| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...voir plus Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). voir moins | Request Sample |
| Bensub 2908 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2908 is a white powder and a degassing agent that has a density of 0.93. This product can reduce particulates on cured film, and is commonly used for interior and exterior powder coatings. | |
| Bensub 2999 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2999 is a white powder and a high-performance degassing agent that has a softening point of 95-115°C. This product has good discoloration resistance and is commonly used for interior and exterior powder coatings. | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective a...voir plus BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective as de-aerating and partially also as a levelling agent. This applies to the following binders: alkyd, alkyd/polyester-, unsaturated polyester-, NC-, AC-, PU, and acrylic systems. BLISTER FREE 3 is also very effective in water dilutable coating systems particularly, if they are based on alkyd/acrylics, saturated polyesters and epoxyde systems. voir moins | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...voir plus BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. voir moins | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special app...voir plus BLISTER FREE 54 is a defoamer for solvent borne coating systems. It reduces the surface tension in solvent borne and solvent free coating systems. This product also improves leveling and avoids cratering. This product is a clear yellow liquid. Special applications are printing inks and coil coating systems. voir moins | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...voir plus BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. voir moins | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...voir plus BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. voir moins | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented ...voir plus BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented and entrapped air as well as bubbles are quickly destroyed. Defoaming is promoted and defects like pinholes and craters are avoided. This product is a colourless to light yellowish liquid. voir moins | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying ...voir plus BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. BLISTER FREE 75 is a product with interfacial activity, which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is improved. voir moins | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...voir plus BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. voir moins | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or dur...voir plus BLISTER FREE 88 is a biodegradable defoamer for solvent borne coating systems. It is an interfacially active additive, which influences the surface tension. This property reduces the formation of bubbles to a minimum during the manufacture of paint or during application. Any bubbles formed are quickly destroyed. In general BLISTER FREE 88 has a beneficial effect on the flow of the paint film. It is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems. voir moins | |
| Borchi® Gol 0011 | OMG Borchers GmbH | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...voir plus Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. voir moins | |
| Borchi® Gol E2 | OMG Borchers GmbH | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...voir plus Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. voir moins | |
| BYK®-035 | BYK 毕克 | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK 毕克 | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK 毕克 | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins | |
| CERAFLOUR® 993 | BYK 毕克 | CERAFLOUR® 993 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 | BYK 毕克 | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 For Powder | BYK 毕克 | CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane...voir plus CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. voir moins | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...voir plus CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. voir moins | |
| EFKA® SI 2722 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...voir plus EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. voir moins | |
| EFKA® SI 2723 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth...voir plus EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids two-pack systems and solvent-free radiation-curable systems. voir moins | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...voir plus EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. voir moins | |
| Efka® SL 3239 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resist...voir plus Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resistance and acts as a defoamer and de-aeration aid. Efka® SL 3239 is particularly recommended for these coatings: baking enamels based on alkyd, acrylic or polyester resins; acid-curable or polyurethane wood finishes particularly when applied by curtain coating; self-leveling epoxy flooring compounds; and UV-curable paper lacquers. voir moins | |
| FOAMSTAR® SI 2292 NC | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products o...voir plus FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products or metal. Due to its long-term defoaming effect FOAMSTAR® SI 2292 NC has proved to be suitable in emulsion and suspension polymerization, particularly in the manufacture of PVC, vinyl acetate and acrylic emulsions. FOAMSTAR® SI 2292 NC may be used during polymerization and monomer stripping. voir moins | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...voir plus SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. voir moins | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly...voir plus Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly effective in hammer finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, which are suitable for airless spraying. This product is also effective in aqueous industrial finishes (alkyd/melamine systems). voir moins | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based ...voir plus SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based and solvent free paint systems. It improves levelling, prevents cratering and showing through the substrate. voir moins | |
| SCHWEGO® Foam 6356 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the f...voir plus SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented, and the film elasticity is improved. SCHWEGO® foam 6356 is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes and UV coating systems. voir moins | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...voir plus SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. voir moins | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...voir plus SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. voir moins | |
| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during...voir plus SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during the manufacture of paint or during application is reduced to a minimum. Any bubbles formed are quickly destroyed. In general SCHWEGO® foam 6388 has beneficial effect on the flow of the paint film. voir moins | |
