| ADDITOL® P 965 | Allnex | ADDITOL® P 965 is an aromatic urethane adduct crosslinking agent for hydroxylated polyester resins for the manufacture of polyurethane powder coatings. | Request Sample |
| ADDITOL® VXW 6252 | Allnex | ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders. | Request Sample |
| ADDITOL® VXW 6385 | Allnex | ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin ...voir plus ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin catalysis. voir moins | Request Sample |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...voir plus Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. voir moins | Request Sample |
| Basic Chromic Chloride Powder | McGean-Rohco, Inc. | Basic Chromic Chloride Powder is a green powder. It is used as an intermediate in the manufacture of chromium compounds, vapor, chromium plating, and waterproofing compounds. It is also used as a mordant in textile dyeing and as a cross linking agent. | |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup)...voir plus Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Bayhydur® XP 2547 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily di...voir plus Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily dispersed in the aqueous phase. It is used primarily as the crosslinking agent for waterborne polyol binders (Bayhydrol®). The dispersibility of the product in water is influenced by organic cosolvents. voir moins | |
| Chicure® 800 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalkin...voir plus Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalking resistance as well as excellent gloss retention, fewer color deviation and supreme chalking resistance after a long-term exposure. voir moins | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesio...voir plus CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. voir moins | Request Sample |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for gene...voir plus CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. voir moins | Request Sample |
| CYMEL® 1133 | Allnex | CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film...voir plus CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties. voir moins | Request Sample |
| CYMEL® 1141 | Allnex | CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This produ...voir plus CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors. voir moins | Request Sample |
| CYMEL® 1156 | Allnex | CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...voir plus CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. voir moins | Request Sample |
| CYMEL® 1158 | Allnex | CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast...voir plus CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast cure response, low blistering tendency and low formaldehyde release during cure. voir moins | Request Sample |
| CYMEL® 1161 | Allnex | CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibili...voir plus CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings. voir moins | Request Sample |
| CYMEL® 1168 | Allnex | CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good comb...voir plus CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good combination of mechanical and chemical resistance properties. voir moins | Request Sample |
| CYMEL® 1172 | Allnex | CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excel...voir plus CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excellent reactivity. It cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response. voir moins | Request Sample |
| CYMEL® 202 | Allnex | CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this produ...voir plus CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this product suitable for a wide range of medium to high solids or waterborne baking applications like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. It has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. voir moins | Request Sample |
| CYMEL® 203 | Allnex | CYMEL® 203 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to CYMEL® 202 which provides for better flow and leveling while maintai...voir plus CYMEL® 203 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to CYMEL® 202 which provides for better flow and leveling while maintaining fast cure and hydrophobicity. This product is highly reactive and has a high tendency towards self-condensation reactions at rather low baking temperatures providing films with very good hardness, gloss, chemical resistance, and outdoor durability. voir moins | Request Sample |
| CYMEL® 211 | Allnex | CYMEL® 211 Resin is a high imino, mix- alkylated melamine formaldehyde resin designed specifically for high solids system. Its most significant advantage over the other high imino melamine resins in our product line is its superior water and corrosion res...voir plus CYMEL® 211 Resin is a high imino, mix- alkylated melamine formaldehyde resin designed specifically for high solids system. Its most significant advantage over the other high imino melamine resins in our product line is its superior water and corrosion resistance properties. voir moins | Request Sample |
| CYMEL® 232 | Allnex | CYMEL® 232 Resin is a highly alkylated methoxy butoxy melamine-formaldehyde resin. Its high degree of alkylation and high monomer content makes it especially recommended for low VOC systems, those applications requiring high film flexibility, and those sy...voir plus CYMEL® 232 Resin is a highly alkylated methoxy butoxy melamine-formaldehyde resin. Its high degree of alkylation and high monomer content makes it especially recommended for low VOC systems, those applications requiring high film flexibility, and those systems where recoat adhesion must be optimized. voir moins | Request Sample |
