| SIM6487.4 | Gelest, Incorporated | Widely used coupling agent for unsaturated polyester-fiberglass composites. Copolymerized with styrene in formation of sol-gel composites. | |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...voir plus Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. voir moins | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| Novester 8511-73ST | Novaresine S.r.l | Novester 8511-73ST is an elastic unsaturated polyester resin designed primarily for use in wood primers and putties. This product is also recommended for UV-curable and powder coating applications. | |
| Novapol U7208-63 | Novaresine S.r.l | Novapol U7208-63 is an unsaturated polyester resin that provides reduced viscosity and shrinkage, as well as deep penetration of porous surfaces. This product is ideal for use in marble applications, including polishes, reinforcing coatings, and sealants. | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...voir plus Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. voir moins | |
| TIB KAT® 815 | TIB Chemicals | TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%...voir plus TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%. voir moins | Request Sample |
| TIB KAT® 250 | TIB Chemicals | TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in...voir plus TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in production of alkyd resins. voir moins | Request Sample |
| Organosilane G312 | Dalian Onichem Co., Ltd. | Organosilane G312 is a glycidoxy (epoxy)-functional silane that is used as a coupling agent for unsaturated polyester-fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. It is also used as an adh...voir plus Organosilane G312 is a glycidoxy (epoxy)-functional silane that is used as a coupling agent for unsaturated polyester-fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. It is also used as an adhesion promoter in waterborne systems. voir moins | Request Sample |
| Propylene Glycol Tech Grade | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Propylene Glycol Tech Grade is a is an organic compound with the chemical formula C3H8O2. It has multiple applications for use in unsaturated polyester resin, engine coolant and antifreeze, hydraulic and break fluid, aircraft deicing fluid, heat transfer ...voir plus Propylene Glycol Tech Grade is a is an organic compound with the chemical formula C3H8O2. It has multiple applications for use in unsaturated polyester resin, engine coolant and antifreeze, hydraulic and break fluid, aircraft deicing fluid, heat transfer fluid, paints, coatings and liquid detergent. voir moins | |
| TIB KAT® 808 | TIB Chemicals | TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insolub...voir plus TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insoluble in water. voir moins | Request Sample |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...voir plus Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. voir moins | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...voir plus Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. voir moins | |
| Nyacol® APE3040 | Nyacol Nano Technology | Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromin...voir plus Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromine or chlorine and can be used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| Novapol U7101-70 | Novaresine S.r.l | Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated ...voir plus Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated with the resin are marked by high reactivity at lower temperatures and high compatibility with all marble surfaces. voir moins | |
| 63% DVB Monomer | Deltech Corporation | 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins wher...voir plus 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, insulting varnishes, and unsaturated polyesters. voir moins | |
| TIB KAT® K15 | TIB Chemicals | TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It...voir plus TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It shows high compatibility and miscibility with low polar reaction partners due to its special composition. voir moins | Request Sample |
| Organosilane G301 | Dalian Onichem Co., Ltd. | Organosilane G301 is a glycidoxy (epoxy) functional silane which boils at 290°C. It is a colorless and transparent liquid that is used as a coupling agent for unsaturated polyester- fiberglass composites, for polysulfide and polyurethane caulks and sealan...voir plus Organosilane G301 is a glycidoxy (epoxy) functional silane which boils at 290°C. It is a colorless and transparent liquid that is used as a coupling agent for unsaturated polyester- fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. Organosilane G301 is also used as an adhesion promoter in waterborne systems. voir moins | Request Sample |
| Silane Coupling Agent KH-172 | Zhejiang Feidian Chemical Co., Ltd. | KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many...voir plus KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture. voir moins | |
| 80% DVB Monomer | Deltech Corporation | 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resin...voir plus 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, and insulting varnishes. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF SE, Intermediates Division | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...voir plus N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). voir moins | |
