UL Prospector
Prospector
Keyword: formulation 

Succès!

Vous avez enregistré votre recherche avec succès
4085 Résultats
Kingmide 533 Sanho Chemical Co., Ltd. Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications.
Kingmide 315-FS Sanho Chemical Co., Ltd. Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications.
Kingmide 507-KS Sanho Chemical Co., Ltd. Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications.
CRYLCOAT® 4688-2 Allnex CRYLCOAT® 4688-2 is a carboxylated polyester resin for the formulation of flexible superdurable powder coatings with Primid® XL-552. Coatings based on CRYLCOAT® 4688-2 can be used for agricultural and construction equipment. Request Sample
CRYLCOAT® 2505-4 Allnex CRYLCOAT®2505-4 is a polyester resin for clear exterior durable powder coatings with outstanding flow and transparency. This resin is designed for formulation with 8-9% Araldite® PT-910. Formulations do not require additional flow promoters. Request Sample
Coapur™ 2025 Arkema Rheology & Specialty Additives Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. Request Sample
ITAMID FL300 DKSH ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...voir plus ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. voir moins Request Sample
WorléeCryl® 7410 Worlée-Chemie G.m.b.H. WorléeCryl® 7410 is a self cross linking acrylic copolymer emulsion. This grade is supplied in the form of 45% in water. It is an acrylic emulsion for the formulation of aqueous wood and furniture lacquers.
RESYDROL® AN 6481w/70BBP Allnex Resydrol® AN 6481W/70BBP is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. Request Sample
RESYDROL® AN 6483/30WA Allnex RESYDROL® AN 6483/30WA is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. Request Sample
Uniplex 280CG Rhein Chemie Rheinau GmbH Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. It provides high gloss, film hardness, flexibility, and water and alcohol resistance. Uniplex 280CG is used as a modifier for clear lacquers, in the formulation of clear coatings for wood, paper, and metal, in the formulation...voir plus Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. It provides high gloss, film hardness, flexibility, and water and alcohol resistance. Uniplex 280CG is used as a modifier for clear lacquers, in the formulation of clear coatings for wood, paper, and metal, in the formulation of ink systems, in ultraviolet inks and coatings, metallic and pigmented coatings, and heat seal coatings. voir moins
BLUESIL PI 2074 Elkem Silicones BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems.
Kingmide 326-A Sanho Chemical Co., Ltd. Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications.
Desmophen® 1300 X Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g r...voir plus Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 75 ± 1. Desmophen® 1300 X is especially suitable for the formulation of fast-drying two-pack systems. These are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. voir moins
TEGO® Foamex 842 Evonik Operations GmbH, BL Coating Additives TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation...voir plus TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. TEGO® Foamex 842 is highly suitable for flexo/gravure printing. It is also suitable for both airless and compressed air spraying. voir moins Request Sample
Desmophen® 1400 PR 75% MIBK Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding seal...voir plus Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding sealers and two-component clear and pigmented top coats for wood. It can be also used in coating systems for metal and plastics. This product has an iodine color value (50% solution) of < 5, a flash point of < 3°C, and a viscosity at 23°C of 13.000 ± 2.000 mPa·s. voir moins
ECOPUD-42-45 Ecopol Tech ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...voir plus ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. voir moins
Kingmide 549 Sanho Chemical Co., Ltd. Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications.
Tohmide 90 Sanho Chemical Co., Ltd. Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications.
Tohmide 92 Sanho Chemical Co., Ltd. Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications.
Kingmide 315-FC Sanho Chemical Co., Ltd. Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications.
Kingmide 513-F Sanho Chemical Co., Ltd. Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications.
