| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...voir plus UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. voir moins | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...voir plus UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. voir moins | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for...voir plus UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. voir moins | |
| SHIKOH™ UV-NS001 | Nippon Gohsei | SHIKOH™ UV-NS001 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring medium adhesion and good initial adhesion. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. | |
| SHIKOH™ UV-3630ID80 | Nippon Gohsei | SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and...voir plus SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3610ID80 | Nippon Gohsei | SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as ...voir plus SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3640PE80 | Nippon Gohsei | SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as we...voir plus SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-NS034 | Nippon Gohsei | SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesi...voir plus SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesives, masking tapes, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-NS054 | Nippon Gohsei | SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives,...voir plus SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...voir plus UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. voir moins | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...voir plus nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. voir moins | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...voir plus UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. voir moins | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...voir plus UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. voir moins | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...voir plus UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. voir moins | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...voir plus UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. voir moins | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...voir plus UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. voir moins | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...voir plus SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...voir plus SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...voir plus SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...voir plus SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3310B | Nippon Gohsei | SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and pri...voir plus SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. voir moins | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...voir plus SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...voir plus SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...voir plus SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. voir moins | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...voir plus SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. voir moins | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...voir plus SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...voir plus SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...voir plus SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...voir plus SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. voir moins | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...voir plus SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...voir plus SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3210EA | Nippon Gohsei | SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optica...voir plus SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. voir moins | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...voir plus SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. voir moins | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...voir plus SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...voir plus SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...voir plus SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...voir plus SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. voir moins | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...voir plus SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...voir plus SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. voir moins | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...voir plus BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. voir moins | |
| Uvacril R1 | Ichemco | Uvacril R1 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of 99-100%. Uvacril R1 is most commonly used in label production applications. | |
| Uvacril R2 | Ichemco | Uvacril R2 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99%. Uvacril R2 is most commonly used in removable and deep freeze label production applications. | |
| GENOMER* 6043/M22 | Rahn AG | GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesiv...voir plus GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| Uvacril M 25 | Ichemco | Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphi...voir plus Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphic production applications. voir moins | |
| Uvacril M 26 | Ichemco | Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic ...voir plus Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic production applications. voir moins | |
| GENOMER* 3143 | Rahn AG | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...voir plus BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. voir moins | |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...voir plus GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. voir moins | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...voir plus GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. voir moins | Request Sample |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive...voir plus PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. voir moins | |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...voir plus EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. voir moins | Request Sample |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| Syna S-06E | DKSH | Syna S-06E is an electronic-grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fiber cable cores, and other composite materials, giving an outstanding performance for UV resistance and anti-radi...voir plus Syna S-06E is an electronic-grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fiber cable cores, and other composite materials, giving an outstanding performance for UV resistance and anti-radiation properties. It is UV curable, thermally curable with anhydrides, has high TG up to 195ºC, Excellent yellowing resistance and good UV resistance, outstanding electrical insulation, low halogen and high purity, and low viscosity. voir moins | Request Sample |
| GENOMER* 3486 | Rahn AG | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...voir plus GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. voir moins | Request Sample |
| GENOCURE* MBB | Rahn AG | GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...voir plus GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. voir moins | Request Sample |
| GENOCURE* LBP | Rahn AG | GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...voir plus GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. voir moins | Request Sample |
| Novester 8511-73ST | Novaresine S.r.l | Novester 8511-73ST is an elastic unsaturated polyester resin designed primarily for use in wood primers and putties. This product is also recommended for UV-curable and powder coating applications. | |
| GENOMER* 5142 | Rahn AG | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...voir plus GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| GENOMER* 5161 | Rahn AG | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...voir plus GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...voir plus BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). voir moins | |
| GENOMER* 4293 | Rahn AG | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| GENOMER* 4383/W | Rahn AG | GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, ...voir plus GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, and good solvent resistance. This product may be cross-linked by used of UV-irradiation with a suitable initiator. GENOMER* 4383/W is recommended for wood and industrial coatings. voir moins | Request Sample |
| GENOMER* 6058 | Rahn AG | GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and v...voir plus GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and varnishes; wood coatings; screen inks; and plastic coatings. voir moins | Request Sample |
| GENOMER* 6050/TM | Rahn AG | GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and v...voir plus GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and varnishes; and letterpress inks. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. voir moins | Request Sample |
| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...voir plus ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. voir moins | Request Sample |