| CLiQFLOW® 707 | CLiQ SwissTech (Netherlands) B.V. | CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resistance. The product is used in general industrial and heavy-duty non-aqueous paints as well as unsaturated polyester...voir plus CLiQFLOW® 707 is a thixotropic additive with a hydrogenated caster oil-base for non to low-polar solvent-based systems and solvent-free systems. A micronized powder, It gives off a strong shear thinning flow behavior with good flow, leveling and sag resistance. The product is used in general industrial and heavy-duty non-aqueous paints as well as unsaturated polyester putties, adhesives and sealants. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Tytanpol® R-310 | Grupa Azoty | Tytanpol® R-310 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium compounds (4.8% as Al2O3) and modified with hydrophilic organic compounds. TYTANPOL® R-310 is a specialty pigment that is particularly recommended for use in the production of decorative paper, laminated paper, pigmenting formaldehyde resins and their derivative products and unsaturated polyester...voir plus Tytanpol® R-310 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminium compounds (4.8% as Al2O3) and modified with hydrophilic organic compounds. TYTANPOL® R-310 is a specialty pigment that is particularly recommended for use in the production of decorative paper, laminated paper, pigmenting formaldehyde resins and their derivative products and unsaturated polyester resins. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Tytanpol® R-001 | Grupa Azoty | Tytanpol® R-001 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminum compounds (3% as Al2O3) and modified with hydrophilic organic compounds. TYTANPOL® R-001 is widely used and especially recommended for indoor paints, high-gloss printing inks, powder coatings, VC, plastisols, polyolefines, unsaturated polyesters, polyester...voir plus Tytanpol® R-001 is a white fine-milled powder made of titanium dioxide with a rutile crystallographic structure. It is nontoxic, non-flammable and chemically inactive. It has been subjected to surface treatment with aluminum compounds (3% as Al2O3) and modified with hydrophilic organic compounds. TYTANPOL® R-001 is widely used and especially recommended for indoor paints, high-gloss printing inks, powder coatings, VC, plastisols, polyolefines, unsaturated polyesters, polyester gel coats, vinyl floor lining, linoleum and sealing compounds. voir moins | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...voir plus Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. voir moins | |
| VT Monomer | Deltech Corporation | VT Monomer (Vinyl Toluene) is a reactive monomer which readily polymerizes to form a high clarity, colorless polymer with excellent electrical and physical properties. VT Monomer is a mixture of methylstyrene isomers with approximately 55% meta and 45% para isomer distribution. The monomer has chemical properties and polymerization behavior similar to styrene monomer. Applications include use in coatings, adhesives, films, insulating varnishes, unsaturated polyester...voir plus VT Monomer (Vinyl Toluene) is a reactive monomer which readily polymerizes to form a high clarity, colorless polymer with excellent electrical and physical properties. VT Monomer is a mixture of methylstyrene isomers with approximately 55% meta and 45% para isomer distribution. The monomer has chemical properties and polymerization behavior similar to styrene monomer. Applications include use in coatings, adhesives, films, insulating varnishes, unsaturated polyesters, and ion exchange resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| Novapol U7303-55 | Novaresine S.r.l | Novapol U7303-55 is an unsaturated orthophthalic resin, accelerated with cobalt. It provides good mechanical resistance, low volume loss, and rapid reactivity - especially with peroxide. This product is ideal for use in mastics for marble applications. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins | |
| Vinylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | Vinylmethyldimethoxysilane is a copolymer in vinyl resins. It is used for unsaturated polyesters and mercapto resins. | Request Sample |
| Deolink Methacryl TM-100 | DOG Deutsche Oelfabrik Gesellschaft für chemische Erzeugnisse mbH & Co. KG | Deolink Methacryl TM-100 is a coupling agent for unsaturated resins appearing as a clear yellow liquid. It promotes the reinforcement of thermoplastics and elastomers, and is used as a co-monomer in radical curing systems such as acrylics, polyesters, and...voir plus Deolink Methacryl TM-100 is a coupling agent for unsaturated resins appearing as a clear yellow liquid. It promotes the reinforcement of thermoplastics and elastomers, and is used as a co-monomer in radical curing systems such as acrylics, polyesters, and methacrylates. Deolink Methacryl TM-100 works as a bonding agent, improves the mechanical properties of polyester composites that contain inorganic filler, can be used to cross-link polyethylene with co-additives. It can also be used as a copolymer with acrylic or methacrylic monomers, finding application in coatings and adhesives. voir moins | |
| KOMERATE D003M | Green Chemical Co., Ltd. | KOMERATE D003M is difunctional methacrylate. It offers excellent compatibility with unsaturated polyesters for gel-coats, and chemical fixings. | |