SILCOLEASE RCA 391 Elkem Silicones SILCOLEASE RCA 391 is a release modifier designed to give incremental levels of release when added to a release coating formulation.  SILCOLEASERCA 391 may be used at addition levels from 1% to 100% of the polymer component in the formulation with release...voir plus SILCOLEASE RCA 391 is a release modifier designed to give incremental levels of release when added to a release coating formulation.  SILCOLEASERCA 391 may be used at addition levels from 1% to 100% of the polymer component in the formulation with release values increasing proportionally.  Unlike traditional tight release modifiers which are based on vinyl functional silicone resins, SILCOLEASERCA 391 is based on hydride functional silicone resin technology.  As a result, SILCOLEASERCA 391 may offer greater efficiency as a tight release modifier compared to vinyl functional products against certain adhesives. voir moins
Desmophen® 1300 BA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1...voir plus Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1, a viscosity at 23°C of 1,000 ± 200 mPa·s, and an equivalent weight of approx. 530. Desmophen® 1300 BA is especially suitable for the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. voir moins
Epoxies® 50-3170 Epoxies, Etc. Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and f...voir plus Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and flexibility on long term aging. This allows pottings and castings to be probed for detection of electrical failure. 50-3170 can be used for bonding sensitive components or for potting of power supplies, coils, glass diodes, and other delicate assemblies. This new formulation can be used successfully for transformers, regulators, PCB's, etc... voir moins
ITAMINE FL43 DKSH ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Com...voir plus ITAMINE FL43 is an liquid epoxy resin hardener made up of modified aliphatic polyamines. ITAMINE FL43 is used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, encapsulations and paints. Compared with traditional hardeners, such as polyaminoamide resins, ITAMINE FL43 exhibits greater reactivity, resistance to chemical agents and dilute inorganic acids, and pronounced capacity for reaction at low temperatures. Finally, comparing the classical amine hardeners, which are normally classified as “corrosive” substances, ITAMINE FL43 exhibits lower hazard (it is actually classified only as an “irritating” substance). voir moins Request Sample
Acclaim® Polyol 4200 Covestro (formerly Bayer MaterialScience) 科思创 Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 a...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 and an acid humber of 0.004 - 0.020. Acclaim® Polyol 4200 is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins
Luna PTSI P DKSH Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...voir plus Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. voir moins Request Sample
EBECRYL® P39 Allnex EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...voir plus EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. voir moins Request Sample
SETALUX® D A 575 X Allnex Setalux D A 575 X is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N grades, in the formulation of two-component polyurethane coatings with good resistance to accelerated and outdoor weathering. Request Sample
Kingcure 800-C Sanho Chemical Co., Ltd. Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications.
Desmodur® E XP 2723 Covestro (formerly Bayer MaterialScience) 科思创 Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. Thi...voir plus Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. This product has an NCO content of approx. 15.4%, a flash point of approx. 223°C, and a density at 20°C of approx. 1.12 g/ml. Desmodur® E XP 2723 is suitable for use in the formulation of moisture-curing one-component systems which, when thinned with a suitable solvent, can be used as a primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. In combination with suitable Desmophen® polyols, Desmodur® E XP 2723 yields tough but flexible, wear-resistant coatings and sealers. voir moins
Bayhydrol® UV XP 2775 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented c...voir plus Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented coatings with high pigment content and resistance properties. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39.0-42.0, a viscosity at 23°C of < 150, and a pH level of approx. 7.0-9.0. Bayhydrol® UV XP 2775 is used for the formulation of high quality waterborne UV coatings for furniture.Depending on the formulation and the method of application, it is possible to produce finished surfaces that conform to the resistance requirements of DIN 68861, 1B. Bayhydrol® UV XP 2775 is especially usable for white pigmented coatings with high pigment content and resistance properties. After evaporation of water, the coating is physically dry and tack-free. voir moins
Bayhydur® BL 5335 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a no...voir plus Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a non-volatile content (1g / 1h / 105°C) of 34-36, a flow time at 23°C, (4mmcup) of 10-30, a pH at 20°C of 4.4-6.0. Bayhydur® BL 5335 is a blocked polyisocyanate and was developed for industrial use. It is used as a hardener for the formulation of lightfast one-component polyurethane baking coatings suitable for spray, dip or roller application. The product is preferably used in glass coating applications. It can be used in combination with Bayhydrol® U XP 2239 for the formulation of hydrolytically stable coatings with good glass adhesion and outstanding resistance to solvents and chemicals, in particular sodium hydroxide. Baking parameters are 30 minutes at 170°C. voir moins
Rexin K 6258 S.A.P.I.C.I. SpA Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes.
Polurene OK K S.A.P.I.C.I. SpA Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties.
KAPU IL-50 Keeneyes International Co., Ltd. KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates.
ITAMID FL540 DKSH ITAMID FL540, is a liquid epoxy resin hardener made up of a low viscosity, modified polyaminoamide adduct. ITAMID FL540 is used in the formulation of adhesives, epoxy mortars and paints even on wet surfaces and under water. Request Sample
Kingmide 530 Sanho Chemical Co., Ltd. Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications.
