| Accelerator 2950 | Huntsman Advanced Materials 亨斯迈先进材料 | Accelerator 2950 Hardener is an effective accelerator and/or co-hardener when used in combination with polyamines, polyamidoamines and their adducts. It is used to cure liquid epoxy resins such as Araldite® GY 9708-3 Resin, Araldite® PY 302-2 resin, or si...voir plus Accelerator 2950 Hardener is an effective accelerator and/or co-hardener when used in combination with polyamines, polyamidoamines and their adducts. It is used to cure liquid epoxy resins such as Araldite® GY 9708-3 Resin, Araldite® PY 302-2 resin, or similar resins for solvent-free coatings and flooring systems. It is also used to cure solid epoxy resins or their solvent cuts such as Araldite® GZ 7071 X 75 resins and Araldite® GZ 571 KX 75 resins for solvent containing marine and maintenance coatings. Accelerator 2950 Hardener is also an effective accelerator and co-hardener in polyurethane systems when used at 1-3% on binder. voir moins | |
| ADDITOL® P 791 | Allnex | ADDITOL® P 791 is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed. | Request Sample |
| AQUACER® 507 | BYK 毕克 | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...voir plus AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). voir moins | |
| Ara®Cool 1034 XW 90 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1034 XW 90 is a modified Mannich-Base type hardener. It offers outstanding hardness development as well as excellent flexibility, adhesion, and corrosion protection benefits. This product is suitable for low-temperature anti-corrosion coatings on...voir plus Ara®Cool 1034 XW 90 is a modified Mannich-Base type hardener. It offers outstanding hardness development as well as excellent flexibility, adhesion, and corrosion protection benefits. This product is suitable for low-temperature anti-corrosion coatings on sand-blasted steel, for marine and maintenance paints to coat floors and walls, and for a multitude of general-purpose protective/decorative paints. voir moins | |
| Ara®Cool 1047 W80 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. T...voir plus Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. This product imparts good hardness, outstanding surface appearance, recoatability, flexibility, and adhesion. voir moins | |
| Ara®Cool 3077 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 3077 is an amine based fast curing hardener without nonylphenol and benzyl alcohol. It can be used as hardener itself when applied with 2 – feed spray equipment or to speed up cure of slow reacting hardener formulations. This product is recommend...voir plus Ara®Cool 3077 is an amine based fast curing hardener without nonylphenol and benzyl alcohol. It can be used as hardener itself when applied with 2 – feed spray equipment or to speed up cure of slow reacting hardener formulations. This product is recommended for use in combination with suitable epoxy resins like Araldite® PY 302-2, GY 783 or BY 158 for fast curing coatings and flooring applications. voir moins | |
| Aradur® 340 Waterborne Epoxy Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 340 Waterborne Epoxy Hardener emulsifies liquid epoxy resins, without first having them preemulsified, to produce waterborne high solids, ambient-cured coatings for a variety of industrial applications. It is also possible to combine Aradur® 340 W...voir plus Aradur® 340 Waterborne Epoxy Hardener emulsifies liquid epoxy resins, without first having them preemulsified, to produce waterborne high solids, ambient-cured coatings for a variety of industrial applications. It is also possible to combine Aradur® 340 Waterborne Epoxy Hardener with epoxy resin emulsions. voir moins | |
| Aradur® 450 Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 450 Hardener is a low viscosity curing agent developed specifically for use in highly humid or wet application areas. Aradur 450 Hardener may be formulated with liquid bisphenol A and /or bisphenol F epoxy resins to provide optimum properties on w...voir plus Aradur® 450 Hardener is a low viscosity curing agent developed specifically for use in highly humid or wet application areas. Aradur 450 Hardener may be formulated with liquid bisphenol A and /or bisphenol F epoxy resins to provide optimum properties on wet concrete substrates. voir moins | |
| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...voir plus Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. voir moins | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...voir plus BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. voir moins | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...voir plus BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. voir moins | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...voir plus BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. voir moins | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...voir plus BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. voir moins | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...voir plus BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. voir moins | Request Sample |