| Syna S-21 | DKSH | Syna S-21 is a distilled base epoxy resin for use in formulating UV-curable cycloaliphatic epoxide coatings systems. S-21 contributes to primary film properties. S-21 has both carboxylate and epoxy groups, with the potential for a fast cure. S-21 is widel...voir plus Syna S-21 is a distilled base epoxy resin for use in formulating UV-curable cycloaliphatic epoxide coatings systems. S-21 contributes to primary film properties. S-21 has both carboxylate and epoxy groups, with the potential for a fast cure. S-21 is widely used in the industry for the preparation of inks, resins, coatings, and encapsulation. voir moins | Request Sample |
| GENOMER* 6050/GP | Rahn AG | GENOMER* 6050/GP is a modified polyester resin in GPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and va...voir plus GENOMER* 6050/GP is a modified polyester resin in GPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and varnishes; and letterpress inks. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. voir moins | Request Sample |
| GENOMER* 6083/M22 | Rahn AG | GENOMER* 6083/M22 is an inert resin in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; plastic coatings;...voir plus GENOMER* 6083/M22 is an inert resin in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; overprint varnishes; plastic coatings; and wood and industrial coatings. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. voir moins | Request Sample |
| GENOMER* 6083/ETM | Rahn AG | GENOMER* 6083/ETM is an inert resin in TMP(EO)3TA for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks and varnishes; flexo inks and varnishes; s...voir plus GENOMER* 6083/ETM is an inert resin in TMP(EO)3TA for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks and varnishes; flexo inks and varnishes; screen inks and varnishes; and overprint varnishes. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. voir moins | Request Sample |
| GENOMER* 6083/HD | Rahn AG | GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, p...voir plus GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, plastic, and paper coatings; and pigment master batches. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| Epokukdo KDU-653 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is ge...voir plus Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653 depend on diluents, photo initiators, and additives. voir moins | |
| Epokukdo KDU-651 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is ge...voir plus Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651 depend on diluents, photo initiators and additives. voir moins | |
| Epokukdo KDU-651TP75 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...voir plus Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651TP75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651TP75 depend on diluents, photo initiators, and additives. voir moins | |
| Epokukdo KDU-653M90 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...voir plus Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653M90 depend on diluents, photo initiators, and additives. voir moins | |
| Epokukdo KDU-651M90 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...voir plus Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651M90 depend on diluents, photo initiators, and additives. voir moins | |
| Epokukdo KDU-652S75 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water res...voir plus Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-652S75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-652S75 depend on diluents, photo initiators, and additives. voir moins | |
| Epokukdo KDU-651T70 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...voir plus Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651T70 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651T70 depend on diluents, photo initiators, and additives. voir moins | |
| SB400 | Sartomer Americas | SB400 is an octofunctional acid based adhesion oligomer diluted with 30% of PGME for use in UV/LED and EB curing applications. | |
| Epokukdo KDU-657TH70 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester ...voir plus Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester film UV coating and P.C.B. Ink because of its good electric properties and excellent chemical resistance. Curing-speed and viscosity of KDU-657TH70 depend on diluents, photo initiators and additives. voir moins | |
| CNUVE150/80 | Sartomer Americas | CNUVE150/80 is a clear low viscosity, epoxy diacrylate, for use in UV and EB curing coatings inks and adhesives. It combines high flexibility, good chemical resistance and hardness. It is excellent for its adhesion properties. | |
| CN965 | Sartomer Americas | CN965 is a flexible difunctional aliphatic polyester urethane acrylate oligomer, supplied as the base oligomer for use in UV and EB curing coatings, inks and adhesives. Key properties include excellent impact resistance, adhesion, and pigment wetting. | |
| CN981 | Sartomer Americas | CN981 is a difunctional aliphatic polyester / ether urethane acrylate oligomer for use in UV and EB curing coatings, inks, and adhesives. This product has excellent balance flexibility/hardness, excellent abrasion resistance, good adhesion, and good pigme...voir plus CN981 is a difunctional aliphatic polyester / ether urethane acrylate oligomer for use in UV and EB curing coatings, inks, and adhesives. This product has excellent balance flexibility/hardness, excellent abrasion resistance, good adhesion, and good pigment wetting. voir moins | |
| CN966H90 | Sartomer Americas | CN966H90 is a flexible difunctional aliphatic polyester urethane acrylate oligomer, diluted in 2-(2-ethoxyethoxy)ethyl acrylate for use in UV and EB curing coatings and inks. It is particularly suited for use in pressure sensitive adhesives and laminating...voir plus CN966H90 is a flexible difunctional aliphatic polyester urethane acrylate oligomer, diluted in 2-(2-ethoxyethoxy)ethyl acrylate for use in UV and EB curing coatings and inks. It is particularly suited for use in pressure sensitive adhesives and laminating adhesives. voir moins | |
| BR-372 | Bomar, formerly Dymax Oligomers & Coatings | BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety of plastics, and can also be used in the manufacture of UV-curable...voir plus BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety of plastics, and can also be used in the manufacture of UV-curable fiberglass matrix resins. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-3747AE | Bomar, formerly Dymax Oligomers & Coatings | BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (PVC). This unique product adheres well to a variety of metals, glass, and plastics. It is also an excellent candidate for consideration in UV light-curable...voir plus BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (PVC). This unique product adheres well to a variety of metals, glass, and plastics. It is also an excellent candidate for consideration in UV light-curable PSA as a co-oligomer. voir moins | |
| CN925 | Sartomer Americas | CN925 is a low viscosity modified aliphatic urethane tetraacrylate for use in UV & EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, low viscosity, solvent resistance, and hardness. | |
| CN963B80 | Sartomer Americas | CN963B80 is a difunctional aliphatic polyester urethane acrylate oligomer, supplied in HDDA for use in UV and EB curing coatings, inks and adhesives. This product has excellent weathering characteristics, balance of tensile properties, and flexibility. | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| CN964A85 | Sartomer Americas | CN964A85 is a resilient difunctional aliphatic polyester urethane acrylate oligomer, diluted in TPGDA for use in UV and EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, medium tensile strength/high elongat...voir plus CN964A85 is a resilient difunctional aliphatic polyester urethane acrylate oligomer, diluted in TPGDA for use in UV and EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, medium tensile strength/high elongation, low viscosity, and high reactivity. voir moins | |
| BR-641D | Bomar, formerly Dymax Oligomers & Coatings | BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties t...voir plus BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene, and Polypropylene. voir moins | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable...voir plus BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. voir moins | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable...voir plus BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable...voir plus BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...voir plus BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesive...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| CN2003EU | Sartomer Americas | CN2003EU is a clear liquid modified epoxy acrylate for use in ultra violet and electron beam curing compositions. Key properties include high flexibility, excellent adhesion on metal and plastics, and low shrinkage. | |
| CN890 | Sartomer Americas | CN890 is a clear liquid multifunctional melamine acrylate for use in ultra violet and electron beam curing compositions. It offers the following key properties: excellent adhesion to plastics, scratch resistance, non yellowing, and durability. | |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...voir plus Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. voir moins |