Tohmide 393 Sanho Chemical Co., Ltd. Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications.
Cappoxyt Yellow 4214X Ferro Pigments Cappoxyt Yellow 4214X is a further version of transparent iron oxide yellow, which exhibits somehow higher transparency than 4212X. It is especially developed for the formulation of wood protection paints (lasure) and effect shades for automotive coatings...voir plus Cappoxyt Yellow 4214X is a further version of transparent iron oxide yellow, which exhibits somehow higher transparency than 4212X. It is especially developed for the formulation of wood protection paints (lasure) and effect shades for automotive coatings. voir moins
Kingmide 550 Sanho Chemical Co., Ltd. Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications.
Bayhydrol® HD 2017 Covestro (formerly Bayer MaterialScience) 科思创 Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings.
Kingcure E-325 Sanho Chemical Co., Ltd. Kingcure E-325 is a modified cycloaliphatic polyamine in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure E-325 is most commonly used in solvent-free coating formulation applications.
Fujicure 4200 Sanho Chemical Co., Ltd. Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications.
Tohmide TXS-53C Sanho Chemical Co., Ltd. Tohmide TXS-53C is a self-emulsifiable epoxy curing agent in a yellow-brown liquid form. This product has a viscosity of 3000-12,500 mPa.s. Tohmide TXS-53C is most commonly used in concrete primer formulation applications.
Razeen® LR 1166 Jubail Chemical Industries Co. Razeen® LR 1166 is a general purpose, low viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1166 is used in the formulation of automotive body coatings.
KONDICRYL SV 204 (V) Pidilite Industries Ltd. - Resins Division KONDICRYL SV 204 (V) is a thermoplastic acrylic polymer in solution form. It is used in the formulation of lacquers, varnishes, and general purpose coatings. It is also used on paperboard as a varnish in Blister Packaging application.
Tetra-Isopropyl Titanate Anhui Taichang Chemical Co., Ltd. Tetra-Isopropyl Titanate is an intermediate derived from titanium. This product appears as a light yellow, transparent liquid. It can be used as a catalyst additive in coating primers or added to that formulation as an adhesion promoter.
Acetanil Yellow R 6514C Ferro Pigments Acetanil Yellow 6514C is a monoazo yellow of a very clean and reddish shade. This pigment can be used for the formulation of lead-free paints. It is suitable for use in both decorative and industrial airdrying paints.
Kingmide 710-SS Sanho Chemical Co., Ltd. Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications.
Kingmide 384-S Sanho Chemical Co., Ltd. Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications.
Bisomer® CL HEMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins
Bisomer® HEMA HP GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins
Araldite® GT 6750 Jubail Chemical Industries Co. Araldite® GT 6750 is a solid, high flow epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity. Araldite® GT 6750 is designed for use in the formulation of thin film hybrid powder coatings.
Fujicure 4030 Sanho Chemical Co., Ltd. Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications.
Desmodur® PC-N Covestro (formerly Bayer MaterialScience) 科思创 Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity a...voir plus Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, colourless to yellowish liquid of low viscosity at temperatures above 15°C that crystallizes at lower temperatures. It has an NCO content of 26.0 ± 1.0%, a vapor pressure at 20°C (MDI) of < 10^-5 hPa, and a density 25°C of 1.22g/cm^3. Desmodur® PC-N can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® PC-N is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins
Desmodur® VK 5 Covestro (formerly Bayer MaterialScience) 科思创 Desmodur® VK 5 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI), and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low vis...voir plus Desmodur® VK 5 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI), and is suitable for combination with Baycoll® in the formulation of adhesives. It is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C that may partially crystallize at lower temperatures. This product has a pot life of 25-35 min., a phenyl isocyanate content of max. 50mg/kg, and a vapor pressure at 20°C (MDI) < 10^-5 hPa. Desmodur® VK 5 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 5 is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the high vapor pressure of Desmodur® VK 5, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins
Desmodur® VKS 10 Covestro (formerly Bayer MaterialScience) 科思创 Desmodur® VKS 10 is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). Thi...voir plus Desmodur® VKS 10 is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. It is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, which may partially crystallise at lower temperatures. This product has a phenyl isocyanate content of max. 50mg/kg, a vapor pressure at 20°C (MDI) < 10^-5 hPa, density at 20°C of approx. 1.2g/cm^3. Desmodur® VKS 10 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. It is particularly suitable for combining with Baycoll in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins
Desmophen® 680 BA Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be use...voir plus Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying two-component coatings. This product as a viscosity at 23°C of 3,000 ± 500 mPa·s, a non-volatile content (2g resin/2ml toluene/1h 125°C, convection oven) of 70±1%, and a flash point of approx. 32°C. Desmophen® 680 BA is a hard co-reactant for use with Desmodur® N. The drying properties of this combination are comparable with those of the acrylic Desmophen® resin/Desmodur® N systems developed specially for automotive repair paints. It is therefore particularly suitable for the formulation of air-drying automotive and industrial coatings. Coatings crosslinked with Desmodur® L and HL are particularly fast-drying, making them suitable for applications such as paper finishing. voir moins
CAF 2534 Elkem Silicones CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls.