| N,N-DI-(2-hydroxyethyl) aniline | BASF SE, Intermediates Division | N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions. | |
| N,N-Diisopropanol-P-toluidine | BASF SE, Intermediates Division | N,N-Diisopropanol-P-toluidine is an accelerator for radical initiated polymerization of unsaturated polyesters, Catalyst for epoxy reactions. Coatings technology for composite production. | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| Vinyltrimethoxysilane | Dalian Onichem Co., Ltd. | Vinyltrimethoxysilane is a cross-linking agent for PE. This product is used as a moisture scavenger as well as a coupling agent for unsaturated polyesters. | Request Sample |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated...voir plus Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". voir moins | |
| TIB KAT® 220 | TIB Chemicals | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | Request Sample |
| TMP (Hydro)® Trimethylol-propane | BASF SE, Intermediates Division | TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different typ...voir plus TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different types of alkyds and branched polyesters, it is easily esterified or transest. Alkyds and polyesters based on trimethylol-propane are suitable for solventborne paints (stoving enamels, two-component paints, can- & coil coating) and for waterborne paints. voir moins | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...voir plus Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. voir moins | |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyester...voir plus SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. voir moins | |
| HDK® N20 | Wacker Chemie AG | HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in el...voir plus HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders. voir moins | |
| PMS Monomer | Deltech Corporation | PMS Monomer (para-Methylstyrene) has chemical properties and polymerization behavior similar to both vinyltoluene and styrene monomers. PMS Monomer is a suggested as a monomer replacement for vinyltoluene and styrene monomers. It has solvent compatibility with acetone, carbon tetrachloride, benzene, N-heptane and ethanol. It finds application in coatings, adhesives, films, insulating varnishes, unsaturated polyester...voir plus PMS Monomer (para-Methylstyrene) has chemical properties and polymerization behavior similar to both vinyltoluene and styrene monomers. PMS Monomer is a suggested as a monomer replacement for vinyltoluene and styrene monomers. It has solvent compatibility with acetone, carbon tetrachloride, benzene, N-heptane and ethanol. It finds application in coatings, adhesives, films, insulating varnishes, unsaturated polyesters, and ion exchange resins. voir moins | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyester...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...voir plus Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. voir moins | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...voir plus EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. voir moins | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyester...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Pripol 2030 Dimerdiol | Cargill Industrial Specialties | Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical re...voir plus Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical resistance. voir moins | |
| Maleic Anhydride | Thirumalai Chemicals Ltd | Maleic Anhydride is an organic acid anhydride that is used in the product of unsatured polyester and alkyd resins that are applied to paints and coatings. It can also be used to improve coating quality in lacquers and vinyl copolymers used in adhesives. | |
| TBS Monomer | Deltech Corporation | TBS Monomer (tertiary-butyl Styrene) is a versatile substitute for styrene monomer with improved properties and fewer handling restrictions. From a performance standpoint, TBS has low volume shrinkage on polymerization, a high affinity for oils, high solvent receptivity and improved water resistance of copolymers. From an environmental standpoint, TBS has a low vapor pressure and high flash point which reduces emissions from storage or handling and reduces the flammability hazard. Applications include use in coatings, adhesives, films, insulating varnishes, unsaturated polyester...voir plus TBS Monomer (tertiary-butyl Styrene) is a versatile substitute for styrene monomer with improved properties and fewer handling restrictions. From a performance standpoint, TBS has low volume shrinkage on polymerization, a high affinity for oils, high solvent receptivity and improved water resistance of copolymers. From an environmental standpoint, TBS has a low vapor pressure and high flash point which reduces emissions from storage or handling and reduces the flammability hazard. Applications include use in coatings, adhesives, films, insulating varnishes, unsaturated polyesters, and ion exchange resins. voir moins | |
| SONGSORB® 3280 | Songwon International AG | SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyester...voir plus SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies and urethanes, oil alkyds and thermosetting acrylic enamels. voir moins | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyester...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyester...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins |
