| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...voir plus EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. voir moins | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...voir plus Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. voir moins | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...voir plus Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. voir moins | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...voir plus Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. voir moins | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...voir plus Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. voir moins | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...voir plus Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | |
| Surfadol® 331 Pigment Dispersing Agent | ACME | Surfadol® 331 is a 80% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 8-11. Silicone free, APEO free. | |
| Surfadol® 333 Pigment Dispersing Agent | ACME | Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named...voir plus Surfadol® 333 is a 90% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free. Solvent-free type is named Surfadol® 333W. voir moins | |
| Surfadol® 333W Pigment Dispersing Agent | ACME | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME | Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...voir plus Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. voir moins | |
| Surfadol® 440 Surfactant | ACME | Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...voir plus Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. voir moins | |
| Surfadol® 465 Surfactant | ACME | Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This ...voir plus Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. voir moins | |
| Surfadol® 518 | ACME | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...voir plus Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 520 | ACME | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...voir plus Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 532 | ACME | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...voir plus Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 532B | ACME | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...voir plus Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a...voir plus Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a number of solvent cuts as well as powdered forms. It is silicone and APE-free. voir moins | |
| Surfadol® 541E Surfactant | ACME | Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...voir plus Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. voir moins | |
| Surfadol® 541H Surfactant | ACME | Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...voir plus Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. voir moins | |
| Surfadol® 541PA Surfactant | ACME | Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical app...voir plus Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. voir moins | |
| Surfadol® 550 | ACME | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...voir plus Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 550P | ACME | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...voir plus Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® DF-59 | ACME | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...voir plus Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. voir moins |