| SCHWEGO® Foam 8325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a li...voir plus SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a light yellowish liquid. voir moins | |
| SURFYNOL® 118 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any fi...voir plus SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects. voir moins | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...voir plus Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. voir moins | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particu...voir plus TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying. voir moins | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901...voir plus TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying. voir moins | Request Sample |
| TEGO® Airex 901 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications. | Request Sample |
| TEGO® Airex 902 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air s...voir plus TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air spraying applications as well as for brush and roller applications. It is also recommended for use in self-leveling floor coatings. voir moins | Request Sample |
| TEGO® Airex 902 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam. | Request Sample |
| TEGO® Airex 904 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for ai...voir plus TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for airless spraying applications. It is also suitable for compressed air spraying and brush/roller applications. Haziness, caused by low temperatures, is reversible and does not affect the performance properties of TEGO® Airex 904 W. voir moins | Request Sample |
| TEGO® Airex 904 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility. | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coatin...voir plus TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications. voir moins | Request Sample |
| TEGO® Airex 920 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable fo...voir plus TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable for flexo and gravure printing. It is also suitable for compressed air spraying, as well as for dip coating, flow coating, and curtain coating voir moins | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this pr...voir plus TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C. voir moins | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...voir plus TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. voir moins | Request Sample |
| TEGO® Airex 923 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown. | Request Sample |
| TEGO® Airex 931 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling fl...voir plus TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling floor coating and compressed air spraying. It is also suitable for flexo/gravure printing, airless spraying, and brush and roller applications. voir moins | Request Sample |
| TEGO® Airex 940 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 940 shows good compatability combined with effectiveness against both micro- and macro-foam. Ideally suited for high-solid and 2K solvent-free formulations. | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...voir plus TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. voir moins | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...voir plus TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. voir moins | Request Sample |
| TEGO® Airex 978 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications. | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...voir plus TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. voir moins | Request Sample |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...voir plus TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. voir moins | Request Sample |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...voir plus TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. voir moins | Request Sample |
| TEGO® Guard 9000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Guard 9000 is an organically modified branched polysiloxane emulsion providing excellent quick-set properties. It is suitable for various decorative exterior paints. | Request Sample |
| TEGO® Rad 2500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is ...voir plus TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product. voir moins | Request Sample |
| TEGO® Wet 505 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO...voir plus TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. voir moins | Request Sample |
| TEGO® Wet KL 245 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings...voir plus TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings. voir moins | Request Sample |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...voir plus WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. voir moins | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...voir plus WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. voir moins | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...voir plus WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. voir moins | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...voir plus WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. voir moins | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...voir plus WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. voir moins | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...voir plus WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). voir moins | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...voir plus WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. voir moins | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...voir plus WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. voir moins | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...voir plus WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. voir moins | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...voir plus WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. voir moins | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | WorléeAdd 602 is an antifoam agent and defoamer mainly for 2 compound PUR and epoxy resin coatings. W´Add 602 should be added to the binder during production before the addition of other additives. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition impr...voir plus WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. voir moins | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with vario...voir plus WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. voir moins | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...voir plus WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. voir moins | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and e...voir plus WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. W´Add 902 is provided as a free flowing powder which is convenient in handling easy to disperse and reliable in performance. voir moins | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and elimi...voir plus WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. This product is provided as a granulate which is convenient in handling and easy to disperse. voir moins | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add...voir plus WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add 915 is a free flowing powder which is convenient in handling, easy to disperse and reliable in performance. voir moins |