| CYMEL® 235 | Allnex | CYMEL® 235 Resin is a highly alkylated methoxymethyl butoxymethyl melamine-formaldehyde resin. For electrodeposition coatings, both glossy finish and matt finish film can be achieved. CYMEL® 235 Resin is especially recommended for general metal finishes p...voir plus CYMEL® 235 Resin is a highly alkylated methoxymethyl butoxymethyl melamine-formaldehyde resin. For electrodeposition coatings, both glossy finish and matt finish film can be achieved. CYMEL® 235 Resin is especially recommended for general metal finishes providing flexibility. voir moins | Request Sample |
| CYMEL® 243-3 Resin | Allnex | CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating sys...voir plus CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes. voir moins | Request Sample |
| CYMEL® 247-10 | Allnex | CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable...voir plus CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss. voir moins | Request Sample |
| CYMEL® 250 | Allnex | CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. ...voir plus CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin. voir moins | Request Sample |
| CYMEL® 251 | Allnex | CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on...voir plus CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers. voir moins | Request Sample |
| CYMEL® 254 | Allnex | CYMEL® 254 resin is a methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for high solids system and does not require a strong acid catalyst for fast cure response. Its most significant advantage o...voir plus CYMEL® 254 resin is a methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for high solids system and does not require a strong acid catalyst for fast cure response. Its most significant advantage over the other high imino melamine resin in our product line is its superior stain, water and corrosion resistance properties. voir moins | Request Sample |
| CYMEL® 285-100 | Allnex | CYMEL® 285-100 Resin is a highly alkylated methoxy butoxy melamineformaldehyde resin. Its high degree of alkylation and high monomer content, it is especially recommended for low VOC systems, those applications requiring high film flexibility, and those s...voir plus CYMEL® 285-100 Resin is a highly alkylated methoxy butoxy melamineformaldehyde resin. Its high degree of alkylation and high monomer content, it is especially recommended for low VOC systems, those applications requiring high film flexibility, and those systems where recoat adhesion must be optimized. voir moins | Request Sample |
| CYMEL® 300 | Allnex | CYMEL 300 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL 300 resin an excellent cr...voir plus CYMEL 300 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings. voir moins | Request Sample |
| CYMEL® 3020 | Allnex | CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is inso...voir plus CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. voir moins | Request Sample |
| CYMEL® 303 LF | Allnex | CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications ...voir plus CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations. voir moins | Request Sample |
| CYMEL® 304 | Allnex | CYMEL® 304 resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with this product exhibits excellent catalyzed stability and films develop excellent earl...voir plus CYMEL® 304 resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with this product exhibits excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas. voir moins | Request Sample |
| CYMEL® 308 | Allnex | CYMEL® 308 resin is a highly methylated melamine crosslinker supplied as a liquid at >98% solids. Relative to CYMEL 303 LF resin, CYMEL® 308 resin is higher in molecular weight providing better substrate wetting, lower fuming tendency in high bake conditi...voir plus CYMEL® 308 resin is a highly methylated melamine crosslinker supplied as a liquid at >98% solids. Relative to CYMEL 303 LF resin, CYMEL® 308 resin is higher in molecular weight providing better substrate wetting, lower fuming tendency in high bake conditions, and fast network development. CYMEL® 308 resin is a highly effective crosslinking agent for a broad range of applications such as coil, can, container, automotive and general industrial coatings. voir moins | Request Sample |
| CYMEL® 323 | Allnex | CYMEL 323 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. The exceptional high reactivity combined with very good hardness, appearance, and low formaldehyde release during cure makes CYMEL 323 resin suitable for low bake sol...voir plus CYMEL 323 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. The exceptional high reactivity combined with very good hardness, appearance, and low formaldehyde release during cure makes CYMEL 323 resin suitable for low bake solvent-borne and water-borne formulations. voir moins | Request Sample |
| CYMEL® 325 | Allnex | CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. I...voir plus CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings. voir moins | Request Sample |
| CYMEL® 327 | Allnex | CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance a...voir plus CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOCs in high solids formulations. voir moins | Request Sample |
| CYMEL® 328 | Allnex | CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such a...voir plus CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications. voir moins | Request Sample |
| CYMEL® 350 | Allnex | CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion system...voir plus CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling characteristics and less solvent popping on cure. voir moins | Request Sample |
| CYMEL® 370 | Allnex | CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resista...voir plus CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. voir moins | Request Sample |
