer diluted with 20% TMPTA. Films of EBECRYL® 8706 exhibits good metallization acceptation, water resistance, flexibility and low yellowing. EBECRYL® 8706 is designed to be used as the main oligomer in VM primer formulations requiring good leveling & plumpness, anti-haze and flexibility. voir moins | Request Sample |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...voir plus UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. voir moins | |
| CSV-3000 | PCI Group, Inc. | CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water tr...voir plus CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water transmission. The basic film properties are determined by the added emulsion. voir moins | |
| AD-752S-1 | Chan Sieh Enterprises Co, Ltd. | AD-752S-1 is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane...voir plus AD-752S-1 is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water resistance and adhesion strength, and is miscible with polyvinyl acetate emulsions. It can be used as an adhesive binder for lamination of polyurethane sponges and nylon cloth. voir moins | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...voir plus SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...voir plus SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. voir moins | |
| Acronal® PA 619 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 619 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is recommended for use in mortar patching or spraying applications. Admixture compositions formulated with this product show excellent open time at high temperat...voir plus Acronal® PA 619 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is recommended for use in mortar patching or spraying applications. Admixture compositions formulated with this product show excellent open time at high temperature with many types of cement, entraining low air, and it provides excellent freeze/thaw stability. Acronal® PA 619 ap is also recommended for use in cementitious ceramic tile thin-set adhesives and the modification of mortars and cement repair systems. Mortar compositions modified with this product exhibit better flexural, tensile strengths and show increased resistance to water permeability relative to unmodified mortar compositions. voir moins | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...voir plus EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. voir moins | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...voir plus LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. voir moins | |
| BR-641E | Bomar, formerly Dymax Oligomers & Coatings | BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to t...voir plus BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties. voir moins | |
| GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...voir plus SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. voir moins | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...voir plus SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. voir moins | |
| UCECOAT® 7850 | Allnex | UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity,...voir plus UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating. voir moins | Request Sample |
| A-C 540A | DKSH | A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coeffic...voir plus A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand. voir moins | Request Sample |
| UCECOAT® 6560 | Allnex | UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT 6560 and cured by ultraviole...voir plus UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex. voir moins | Request Sample |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV sili...voir plus SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. voir moins | |
| Styrofan® ECO 7623 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Styrofan® ECO 7623 is an aqueous polymer dispersion used to modify hydraulic binders. It offers low volatile organic compounds (VOC) solution for modifying hydraulic binders, especially cement mixtures. It is employed in products that have to meet the hig...voir plus Styrofan® ECO 7623 is an aqueous polymer dispersion used to modify hydraulic binders. It offers low volatile organic compounds (VOC) solution for modifying hydraulic binders, especially cement mixtures. It is employed in products that have to meet the highest standard of mechanical strengths, such as bonding agent, spatterdash, waterproofing mortar, concrete repair mortars, floor screeds, ceramic tile adhesive and so on. Trials must be performed in advance for each specific application, because the performance of Styrofan® ECO 7623 can be influenced by other additive and material involved. voir moins | |
| Desmophen® NH 1520 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a ...voir plus Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a flash point of approx. 74°C, and an amine value of 189-193mg KOH/g. voir moins | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...voir plus KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. voir moins | |
| LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...voir plus LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. voir moins | |
| Joncryl® 8383 (For Industrial Wood Coating Applications) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emul...voir plus Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383 shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation of a coating with a unique balance of chemical resistance, mechanical properties, and appearance. For outdoor purposes, Joncryl® 8383 shows very good wet adhesion. The crosslinking chemistry of Joncryl® 8383 allows drying at room and elevated temperatures. The good clarity, hardness development, and block resistance in combination with water resistance makes this product suitable for replacing some solvent-based coatings. Joncryl® 8383 is recommended for applications such as: interior/exterior wood coatings for millwork applications; interior/exterior concrete applications. voir moins | |
| GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| Epokukdo KEM-128-70 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good phys...voir plus Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. voir moins | |