| BECKOPOX™ EH 2166w/80WA | Allnex | BECKOPOXTM EH 2166w/80WA is an aliphatic polyamine adduct. It is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...voir plus Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. voir moins | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...voir plus BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. voir moins | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| CERAFLOUR® 920 For Powder | BYK 毕克 | CERAFLOUR® 920 For Powder is an additive to improve surface hardness of UV powder coatings. It is composed of a micronized organic polymer. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics....voir plus CERAFLOUR® 920 For Powder is an additive to improve surface hardness of UV powder coatings. It is composed of a micronized organic polymer. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. The additive yields excellent surface protection and matting. In combination with CERAFLOUR® 950 (see data sheet H31) it is recommended for UV powder coatings. voir moins | |
| CERETAN MXD 3920 | Munzing Chemie | CERETAN MXD 3920 is a white powder that is a micronized wax preparation, with a coating which provides diamond-like hardness. It has excellent surface hardness and scratch resistance. It is commonly used in industrial coatings, powder coatings, wood coati...voir plus CERETAN MXD 3920 is a white powder that is a micronized wax preparation, with a coating which provides diamond-like hardness. It has excellent surface hardness and scratch resistance. It is commonly used in industrial coatings, powder coatings, wood coatings, can and coil coating. voir moins | |
| Desmodur® N 3900 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® N 3900 is a low-viscosity, aliphatic polyisocyanate resin based on hexamethylene diisocyanate, and can be used as the hardener for weather-stable coating systems. It has an NCO content of 23.5 ± 0.5% by wt., a monomeric HDI < 0.3%, a density of ...voir plus Desmodur® N 3900 is a low-viscosity, aliphatic polyisocyanate resin based on hexamethylene diisocyanate, and can be used as the hardener for weather-stable coating systems. It has an NCO content of 23.5 ± 0.5% by wt., a monomeric HDI < 0.3%, a density of approx. 1.15g/cm^3, and a viscosity at 23°C of 730 ± 100 mPa·s. Desmodur® N 3900 is used to formulate high-solids systems for automotive refinishing, transportation coating and plastics coating. voir moins | |
| Desmodur® XP 2714 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2714 is a silane-functional aliphatic polyisocyanate based on hexamethylene diisocyanate for use as the hardener component for lightfast, weather-stable coating systems. This product has an NCO content of approx. 15.9%, a viscosity at 23°C ap...voir plus Desmodur® XP 2714 is a silane-functional aliphatic polyisocyanate based on hexamethylene diisocyanate for use as the hardener component for lightfast, weather-stable coating systems. This product has an NCO content of approx. 15.9%, a viscosity at 23°C approx. 1,350 mPa·s, and a monomeric HDI of < 0.5%. Coatings based on Desmodur® XP 2714 are characterized by their excellent adhesion on metallic and mineral substrates. Therefore Desmodur® XP 2714 is particularly suitable for direct-to-metal coatings, e.g. in combination with Desmophen® NH-grades for corrosion protection applications. voir moins | |
| Desmodur® XP 2731 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2731 is an aliphatic polyisocyanate (HDI allophanate trimer), and is the hardener component for solvent-free, light fast, scratch-resistant polyurethane coating systems. It is primarily in combination with solvent-free Desmophen® grades for i...voir plus Desmodur® XP 2731 is an aliphatic polyisocyanate (HDI allophanate trimer), and is the hardener component for solvent-free, light fast, scratch-resistant polyurethane coating systems. It is primarily in combination with solvent-free Desmophen® grades for in-mold coatings. This product has an NCO-content of approx. 19.5%, an equivalent weight of approx. 215, a density at 20°C of approx. 1.17g/cm^3. voir moins | |
| DMBA | DKSH | DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available ...voir plus DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat. This Product is available in Asia Pacific and Europe. voir moins | Request Sample |
| Docure KC-305H | Kukdo Chemical Co., Ltd. | Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...voir plus Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. voir moins | |
| Docure KC-335H | Kukdo Chemical Co., Ltd. | Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...voir plus Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. voir moins | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-506 | Kukdo Chemical Co., Ltd. | Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures. | |
| Docure KH-531 | Kukdo Chemical Co., Ltd. | Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the lam...voir plus Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the laminating industries. voir moins | |
| Docure KH-550 | Kukdo Chemical Co., Ltd. | Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in ...voir plus Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in injection systems and the production of solvent free coatings. voir moins | |
| Docure KH-602 | Kukdo Chemical Co., Ltd. | Docure KH-602 is an aliphatic amine modified hardener. KH-602 can be used as solvent free system due to low viscosity. It can be used for Injection systems and resin mortars. In addition it is well suited for use as an accelerator for other curing agents. | |