| CYMEL® 370N | Allnex | CYMEL® 370N Resin is a methylated melamine-formaldehyde crosslinking agent with a medium degree of alkylation, a high methylol content and low imino functionality. CYMEL® 370N resin is partially water soluble and has an excellent compatibility with water ...voir plus CYMEL® 370N Resin is a methylated melamine-formaldehyde crosslinking agent with a medium degree of alkylation, a high methylol content and low imino functionality. CYMEL® 370N resin is partially water soluble and has an excellent compatibility with water soluble backbone polymers. The carboxyl functionality of anionic backbone polymers is sufficiently acidic to catalyse the reaction at relatively low temperature curing schedules. This makes CYMEL® 370 resin suitable for a wide range of water borne industrial stoving finishes. voir moins | Request Sample |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| CYMEL® 3745 | Allnex | CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films ...voir plus CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations. voir moins | Request Sample |
| CYMEL® 380 | Allnex | CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resista...voir plus CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. voir moins | Request Sample |
| CYMEL® 385 | Allnex | CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide...voir plus CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers. voir moins | Request Sample |
| CYMEL® 5010 | Allnex | CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to t...voir plus CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. voir moins | Request Sample |
| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the ...voir plus CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. voir moins | Request Sample |
| CYMEL® MB-94 Resin | Allnex | CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance ...voir plus CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance and cold check properties while maintaining fast drying properties. voir moins | Request Sample |
| CYMEL® MI-12-I | Allnex | CYMEL MI-12-I resin is a partially iso-butylated melamine supplied in isobutanol. Its high reactivity, combined with very good leveling properties, makes CYMEL MI-12-I resin suitable for fast drying industrial applications like mirror backing, primers, an...voir plus CYMEL MI-12-I resin is a partially iso-butylated melamine supplied in isobutanol. Its high reactivity, combined with very good leveling properties, makes CYMEL MI-12-I resin suitable for fast drying industrial applications like mirror backing, primers, and dipping enamels. voir moins | Request Sample |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films th...voir plus CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. voir moins | Request Sample |
| CYMEL® NF 3030 | Allnex | CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA am...voir plus CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility. voir moins | Request Sample |
| CYMEL® NF 3041 | Allnex | CYMEL® NF-3041 resin is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing this product e...voir plus CYMEL® NF-3041 resin is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing this product exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility. voir moins | Request Sample |
| CYMEL® U-1050-10 Resin | Allnex | CYMEL® U-1050-10 resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050 resin. CYMEL® U-1050-10 resin has wide compatibility with other film formers and is useful in fast curing industrial baki...voir plus CYMEL® U-1050-10 resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050 resin. CYMEL® U-1050-10 resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood. voir moins | Request Sample |
| CYMEL® U-1052-8 | Allnex | CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to goo...voir plus CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to good adhesion and pasteurization resistance. voir moins | Request Sample |
| CYMEL® U-1054 | Allnex | CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance propertie...voir plus CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles. voir moins | Request Sample |
| CYMEL® U-227-8 | Allnex | CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal prim...voir plus CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. voir moins | Request Sample |
| CYMEL® U-65 | Allnex | CYMEL® U-65 resin is a high solids, methylated urea resin designed for use in both water and solvent-borne systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality. | Request Sample |
| CYMEL® U-662 | Allnex | CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for ac...voir plus CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission is required. voir moins | Request Sample |
| CYMEL® U-663 | Allnex | CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity...voir plus CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission and high film gloss is required. voir moins | Request Sample |
| CYMEL® U-80 | Allnex | CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating...voir plus CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates. voir moins | Request Sample |
| CYMEL® UB-30-B | Allnex | CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV re...voir plus CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV resistance properties of urea resins, this product is not suitable for exterior applications. voir moins | Request Sample |
| CYMEL® UI-19-I | Allnex | CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes this product suitable for ambient and low bake industrial wood finishes. | Request Sample |
| CYMEL® UI-19-IE | Allnex | CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coa...voir plus CYMEL UI-19-IE resin is a partially iso-butylated urea crosslinker supplied in isobutanol and ethanol. The very fast drying properties combined with very good stackability properties makes CYMEL UI-19-IE resin suitable for fast drying acid curing wood coating applications where low odor formulations are required. voir moins | Request Sample |
| CYMEL® UI-21-E Resin | Allnex | CYMEL® UI-21-E resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E resin is not suitable for exterior applications. | Request Sample |
| CYMEL® UI-27-EI | Allnex | CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is no...voir plus CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications. voir moins | Request Sample |
| CYMEL® UI-38-I Resin | Allnex | CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea res...voir plus CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications. voir moins | Request Sample |
| CYMEL® XW 3106 | Allnex | CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate hi...voir plus CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility. voir moins | Request Sample |
| Desmodur® CD-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because...voir plus Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because the composition of the product is consistent with guideline EC 2002/72 and conforms to FDA 175 105. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, and a hydrolysable chlorine content of maximum 50mg/kg. voir moins | |
| Desmodur® CD-S | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and ...voir plus Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and of low viscosity at room temperature and crystallizes at lower temperatures. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, a hydrolysable chlorine content of maximum 50mg/kg, and a density (20°C) of 1.21kg/l. voir moins | |
| Desmodur® DA-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused b...voir plus Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids. These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as a crosslinking agent for largely pH-neutral aqueous polymer dispersions, such as polyurethane, polyvinylacetate, polyacrylate and synthetic rubber dispersions. Crosslinking raises the resistance of the bonds to heat, water, plasticizers and numerous solvents. This product has an NCO content of 20.0 ± 1%, a viscosity at 23°C of 3,000 ± 600 mPa·s, and a monomeric HDI of ≤ 0.25%. voir moins | |
| Desmodur® DN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These h...voir plus Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking increases the resistance of the bonds to heat, water, plasticisers and many solvents. Compared with Desmodur® DA, Desmodur® DN is characterised by its much lower viscosity and is not prone to turbidity at low storage temperatures. This product has an NCO content of 21.8 ± 0.5%, a viscosity at 23°C (rotation) of 1,250 ± 300 mPa·s, and an HDI monomer content of ≤ 0.25%. voir moins | |
| Desmodur® PC-N | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity a...voir plus Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity at temperatures above 15°C that crystallizes at lower temperatures. It has an NCO content of 26.0 ± 1.0%, a vapor pressure at 20°C (MDI) of < 10^-5 hPa, and a density 25°C of 1.22g/cm^3. Desmodur® PC-N can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® PC-N is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Desmodur® RE | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RE is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate. It is a crosslinker for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials. It is a ellow-green or red-brown to dark vio...voir plus Desmodur® RE is a solution of triphenylmethane-4,4,4-triisocyanate in ethyl acetate. It is a crosslinker for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials. It is a ellow-green or red-brown to dark violet liquid, but the colour does not influence the quality of the bonds. The product may contain flaky deposits. This product has an NCO content of 9.3 ± 0.2%, a non-volatile content of approx. 27%, and a density at 20°C approx. 1.0g/cm^3. After adding Desmodur® RE, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes in-creasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® RFE | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RFE is a solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate. It is a crosslinker with universal suitability for adhesives based on Desmocoll, natural or synthetic rubber with special adhesion on rubber materials. This product ha...voir plus Desmodur® RFE is a solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate. It is a crosslinker with universal suitability for adhesives based on Desmocoll, natural or synthetic rubber with special adhesion on rubber materials. This product has an NCO content of 7.2 ± 0.2%, a non-volatile content of approx. 27%, and a density at 20°C of approx. 1.0g/cm^3. After adding of Desmodur® RFE, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes increasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® RN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® RN is a solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. It is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-colored adhesives used to bond rubber mat...voir plus Desmodur® RN is a solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. It is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-colored adhesives used to bond rubber materials. . The use of suitable adhesives yields bonds which undergo minimal discoloration on exposure to light. This product has an NCO content of 7.2 ± 0.3%, a non-volatile content of approx. 40%, and a density at 20°C of approx. 1.04g/cm^3. After adding of Desmodur® RN, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes increasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. voir moins | |
| Desmodur® VK 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. Thi...voir plus Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, that may partially crystallise at lower temperatures. It has an NCO content of 31.5 ± 1.0%, a viscosity 25°C 90 ± 20 mPa·s, a pot life of 12 - 16 min., and a vapor pressure at 20°C (MDI) < 10^-5 hPa. Desmodur® VK 10 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 10 is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Desmodur® VK 10 L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VK 10 L is a mixture of diphenylmethane-4,4-diisocyanate with isomers and higher functional homologues. It is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscos...voir plus Desmodur® VK 10 L is a mixture of diphenylmethane-4,4-diisocyanate with isomers and higher functional homologues. It is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, which may partially crystallize at lower temperatures. Desmodur® VK 10 L has an phenyl isocyanate content of max. 50mg/kg, a pot life of 17 - 20 min., and a vapor pressure at 20°C (MDI) of < 10^-5 hPa. Desmodur® VK 10 L can be combined with Baycoll® in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 10 L is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. voir moins | |
| Desmodur® VKS 20 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VKS 20 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It ...voir plus Desmodur® VKS 20 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C that may partially crystallize at lower temperatures. This product has a vapor pressure at 20°C (MDI) of < 10^-5 hPa, an phenyl isocyanate content of max. 50mg/kg, and a viscosity (25°C) of 200 ± 40 mPa·s, and an NCO content of 31.5 ± 1.0%. Desmodur® VKS 20 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. It is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapor pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins | |
| Domopur 0215 35 Wa | HELIOS RESINS | Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scr...voir plus Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scratch resistance. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...voir plus Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. voir moins | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...voir plus EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. voir moins | |
| MACRYNAL® SM 2516/70BAC | Allnex | MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent ...voir plus MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes. voir moins | Request Sample |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| MYCOAT® 779 | Allnex | MYCOAT® 779 resin is a new type of methoxy methyl melamineformaldehyde resin with a high imino group and high monomeric content, which does not require strong acid catalyst for fast cure response. MYCOAT 779 resin can expect sharply curing in comparison w...voir plus MYCOAT® 779 resin is a new type of methoxy methyl melamineformaldehyde resin with a high imino group and high monomeric content, which does not require strong acid catalyst for fast cure response. MYCOAT 779 resin can expect sharply curing in comparison with others same type. MYCOAT 779 resin can also be used in the preparation of a wide range of general industrial finishes. voir moins | Request Sample |
| P-Phenylenediamine (PPD) | Hainan Zhongxin Chemical Co., Ltd. | P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be u...voir plus P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be used in the production of hair dyes, rubber chemicals, textile dyes, pigments, and photographic developing chemicals. voir moins | |
| PHENODUR® EP 560 | Allnex | PHENODUR® EP 560 is used as a crosslinker for epoxy, hydroxyl, carboxyl and amide functional vehicles to produce baked films with excellent chemical resistance, corrosion protection and adhesion. | Request Sample |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...voir plus PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. voir moins | Request Sample |
| PHENODUR® PR 787/50MP | Allnex | PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or...voir plus PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or exterior can coatings and metal drum linings. voir moins | Request Sample |
| PHENODUR® PR 825/70MPAC | Allnex | PHENODUR® PR 825 is a Bisphenol A-free, heat curing, non-plasticized phenolic resin. Very light color, excellent flexibility and good sulphur resistance, medium reactivity, for BADGE- and BPA-NI usage, “coil for can” cycle and foils. | Request Sample |
| PHENODUR® PR 898/52BGB | Allnex | PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant...voir plus PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant protective coatings for apparatus, vessels and pipelines. Excellent flexibility and retort resistance; low reactivity. The cured film is slighty golden in color. Catalyst CYCAT XK 406 N is necessary. voir moins | Request Sample |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...voir plus Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. voir moins | |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...voir plus Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. voir moins | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...voir plus Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. voir moins | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...voir plus Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. voir moins | |
| PLEXTOL™ R 825 N | Synthomer | Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic...voir plus Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trim paints. It offers high gloss potential, excellent wet adhesion and good blocking resistance. voir moins | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...voir plus Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. voir moins | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. |