| UCECOAT® 7177 | Allnex | UCECOAT® 7177 is an aliphatic urethane acrylate in 60% water developed for wood coatings, but can also be used for other applications. It is radiation curable when formulated with an adapted photoinitiator system. It is recommended for use in: wood primer...voir plus UCECOAT® 7177 is an aliphatic urethane acrylate in 60% water developed for wood coatings, but can also be used for other applications. It is radiation curable when formulated with an adapted photoinitiator system. It is recommended for use in: wood primer, clear and pigmented wood coatings, top coat for wood furniture and doors, and as binder in other industrial applications. voir moins | Request Sample |
| Laromer® UA 9059 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability ...voir plus Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability as a hydroprimer on different wood substrates. Excellent coin test results can be obtained if applied as hydroprimer on parquet. voir moins | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...voir plus BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. voir moins | |
| GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane...voir plus GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. voir moins | |
| CYMEL® 202 | Allnex | CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this product suitable for a wide range of medium to high solids or waterborne...voir plus CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this product suitable for a wide range of medium to high solids or waterborne baking applications like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. It has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. voir moins | Request Sample |
| Epoxies® 20-2621 | Epoxies, Etc. | Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environm...voir plus Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environmental protection. 20-2621 is semi-flexible and will not place excess stress on electronic components. It also has a low viscosity, which facilitates easy flow and penetration into difficult areas. voir moins | |
| BRC-4421 | Bomar, formerly Dymax Oligomers & Coatings | BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated ...voir plus BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture-sensitive or hydrophobic applications. voir moins | |
| BRC-841 | Bomar, formerly Dymax Oligomers & Coatings | BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The l...voir plus BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings. voir moins | |
| BRC-441D | Bomar, formerly Dymax Oligomers & Coatings | BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated i...voir plus BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications. voir moins | |
| Desmodur® VL 51 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane pr...voir plus Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane primers, and also as a component in the formulation of prepolymers. It is a brown liquid with a low viscosity at 25°C of 21.0 ± 5 mPa·s. This product has an acidity (HCI) of < 200mg/kg, an NCO of 32.5 ± 0.8%, and an equivalent weight of approx. 129. Compared with Desmodur® VL, Desmodur® VL 51 has a lower viscosity when mixed with Desmophen® 1145, 1150, 5028 GT and 1380 BT. The end-products are more flexible than combinations with Desmodur® VL. A water scavenger such as molecular sieve paste® 3 Å must be added to the polyol component to prevent any undesired reaction of Desmodur® VL 51 with water. Desmodur® VL 51 is used in the formulation of prepolymers for one- and two-component coatings and for related applications. It has the advantage of easier handling. voir moins | |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup)...voir plus Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| WorléeSol 07 A | Worlée-Chemie G.m.b.H. | WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neu...voir plus WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75%. Primers based on W´Sol 07 A show a very fast drying, excellent adhesion, long term elasticity and good corrosion resistance. voir moins | |
| Desmophen® C XP 2716 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very goo...voir plus Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a hydroxyl content of approx. 5.2%, an acid number of approx. 0.1mg KOH/g, and a water content of approx. 0.05%. voir moins | |
| LIOPTAL ES 43 | Synthopol Chemie Germany | LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used...voir plus LIOPTAL ES 43 is a short-oil alkyd resin supplied as 70% in butyl acetate. It can be used in combination with nitrocellulose for wood and metal finishes with rapid solvent evaporation and good resistance to water and alcohol. This product can also be used in combination with unplasticized urea or melamine resins for stove-drying industrial coatings; 1- and 2-component AC coatings; as the hydroxyl component in PUR coatings. voir moins | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...voir plus BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. voir moins | |
| Humocer® 100 A 45 TM EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM EX is a water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. It is based on water beyond the masses with base acrylic resins and PVA. | |
| Epoxies® 20-2028 | Epoxies, Etc. | Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safe...voir plus Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safer to use since it does not utilize MOCA or TDI. 20-2028 has been formulated for ease in handling with a convenient 1:1 mix ratio, low viscosity, and short demolding time. voir moins | |
| WorléePol® 191 | Worlée-Chemie G.m.b.H. | WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and ve...voir plus WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and very good flexibility. voir moins | |
| WorléeSol 65 A | Worlée-Chemie G.m.b.H. | WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinna...voir plus WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 65 A have a very good corrosion resistance. voir moins |