| Docure KH-620 | Kukdo Chemical Co., Ltd. | Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemica...voir plus Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemical processing equipment, tank linings and maintenance coatings. voir moins | |
| Domide GX-328B75 | Kukdo Chemical Co., Ltd. | Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...voir plus Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. voir moins | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...voir plus Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. voir moins | |
| Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...voir plus Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. voir moins | |
| Domide GX-450TI60 | Kukdo Chemical Co., Ltd. | Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-450XB70 | Kukdo Chemical Co., Ltd. | Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...voir plus Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. voir moins | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...voir plus Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. voir moins | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...voir plus Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. voir moins | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...voir plus Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. voir moins | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...voir plus Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. voir moins | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesive...voir plus Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesives for shoes and wood to obtain D4 classification according to EN 204. It is also suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery, and accessory leather products as well as for 3D lamination applications in the automotive and furniture industries. voir moins | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...voir plus Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. voir moins | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...voir plus Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. voir moins | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...voir plus Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. voir moins | |
| Eutomer 288 (MDSA) | Eutec Chemical Co., Ltd. | Eutomer 288 (MDSA) is a white to light tan crystalline powdered form of 5,5’-Methylenedisalicylic Acid. It can be used as a hardener for powder coatings and thermosetting resins. | |
| Eutomer B-31 | Eutec Chemical Co., Ltd. | Eutomer B-31 is a white to pale yellow flaked 2-Phenyl Imidazoline. This product is used as a hardener for highly reactive epoxy resin powder coatings. | |
| Eutomer B-55 | Eutec Chemical Co., Ltd. | Eutomer B-55 is a white to off-white very fine powdered 1,2,4,5-Benzenetetracarboxylic acid, compound with 4,5-dihydro-2-phenyl-1H-imidazole (1:2). This product is used as a matting hardner for pure epoxy or epoxy/polyester resins powder coatings. | |
| Eutomer B-68 | Eutec Chemical Co., Ltd. | Eutomer B-68 is a white to off-white very fine powdered 1,2,4,5-Benzenetetracarboxylic acid, compound with 4,5-dihydro-2-phenyl-1H-imidazole (1:1). It is used as a matting hardener for pure epoxy or epoxy/polyester resins powder coatings. | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...voir plus Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. voir moins | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82044 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...voir plus Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. voir moins | |
| Grilonit® H 84026 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...voir plus Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. voir moins | |
| Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
| HAA Hardener RC552 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC552 is a tetra-functional group containing β-hydroxyalkylamide. This product appears as a white powder. It is designed to be a substitute for TGIC and can be used to provide exterior-durable powder coatings free from TGIC. | |
| HAA Hardener RC559 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC559 is a hydroxyalkyl amide hardener. This product appears as a white granular solid. It can be used to cure carboxyl-functional polyester for powder coating applications. | |
| Hardener RC-31 | Hangzhou Right Chemical Co., Ltd. | Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelera...voir plus Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelerator for dicyandiamide and epoxy polyester powder coatings. voir moins | |
| Hardener RC2844 | Hangzhou Right Chemical Co., Ltd. | Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatin...voir plus Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatings. voir moins | |
| HARDENER X 60 | Pidilite Industries Ltd. - Resins Division | HARDENER X 60 is An aromatic isocyanate solution used as hardener for two pack poly urethane coatings. This product is susceptible to moisture. When stored in sealed containers the shelf life is around six months. Half filled containers should be purged w...voir plus HARDENER X 60 is An aromatic isocyanate solution used as hardener for two pack poly urethane coatings. This product is susceptible to moisture. When stored in sealed containers the shelf life is around six months. Half filled containers should be purged with dry nitrogen. voir moins | |
| HS2266 | Tianyi Chemical Engineering Material Co., Ltd. | HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. Th...voir plus HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. This product has a pH value between 8.0 and 9.0. It has a density between 1.08 and 1.12 g/cm3. voir moins | |
| HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...voir plus HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. voir moins | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...voir plus Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. voir moins | Request Sample |
| ITAMID B | DKSH | ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings ...voir plus ITAMID B is a polyaminoamide resin of high viscosity at room temperature and which is used combined with liquid or solid epoxy resins to obtain products hardening even at room temperature and which is used in the anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID B, which can also be used neat, is usually used in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems ITAMID B is usually used in combination with liquid epoxy resins giving high adhesion properties. With an epoxy resin of an epoxy weight equivalent of about 190g/eq, ITAMID B is normally used in equal parts. This ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamide resin increases flexibility but reduces resistance to chemicals. More frequently ITAMID B is combined with a solid epoxy resin in solvent systems whose pot-life changes with the percentage of solvent and temperature in addition to the type of epoxy resin used. For example, a formulation with 40% of solvents with an epoxy resin of epoxy equivalent weight 475 and a ratio of 65/35 epoxy to polyamide will exhibit a pot-life at room temperature of about two days. voir moins | Request Sample |
| ITAMID C | DKSH | ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resi...voir plus ITAMID C is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. voir moins | Request Sample |
| ITAMID C/F | DKSH | ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high ...voir plus ITAMID C/F is a medium viscosity polyaminoamide resin which is used combined with liquid or solid epoxy resins to obtain room temperature hardening products. ITAMID C/F is used above all in the field of anticorrosion paints, protective coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces. ITAMID C/F, can be dissolved readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. In solvent free systems, ITAMID C/F when used combined with liquid epoxy resins gives rise to products featuring high adhesion properties and which can be applied by spatula process or by spraying. When ITAMID C/F is used with an epoxy resin with an epoxy equivalent weight of around 190, the normal ratio used is 60 p.p. of epoxy to 40 p.p. of polyaminoamide. However, this ratio can be varied, even widely, whilst bearing in mind that a greater percentage of polyamine resin increases flexibility but reduces resistance to chemicals. In solvent systems ITAMID C/F is usually combined with a solid epoxy resin whose pot-life changes with the percentage of dryness and temperature in addition to the type of epoxy used. For example, a formulation at dryness 40% with an epoxy resin of epoxy weight equivalent 475 and a ratio of 75/25 epoxy to polyamine will exhibit a pot-life at room temperature of about two days. voir moins | Request Sample |
| ITAMID D | DKSH | ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coating...voir plus ITAMID D is a rather fluid polyaminoamide resin which is used in combination with epoxy resins, mainly liquid ones, to obtain hardening products even at room temperature and which are used above all in the field of reactive adhesives, solvent free coatings with high resistance to chemical agents in general and with excellent properties of toughness, flexibility and adhesion to the most different surfaces and good thermal resistance. ITAMID D, which is normally used neat, however dissolves readily in organic solvents such as alcohol, aromatic hydrocarbons, glycol ethers and their mixtures. The low viscosity of ITAMID D when used in combination with liquid epoxy resins gives rise to products which can be applied even by processes of spatula, spraying and pouring. When ITAMID D is used in combination with an epoxy resin with a epoxy equivalent weight of around 190, depending on the applications the ratio between epoxy and polyamine may vary between 65/35 and 75/25 with pot-lives varying between 110 and 130 minutes. It must however be keep in mind that a higher percentage of polyamine resin increases flexibility but reduces the resistance to chemical agents. voir moins | Request Sample |
| ITAMID FL 560 | DKSH | ITAMID FL 560 is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete and Very good handling. | Request Sample |
| ITAMID FL 560S | DKSH | ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...voir plus ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. voir moins | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...voir plus ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. voir moins | Request Sample |
| ITAMID FL31 | DKSH | ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...voir plus ITAMID FL31 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL31 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL31 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. voir moins | Request Sample |
| ITAMID FL32 | DKSH | ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings...voir plus ITAMID FL32 is a liquid epoxy resin hardener made up of low viscosity, modifyed polyaminoamide-imidazoline resin. ITAMID FL32 is used in the formulation of epoxy mortars (for repair of concrete, etc.), in the formulation of adhesives, paints and floorings. Compared with traditional hardeners, ITAMID FL32 exhibits no sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M160 or ITAMINE MB501. voir moins | Request Sample |
| ITAMID FL328 | DKSH | ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concre...voir plus ITAMID FL328 is a liquid epoxy resin hardener made up of low viscosity, modified polyaminoamide adduct. ITAMID FL328 allow the dispersion of epoxy resin in water. ITAMID FL328 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.) and primer. voir moins | Request Sample |
| ITAMID FL40/S | DKSH | ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masse...voir plus ITAMID FL40/S is a liquid epoxy resin hardener made up of low viscosity polyaminoamide-imidazoline resin. ITAMID FL40/S is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL40/S exhibits lower sensitivity to carbonatation and lower reactivity, i.e. it gives longer utilisation and hardening times. voir moins | Request Sample |
| ITAMID FL41W3 | DKSH | ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulatio...voir plus ITAMID FL41W3 is a liquid epoxy resin hardener made up of a modified, low viscosity polyaminoamide resin. ITAMID FL41W3 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, ITAMID FL41W3 exhibits improved resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures and in presence of water. voir moins | Request Sample |
| ITAMID FL540 | DKSH | ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. | Request Sample |
| ITAMINE CA165 | DKSH | ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure te...voir plus ITAMINE CA 165 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for solvent free systems or coatings. ITAMINE CA 165 cure fast and produce coatings and flooring with a good aesthetic appearance and high gloss, even at low cure temperatures. ITAMINE CA 165 has good resistance to water spotting and also features good blush resistance. voir moins | Request Sample |
| ITAMINE CA30 | DKSH | ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for applica...voir plus ITAMINE CA30 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems): ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. voir moins | Request Sample |
| ITAMINE CA30LA | DKSH | ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for app...voir plus ITAMINE CA30LA is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA30LA is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems). voir moins | Request Sample |
| ITAMINE CA80 | DKSH | ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for applica...voir plus ITAMINE CA80 is a modified cycloaliphatic polyamine based hardener for Epoxy Resins which is particularly indicated for solvent free coatings, self levelling mortars and adhesives. Due to its low viscosity ITAMINE CA80 is additionally suitable for application systems of pouring, injection (concrete) and in high filled formulates (e.g. epoxy-tar systems) The main properties of this hardener are the following: COMPLETE CURING EVEN AT LOW TEMPERATURE (0°C), ABSENCE OF PHENOL AND AROMATIC AMINES, EXCELLENT FETURES OF STRENGTH AND RESISTANCE TO CHEMICALS, EXCELLENT SMOOTH FLOW (SELF-LEVELLING) and LOW VISCOSITY. voir moins | Request Sample |
| ITAMINE FL43 | DKSH | ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...voir plus ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). voir moins | Request Sample |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...voir plus Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. voir moins | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...voir plus Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. voir moins | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...voir plus Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. voir moins | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...voir plus Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. voir moins | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...voir plus Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. voir moins | |
| Luna-cure PACM | DKSH | Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...voir plus Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. voir moins | Request Sample |
| Luna-mer 1174 | DKSH | Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is avai...voir plus Luna-mer 1174 is a glycoluril type hardener used to produce powder coatings having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications. This product is available in Europe, Asia and North America. voir moins | Request Sample |
| Luna-mer B-31 | DKSH | Luna-mer B-31 is a hardener for highly reactive epoxy powder coatings, pure epoxy and accelerator for DICY or epoxy-polyester powder coatings. This product is available in Europe, Asia and North America. | Request Sample |
