| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation...voir plus DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation...voir plus DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation...voir plus DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation...voir plus DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| Bayhydrol® A 2601 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings...voir plus Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings. It can also be used in combination with suitable melamine resins for the formulation of one-component coatings. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1ml toluene / 1h / 125°C) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. This product can be used primarily in combination with Bayhydur® 304, XP 2487/1 and Desmodur® N 3900 for air- and oven-drying industrial coatings. The cured coating film is hard, tough but flexible and exhibits high gloss, good filling power, good weather and light stability, good resistance to solvents and gasoline and rapid drying. It is not recommended for clearcoat applications for wood. voir moins | |
| Impranil® DLN W 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage....voir plus Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage. With a white low-viscosity dispersion in water and a solids content of approx. 50%, Impranil® DLN W 50 is suitable for the formulation of textile coatings for use in numerous applications. It has a high solids content, good lightfast, is suitable for mechanical foaming, and high flexibility. Impranil® DLN W 50 has a density at 23°C of 1.1g/cm^3, a pH value of 6.5 ± 1, a flow time at 23°C (4mm DIN cup) of ≤ 70s, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 50 ± 1%. voir moins | |
| Acronal® Xpress 7512 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed ...voir plus Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed to allow for fast re-coats under highly humid climate conditions. BASF’s latest polymer for waterproofing makes use of multiple innovative surface features and a unique composition of ingredients, resulting in low water absorption, excellent blistering resistance, and a high pigment binder capability. voir moins | |
| WorléeDex 1177 | Worlée-Chemie G.m.b.H. | WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient ...voir plus WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient water resistance and resolubility during the printing process and after the stop of the roller. Due to its good compatibility with many resins and pigments W´Dex 1177 is also suitable as a combination partner for acrylic resins. W´Dex 1177 is especially environmental friendly because of its renewable raw materials and it is free of amines/ammonia and ethylene glycol. voir moins | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation...voir plus DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| TM MC Powder Red 186C | New Prismatic Enterprise | TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an...voir plus TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Red 186C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Brown 497C | New Prismatic Enterprise | TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from brown to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Brown 497C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Vermilion 185C | New Prismatic Enterprise | TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from vermilion to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Vermilion 185C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Orange 021C | New Prismatic Enterprise | TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from orange to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Orange 021C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Yellow 387C | New Prismatic Enterprise | TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from yellow to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Yellow 387C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Green 335C | New Prismatic Enterprise | TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Green 335C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Blue 301U | New Prismatic Enterprise | TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with a...voir plus TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Blue 301U is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Violet 2728C | New Prismatic Enterprise | TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wit...voir plus TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from violet to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Violet 2728C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Black 5C2X | New Prismatic Enterprise | TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from black to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Black 5C2X is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| Desmophen® NH 1520 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a ...voir plus Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a flash point of approx. 74°C, and an amine value of 189-193mg KOH/g. voir moins | |
| Laromer® WA 9057 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented p...voir plus Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented primers and topcoats for wooden furniture and plastics. This low- to medium-viscosity liquid can be applied by means of curtain coating and spraycoating in high speed coating equipment. Since Laromer® WA 9057 has good physical drying properties, it is suitable for 3D objects where shadow areas are insufficienlty cured. After physical drying, coatings based on Laromer® WA 9057 give tack free films in shadow areas after UV-curing films with good chemical resistance as well as good scratch resistance and low yellowing are obtained. voir moins | |
| TM MC Powder Rose Red 238C | New Prismatic Enterprise | TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from rose red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Rose Red 238C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Magenta Rubine Red C | New Prismatic Enterprise | TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature control...voir plus TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from magenta-rubine to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Magenta Rubine Red C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Charm Green C | New Prismatic Enterprise | TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from charm green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Charm Green C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Sky Blue 313C | New Prismatic Enterprise | TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from sky blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Sky Blue 313C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Turkish Blue 320C | New Prismatic Enterprise | TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controller...voir plus TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from turkish blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Turkish Blue 320C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Dark Blue 294C | New Prismatic Enterprise | TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from dark blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Dark Blue 294C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation...voir plus DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation...voir plus DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation...voir plus DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| Desmodur® VL 51 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane pr...voir plus Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane primers, and also as a component in the formulation of prepolymers. It is a brown liquid with a low viscosity at 25°C of 21.0 ± 5 mPa·s. This product has an acidity (HCI) of < 200mg/kg, an NCO of 32.5 ± 0.8%, and an equivalent weight of approx. 129. Compared with Desmodur® VL, Desmodur® VL 51 has a lower viscosity when mixed with Desmophen® 1145, 1150, 5028 GT and 1380 BT. The end-products are more flexible than combinations with Desmodur® VL. A water scavenger such as molecular sieve paste® 3 Å must be added to the polyol component to prevent any undesired reaction of Desmodur® VL 51 with water. Desmodur® VL 51 is used in the formulation of prepolymers for one- and two-component coatings and for related applications. It has the advantage of easier handling. voir moins | |
| Laromer® UA 9059 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability ...voir plus Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability as a hydroprimer on different wood substrates. Excellent coin test results can be obtained if applied as hydroprimer on parquet. voir moins | |
| LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...voir plus LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. voir moins | |
| Acclaim® Polyol 12200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for co...voir plus Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. This product can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Acclaim® Polyol 8200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 8200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 14.0 ± 1.5 and...voir plus Acclaim® Polyol 8200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 14.0 ± 1.5 and a viscosity at 25°C of 2,850 ± 850. Acclaim® Polyol 8200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water). voir moins | |
| Acclaim® Polyol 18200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and...voir plus Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and a viscosity at 25℃ of 23,000 + 4,000. Acclaim® Polyol 18200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water). voir moins | |
| Joncryl® 8383 (For Industrial Wood Coating Applications) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383 shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation...voir plus Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383 shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation of a coating with a unique balance of chemical resistance, mechanical properties, and appearance. For outdoor purposes, Joncryl® 8383 shows very good wet adhesion. The crosslinking chemistry of Joncryl® 8383 allows drying at room and elevated temperatures. The good clarity, hardness development, and block resistance in combination with water resistance makes this product suitable for replacing some solvent-based coatings. Joncryl® 8383 is recommended for applications such as: interior/exterior wood coatings for millwork applications; interior/exterior concrete applications. voir moins | |
| Acclaim® Polyol 4200 | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 a...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 and an acid humber of 0.004 - 0.020. Acclaim® Polyol 4200 is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Desmophen® 2060 BD | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1...voir plus Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1.7 ± 0.05 % by wt., and a viscosity at 25°C of 310 ± 25 mPa·s. Desmophen® 2060 BD is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation...voir plus Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Desmophen® 5035 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free...voir plus Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,600g, a hydroxyl number of 35.0 ± 2.0mg KOH/g, and a viscosity at 25°C of 860 ± 70 mPa·s. Desmophen® 5035 BT is suitable for combination with many Desmodur® products in the formulation of elastic coatings and adhesives. It is suitable as a raw material in the formulation of low-solvent reactive adhesives and coatings. Desmophen® 5035 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Bayhydrol® UH 650 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch ...voir plus Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch coatings. This product has an Efflux time at 23°C, (4mmcup) of 12-30, a non-volatile content (1g / 1h / 125°C) of 48-52, and a pH value of 6-8. When used in two-layer systems with two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 650 are characterized by good adhesion to many types of plastics, good overcoatability and good water resistance. The metallic basecoat can be oversprayed with a two-component polyurethane clearcoat after predrying e.g. for 5 min at an ambient temperature of 80°C or for 15 min at room temperature. voir moins | |
| Desmophen® 1380 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...voir plus Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity at 25°C of 600 ± 50 mPa·s. This product has an OH equivalent weight of approx. 146g, a hydroxyl number of 385 ± 15mg KOH/g, and an acid number of ≤ 0.5mg KOH/g. Desmophen® 1380 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1380 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Desmophen® 1400 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...voir plus Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity of 370 ± 40 mPa·s. This product has an acid number of max. 0.1mg KOH/g, an OH equivalent weight of approx. 140g, and a hydroxyl number of 400 ± 20mg KOH/g. Desmophen® 1400 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1400 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...voir plus Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. voir moins | |
| WorléePol® 194 | Worlée-Chemie G.m.b.H. | WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation...voir plus WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation of non-yellowing, high gloss top coats with good resistance to chemicals. voir moins | |
| Bayhydrol® A 2227/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with hi...voir plus Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41-43, a viscosity at 23°C, (D = approx. 40 s-1) of 700 - 2,500, an acid value of 7-10, and a pH (1:3 in demineralised water) of 7,5 - 8,5. Bayhydrol® A 2227/1 is characterised by its good pigment wetting properties and high shear stability. Bead and sand mills have proved suitable as grinding equipment. Grinding temperatures of up to approx. 50°C have no detrimental effect on quality of the coating. Given the many different pigments available, the storage stability should always be tested. The rutile titanium dioxide pigments of the Tronox range, especially Tronox® R-KB-4, are particularly suitable. voir moins | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation...voir plus Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. voir moins | |
| Araldite® GT 7097 | Jubail Chemical Industries Co. | Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation...voir plus Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation of metal decorating finishes, can and coil coatings, primers and enamels, metal furniture finishes, and primers. voir moins | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation...voir plus Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. voir moins | |
| Razeen® SL 4171 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation...voir plus Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| Razeen® SL 4072 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation...voir plus Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne...voir plus UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. voir moins | Request Sample |
| Bayhydur® XP 2655 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reli...voir plus Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. Despite its relatively low hydrophilia, this hardener can be easily dispersed in the aqueous phase, even at low shear forces such as are typically found in trade applications. Coatings formulated with the product yield films with high gloss and very low haze. The increase in viscosity during mixing that is typical for hydrophilized hardeners, in particular with ionically hydrophilized polyol dispersions, can be controlled by prethinning with water or slight amounts of organic cosolvent. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improv...voir plus Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion. This product has a viscosity at 23°C of 1,000 ± 300 mPa·s, a color value (Iod) of ≤ 4, and a flash point of approximately 41°C. voir moins | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation...voir plus Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 502 ap is ideal for zero-low VOC and odorless paints. Its high pigment binding capacity makes it suitable for use in emulsion paints, smoothing fillers and textured finishes. Due to its high alkali resistance and compatibility with common potassium water glasses, Acronal® ECO 502 ap can also be utilized in silicate-based finishes. voir moins | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...voir plus Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. voir moins | |
| Chlorinated Rubber-YURON CR 10 | Yuron New Material 裕隆新材料 | Chlorinated Rubber-YURON CR 10 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 8-13 mpa.s at 25°C. | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...voir plus K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. voir moins | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...voir plus K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. voir moins | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...voir plus Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. voir moins | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...voir plus K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. voir moins |