Desmodur® VK 10 Covestro (formerly Bayer MaterialScience) 科思创 Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. Thi...voir plus Desmodur® VK 10 is a mixture of diphenylmethane-4,4'-diisocyanate (MDI), with isomers and higher functional homologues (PMDI). It is a mixture of monomeric polyisocyanates that is suitable for combination with Baycoll® in the formulation of adhesives. This product is a solvent-free, dark brown liquid of low viscosity at temperatures above 10°C, that may partially crystallise at lower temperatures. It has an NCO content of 31.5 ± 1.0%, a viscosity 25°C 90 ± 20 mPa·s, a pot life of 12 - 16 min., and a vapor pressure at 20°C (MDI) < 10^-5 hPa. Desmodur® VK 10 can be combined with Baycoll in the formulation of adhesives for bonding many materials, e.g. wood, metal and plastics. Desmodur® VK 10 is particularly suitable for combining with Baycoll® in the formulation of reactive two-component adhesives and moisture-curing one-component adhesives. On account of the vapour pressure of MDI, especially at elevated temperatures, adhesives with free isocyanate groups can only be handled in work areas with adequate extraction. voir moins
Kingmide 701 Sanho Chemical Co., Ltd. Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications.
Kingmide 715-A Sanho Chemical Co., Ltd. Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications.
Tohmide 252 Sanho Chemical Co., Ltd. Tohmide 252 is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 100-400 mPa.s and a specific gravity of 0.96. Tohmide 252 is most commonly used in adhesive formulation applications.
Desmophen® 2060 BD Covestro (formerly Bayer MaterialScience) 科思创 Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1...voir plus Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1.7 ± 0.05 % by wt., and a viscosity at 25°C of 310 ± 25 mPa·s. Desmophen® 2060 BD is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins
Kingmide 550-A Sanho Chemical Co., Ltd. Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications.
Kingcure D-211 Sanho Chemical Co., Ltd. Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications.
Tohmide 394-N Sanho Chemical Co., Ltd. Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications.
Fujicure FXR-1020 Sanho Chemical Co., Ltd. Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications.
Fujicure FXR-1030 Sanho Chemical Co., Ltd. Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications.
Fujicure FXR-1081 Sanho Chemical Co., Ltd. Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications.
Kingmide 550-G Sanho Chemical Co., Ltd. Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications.
Razeen® LR 1160 Jubail Chemical Industries Co. Razeen® LR 1160 is a liquid, unmodified, medium to high viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1160 is used in the formulation of automotive body coatings.
KONDICRYL SVOL 46 Pidilite Industries Ltd. - Resins Division KONDICRYL SVOL 46 is a hydroxyl functional acrylic resin designed for formulation of two component polyurethane coatings. Application suggestion is industrial coatings & wood coatings: KSVOL 46 is recommended for formatting industrial top coats for metals...voir plus KONDICRYL SVOL 46 is a hydroxyl functional acrylic resin designed for formulation of two component polyurethane coatings. Application suggestion is industrial coatings & wood coatings: KSVOL 46 is recommended for formatting industrial top coats for metals, plastics and wood coatings. voir moins
Kingmide 150-50 Sanho Chemical Co., Ltd. Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications.
Heat resistant Anti-Corrosion Paint up to 400°C (Formulation #R21402_0_1) Hoffmann Mineral 霍夫曼矿物 This heat resistant paint utilizes SILLITIN V 85.
ZetaSperse® 3800 Dispersant Evonik Operations GmbH, BL Coating Additives ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation...voir plus ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation characteristics. voir moins Request Sample
V8 Pigment Concentrate for Silicate and Lime Paints, 50% (Formulation #W2947) Ferro Pigments Pigment concentrate of ultramarine blue for applications to high pH.
Was A-81 Aldehyde Resin Yueyang Keyuan Innovative Materials Co., Ltd. Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in co...voir plus Was A-81 Aldehyde Resin is a colorless or yellowish aldehyde polycondensation resin that is insoluble in water, but can dissolve in most organic solvents and paint/ink formulations. This product is commonly used for general paste grinding resin and in coating formulation. voir moins
Waterborne Acrylic Primer using HALOX 430 and HALOX 515 (Formulation #86ER) ICL Phosphate Specialty Water-based Acrylic Primer using HALOX® 430 & HALOX® 515
Nubirox 213 in SB 2K Epoxy-Polyamide Primer (Formulation #EPPA 12883) Ferro Pigments This SB 2K epoxy-polyamide primer features Nubirox 213.
Nubirox 302 in Solvent Based DTM Alkyd System (Formulation #AC 19630) Ferro Pigments This solvent based DTM alkyd system features Nubirox 302.
Nubirox 106 in WB 2K Epoxy-Polyamide Primer (Formulation #EPPAA 18954) Ferro Pigments This WB 2K Epoxy-Polyamide Primer features Nubirox 106.
Nubirox 106 in Water Based DTM Alkyd System (Formulation #AA 19668) Ferro Pigments This water based DTM alkyd system features Nubirox 106 & Nubirox FR-10.
Nubirox 302 in Water Based DTM Alkyd System (Formulation #AA 19670) Ferro Pigments This water based DTM alkyd system features Nubirox 302.
Pigment Concentrates for Water-Borne Systems - Bayferrox (Formulation #130F PR 101) Arkema Rheology & Specialty Additives This pigment concentrates for water-borne systems features Coadis™ 790.
TIB KAT® 623 TIB Chemicals TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers.
High Solids Phenolic Modified Medium Oil Alkyd Primer (Formulation #57-5703) ICL Phosphate Specialty High Solids Phenolic Medium Oil Alkyd Primer using HALOX® CW-291
ST-30 Macro Polymers Pvt. Ltd. ST-30 is a styrenated alkyd in a xylene formulation. This product is designed to provide high gloss, hardness, durability, water and oil resistance. It can be used in industrial finishes for metallic substrates such as quick-dry primers and enamels.
BR-5825I30 Bomar, formerly Dymax Oligomers & Coatings BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weath...voir plus BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weatherability. voir moins
RESYDROL® AY 466w/38WA Allnex Resydrol® AY 466W/38WA is a brown, opaque oxidatively drying acrylic modified alkyd resin as an aqueous emulsion. It is used as sole binder for the formulation of industrial topcoats which are suited for coating agricultural vehicles and construction mach...voir plus Resydrol® AY 466W/38WA is a brown, opaque oxidatively drying acrylic modified alkyd resin as an aqueous emulsion. It is used as sole binder for the formulation of industrial topcoats which are suited for coating agricultural vehicles and construction machinery. voir moins Request Sample
Maleic Acid Resin M-120 Ecopower Chemical Co., Ltd. Maleic Acid Resin M-120 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints.
Maleic Acid Resin M-130 Ecopower Chemical Co., Ltd. Maleic Acid Resin M-130 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints.
Maleic Acid Resin M-140 Ecopower Chemical Co., Ltd. Maleic Acid Resin M-140 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints.
Fujicure 5250 Sanho Chemical Co., Ltd. Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications.
Tohmide TXH-674B Sanho Chemical Co., Ltd. Tohmide TXH-674B is a modified polyaminoamide hardener in an amber liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.11. Tohmide TXH-674B is most commonly used in concrete coating formulation applications.
Pergut® S 130 Covestro (formerly Bayer MaterialScience) 科思创 Pergut® S 130 is a chlorinated rubber used as a binder for, among other things, adhesives. On account of its high polarity, Pergut® S 130 is especially suitable for the formulation of primers and key coats for rubber/metal bonds.
Pergut® S 170 Covestro (formerly Bayer MaterialScience) 科思创 Pergut® S 170 is a chlorinated rubber used as a binder for, among other things, adhesives. On account of its high polarity, Pergut® S 170 is especially suitable for the formulation of primers and key coats for rubber/metal bonds.
Kingcure T-642NA Sanho Chemical Co., Ltd. Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications.