UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Aluminium testing bases Rocholl GmbH – test specimens Chemical degreasing, turning, milling, grinding, deburring, drilling or sandblasting none are a problem for us. Ask for your individual requirements. By the way, we also offer TABER panels made of every type of base material.
Concrete testing bases Rocholl GmbH – test specimens With us any formula is possible through the gravimetrical measurement of ingredients and grain size. The dimensions can be modified by changing the mould which we make ourselves. Your desired surface can be achieved through grinding, brushing, sandblastin...voir plus With us any formula is possible through the gravimetrical measurement of ingredients and grain size. The dimensions can be modified by changing the mould which we make ourselves. Your desired surface can be achieved through grinding, brushing, sandblasting or cutting on any of our testing bases. voir moins
Fibre cement testing bases Rocholl GmbH – test specimens Also for fibre cement we are well equipped to satisfy your needs. We have various types of sheets on stock and will cut them to the requested size on site. If necessary, we can mill the surfaces.
Glass testing bases Rocholl GmbH – test specimens No matter what type of glass, what size or what edge treatment you need, we supply it. You can get untreated, sharp edged glass as well as slightly deburred or flatly ground edges. On request we mark the bath side of float glass with an engraver in a solv...voir plus No matter what type of glass, what size or what edge treatment you need, we supply it. You can get untreated, sharp edged glass as well as slightly deburred or flatly ground edges. On request we mark the bath side of float glass with an engraver in a solvent resistant manner and offer glass with a drill hole and sandblasted surfaces. voir moins
Metal testing bases Rocholl GmbH – test specimens Here we produce testing bases of various metals. As you already know, we work strictly according to your requirements. We have a large stock from which you can choose your preferred base material.
Plastic testing bases Rocholl GmbH – test specimens Our plastic testing bases are cut individually from various sheets. We have a well sorted stock in order to meet your needs within a short time. The most popular types in our stock are ABS, Polycarbonate, Polyethylene, PMMA, Polyoxymethylene, Polypropylen...voir plus Our plastic testing bases are cut individually from various sheets. We have a well sorted stock in order to meet your needs within a short time. The most popular types in our stock are ABS, Polycarbonate, Polyethylene, PMMA, Polyoxymethylene, Polypropylene, Polyester A-PET and PET-G, PTFE, Polyamide 6 and 6.6, FRP polyester based as well as epoxy based and more. voir moins
Stone testing bases Rocholl GmbH – test specimens We produce stone testing bases. You can choose the dimensions and the type of stone according to your requirements. We have various types of natural and artificial stone qualities on stock.
Test panels for PSA (adhesive tape) tests Rocholl GmbH – test specimens We supply all types of test panels for PSA tests. You have the choice of material and size. Whether you carry out your tests according to AFERA, PSTC or FINAT, here you will find the panel you need. Of course we can apply cut lines or drill holes.
Testing bases for automotive adhesives Rocholl GmbH – test specimens We offer cleaning and pre-treatment processes commonly used in the automotive industry on all our metal substrates. Additionally, we provide steel panels with automotive coatings in repair or in OEM quality.
Testing bases for dental adhesives Rocholl GmbH – test specimens We offer bovine incisors which are prepared for dental adhesive tests after removal of the flesh, root and nerves. Our supplier of fresh teeth and all of our own procedures of disinfection and handling meet the legal hygienic requirements of veterinary re...voir plus We offer bovine incisors which are prepared for dental adhesive tests after removal of the flesh, root and nerves. Our supplier of fresh teeth and all of our own procedures of disinfection and handling meet the legal hygienic requirements of veterinary restrictions. We are inspected and observed by the veterinary department and our European licence number for working with bovine material is DE 08 2 25 0001 14. Every batch of teeth is 100% tested and certified. Thus, we avoid any risk of infection by BSE or other diseases. voir moins
Testing bases for varnish & coatings Rocholl GmbH – test specimens We produce test panels of various metals and plastics. Holes can be drilled in all panels. The panels can be bare, pre-coated with a primer or pre-treated. Here again, you determine the size. We produce panels 100 x 100 mm for the TABER Tester out of any ...voir plus We produce test panels of various metals and plastics. Holes can be drilled in all panels. The panels can be bare, pre-coated with a primer or pre-treated. Here again, you determine the size. We produce panels 100 x 100 mm for the TABER Tester out of any materials: metal, wood, plastic, glass, etc. voir moins
Tiles testing bases Rocholl GmbH – test specimens We have a large variety of tiles in our product range. Whether you are looking for simple bathroom tiles or special biscuit tiles according to EN, we have them and we will cut them to the desired size.
Wood testing bases Rocholl GmbH – test specimens In our shop, we saw, plane, grind, drill and mill wood to attain perfect test surfaces. Natural cracks and knots in the wood are cut off during the production. Our employees are trained to recognize the direction of the annual rings. Our testing bases are...voir plus In our shop, we saw, plane, grind, drill and mill wood to attain perfect test surfaces. Natural cracks and knots in the wood are cut off during the production. Our employees are trained to recognize the direction of the annual rings. Our testing bases are produced with a defined direction of annual rings, if required. We offer beech wood test panels acc. to EN 205 or EN 304 as well as pine and spruce wood acc. to EN 927. voir moins
1/8" Compact PH/Temperature Probes Automaxion Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of ...voir plus Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of high profile companies now performing High Throughput Formulation using systems requiring an investment of up to $8 million, and worked with provider companies to demonstrate or improve their product performance. voir moins
ASC Automatic Sample Changer Anton Paar Viscosity & Rheology ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...voir plus ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. voir moins
FRS1600 Furnace Rheometer System Anton Paar Viscosity & Rheology FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...voir plus FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. voir moins
High Throughput Cocrystal Screening Automaxion Automaxion has developed technology to perform solvent drop grinding (SDG) for cocrystal screening (48 in parallel possible). It is all performed in low cost GC vials at the 20 mg scale, and dispensing, processing and measurement is possible without remov...voir plus Automaxion has developed technology to perform solvent drop grinding (SDG) for cocrystal screening (48 in parallel possible). It is all performed in low cost GC vials at the 20 mg scale, and dispensing, processing and measurement is possible without removing the sample from the vial. It is automation friendly, has no sample loss, no cleaning, and Direct FT-Raman possible. voir moins
High-Throughput Rheometer HTR 301 Anton Paar Viscosity & Rheology High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...voir plus High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. voir moins
Lovis 2000 M/ME Rolling-Ball Viscometer Anton Paar Viscosity & Rheology Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...voir plus Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. voir moins
MCR Rheometer Series Anton Paar Viscosity & Rheology MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...voir plus MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. voir moins
Q-FOG Cyclic Corrosion Tester Q-Lab, Inc. Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforc...voir plus Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation. voir moins
Q-SUN Xenon Test Chambers Q-Lab, Inc. Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different ...voir plus Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different models: the tabletop Xe-1, and full-sized Xe-2 and Xe-3. Each air-cooled tester features Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet, a variety of standard sample holders and a remarkably simple user interface available in five languages. voir moins
QUV Accelerated Weathering Tester Q-Lab, Inc. Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or we...voir plus Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. With thousands of testers in service worldwide, the QUV tester is the world's most widely used weathering tester. QUV testers are available in four different models: QUV/basic, QUV/se, QUV/spray, and QUV/cw. Each air-cooled tester featured Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet and/or USB, a variety of standard sample holders, automatic fault recognition and alarms, automatic shut-down timer, and a remarkably simple user interface available in five languages. voir moins
RheoLabQC Quality Control Rheometer Anton Paar Viscosity & Rheology RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...voir plus RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. voir moins
Rheometer Measuring Head Anton Paar Viscosity & Rheology Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...voir plus Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. voir moins