| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AQUACER® 539 | BYK 毕克 | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...voir plus AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. voir moins | |
| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...voir plus AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. voir moins | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| Aspanger Mica 900 | Aspanger | Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves ma...voir plus Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica 900 has a loose bulk density (g/l) of 350. voir moins | |
| Aspanger Mica F | Aspanger | Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F impro...voir plus Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica F has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 34, and a loose bulk density (g/l) of 440. voir moins | |
| Aspanger Mica G | Aspanger | Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G impro...voir plus Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica G has a spec. surface (m²/g) of 8, an a oil absorption (g/100 g) of 28, and a loose bulk density (g/l) of 490. voir moins | |
| Aspanger Mica N | Aspanger | Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N impro...voir plus Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica N has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 31, and a loose bulk density (g/l) of 460. voir moins | |
| Aspanger Mica SFG20 | Aspanger | Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG2...voir plus Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG20 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG20 has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 41, and a loose bulk density (g/l) of 370. voir moins | |
| Aspanger Mica SFG40 | Aspanger | Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...voir plus Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG40 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG40 has a spec. surface (m²/g) of 17, an a oil absorption (g/100 g) of 42, and a loose bulk density (g/l) of 290. voir moins | |
| Aspanger Mica SFG70 | Aspanger | Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...voir plus Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG70 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG70 has a spec. surface (m²/g) of 21, an a oil absorption (g/100 g) of 43, and a loose bulk density (g/l) of 200. voir moins | |
| Aspanger Mica SG | Aspanger | Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG imp...voir plus Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SG has a spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 25, and a loose bulk density (g/l) of 500. voir moins | |
| Aspanger Mica TF | Aspanger | Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves mate...voir plus Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TF has a Spec. surface (m²/g) of 9.5, an a oil absorption (g/100 g) of 52, and a loose bulk density (g/l) of 370. voir moins | |
| Aspanger Mica TG | Aspanger | Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves mate...voir plus Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TG has a spec. surface (m²/g) of 4.0, an a oil absorption (g/100 g) of 46, and a loose bulk density (g/l) of 350. voir moins | |
| Aspanger Mica TM | Aspanger | Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves mate...voir plus Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TM has a spec. surface (m²/g) of 5.5, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 360. voir moins | |
| Aspanger Mica TX | Aspanger | Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves mate...voir plus Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TX has a spec. surface (m²/g) of 1.2 and a loose bulk density (g/l) of 320. voir moins | |
| Aspanger Mica TXL | Aspanger | Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves ma...voir plus Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TXL has a spec. surface (m²/g) of 3.3 and a loose bulk density (g/l) of 330. voir moins | |
| AW-858 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AW-858, in the form of a liquid, 8 is a high molecular weight water based silicon feel modifier for leather. It is used in leather topcoats to enhance surface feel properties and improve abrasion resistance properties. | |
| BYK-UV 3518 | BYK 毕克 | BYK-UV 3518 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| BYK-UV 3519 | BYK 毕克 | BYK-UV 3519 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CERAFLOUR® 917 | BYK 毕克 | CERAFLOUR® 917 is a temperature stable wax additive with excellent shear stability for solvent-borne and aqueous coating systems. This additive makes it possible to achieve homogeneous and even surface textures. It is characterized by a high shear stabil...voir plus CERAFLOUR® 917 is a temperature stable wax additive with excellent shear stability for solvent-borne and aqueous coating systems. This additive makes it possible to achieve homogeneous and even surface textures. It is characterized by a high shear stability and is also suitable for roller applications, which reach very high shear forces during application. As a result of the high melt viscosity of the wax, the wax particles do not change shape, even at high baking temperatures. In spray coatings, a soft touch effect can be achieved. The wax increases the scratch and abrasion resistance of coatings. voir moins | |
| CERAFLOUR® 999 | BYK 毕克 | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...voir plus CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. voir moins | |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...voir plus CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. voir moins | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 40 | Arkema Rheology & Specialty Additives | Coadis™ BR 40 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...voir plus CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. voir moins | Request Sample |
| CRAYVALLAC® WN-1442 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1442 is an additive for use in liquid coatings to enhance surface properties such as scratch and abrasion resistance. Its fine particle size distribution is providing enhanced performance and ease of incorporation | Request Sample |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...voir plus CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. voir moins | Request Sample |
| CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...voir plus CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. voir moins | Request Sample |
| CRAYVALLAC® WN-2950 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...voir plus CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. voir moins | Request Sample |
| CRAYVALLAC® WN-3025 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...voir plus CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. voir moins | Request Sample |
| CRAYVALLAC® WS-4700 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provide...voir plus CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. voir moins | Request Sample |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...voir plus CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. voir moins | Request Sample |
| CRAYVALLAC® WW-9500 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provid...voir plus CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. It also retards the settlement of pigments and assists in their redispersion. voir moins | Request Sample |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, incr...voir plus Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. voir moins | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based sc...voir plus Dow Corning® 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. voir moins | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effec...voir plus Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | |
| EBECRYL® 14 | Allnex | EBECRYL® 14 is a trifunctional-high molecular weight diluting oligomer which polymerizes when exposed to sources of free radicals. EBECRYL® 14 is water dispersable and provides high flexibility, chemical and abrasion resistance. EBECRYL® 14 is used in ele...voir plus EBECRYL® 14 is a trifunctional-high molecular weight diluting oligomer which polymerizes when exposed to sources of free radicals. EBECRYL® 14 is water dispersable and provides high flexibility, chemical and abrasion resistance. EBECRYL® 14 is used in electronics, coatings and inks. It is free from labeling in skin sensitization or otherwise. voir moins | Request Sample |
| EFKA® SL 3030 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...voir plus EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. voir moins | |
| EFKA® SL 3033 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...voir plus EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. voir moins | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 421 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 533 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C. | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend. | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting synthetic wax, and carnauba wax blend. This wax blend shows a melting peaks ranging from 84 – 110°C. | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion. Hydrocer ER-77 is used in both air dry and baked coatings. | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...voir plus KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. voir moins | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...voir plus KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. voir moins | |
| Michem® Dispersion 471 | Michelman | Michem® Dispersion 471 is a solvent dispersion of carnauba wax that has proven very effective for slip and abrasion resistance when used as an additive in the metal coatings industry. | |
| Michem® Guard 7140 | Michelman | Michem® Guard 7140 is a water-based, dispersion which improves blocking, rub and abrasion resistance, and matting in pigmented coatings and semi-gloss coatings, inks, and overprint varnishes and at very low addition rates. It also produces smooth satin fi...voir plus Michem® Guard 7140 is a water-based, dispersion which improves blocking, rub and abrasion resistance, and matting in pigmented coatings and semi-gloss coatings, inks, and overprint varnishes and at very low addition rates. It also produces smooth satin finishes at 5-10% addition rates. voir moins | |
| MONORAL® 619 | HS CHEM CO.,LTD | MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ...voir plus MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ink and urethane paint applications. voir moins | |
| MONORAL® 725 | HS CHEM CO.,LTD | MONORAL® 725 is a dispersion of low molecular weight polyethylene in toluene designed to impart abrasion and mar resistance and slip enhancing properties to the surface finish. This product is often used in gravure ink applications. | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| NANOBYK®-3605 | BYK 毕克 | NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparen...voir plus NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparency. It also improves chemical resistance. voir moins | |
| NANOBYK®-3620 | BYK 毕克 | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...voir plus NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. voir moins | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| NatureShield® 30 | Michelman | NatureShield® 30 contains 99.5% natural ingredients. This additive imparts good water bead to seed, wood and concrete coatings. | |
| Neptune 1-N1 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings. | |
| Neptune 1-N5 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based, air dry, and baked coatings. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...voir plus Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. voir moins | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| PLIOLITE® AC80 | Synthomer | PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coati...voir plus PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings. voir moins | |
| ProHere® L 90004 | Michelman | ProHere® L 90004 is a high solids emulsion which imparts lubricity and contributes to short term water resistance in metal coatings. | |
| ProHere® L 90009 | Michelman | ProHere® L 90009 is a nonionic polyethylene emulsion that imparts abrasion resistance, enhanced lubricity, scratch resistance and torque/tension control to metal coatings. | |
| ProHere® L 90010 | Michelman | ProHere® L 90010 is an nonionic polyethylene emulsion for metal coatings which imparts abrasion resistance, block and scratch resistance, enhanced lubricity, and torque/tension control. | |
| ProHere® L 90100 | Michelman | ProHere® L 90100 is an anionic polyethylene emulsion that imparts lubricity, scratch and abrasion resistance to metal coatings. | |
| ProHere® L 90104 | Michelman | ProHere® L 90104 is a nonionic polypropylene emulsion that imparts scratch and abrasion resistance to metal coatings as well as increasing CoF. | |
| ProHere® L 90600 | Michelman | ProHere® L 90600 is an anionic polyamide dispersion, that provides excellent lubricity, scratch and abrasion resistance and matting to the surface of metal coatings. | |
| ProHere® U 10002 | Michelman | ProHere® U 10002 is an anionic water-based polyurethane acrylic hybrid system used in the formulation of fast drying, fast hardening, abrasion resistant top coats for metal coatings. | |
| ProHere® U 10003 | Michelman | ProHere® U 10003 is an anionic water-based polyurethane dispersion used in the formulation of flexible, abrasion resistant, glossy top coat systems for metal coatings. | |
| R-1182 | NuSil Silicone Technology 1 | R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It ...voir plus R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It will provide a RTV, low friction coating on cured silicone substrates. For the best results this coating needs to be applied by spraying or dipping. voir moins | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...voir plus R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. voir moins | |
| S-232-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-232-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommeneded for all clear OPV, water-based, solvent-based, and UV coatings. | |
| S-379-N8 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-379-N8 is a synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-379-N8 is recommended for use in water-based and general purpose industrial coatings. | |
| S-390-C (Spherical Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-390-C is a spherical synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder. | |
| S-394-N1 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394 N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-N5 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394 N5 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-SD4 (Spherical Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-SD4 is a spherical synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-N5 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | S-395 N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. |
