| ALBAQUA 8L | Alba Aluminiu | ALBAQUA 8L is a water-dilutable leafing standard aluminum paste with super finesse. It is recommended for paper coatings, spray cans and printing inks. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...voir plus PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. voir moins | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...voir plus PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. voir moins | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...voir plus PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. voir moins | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...voir plus PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. voir moins | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...voir plus PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. voir moins | |
| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...voir plus BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. voir moins | Request Sample |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...voir plus BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) voir moins | Request Sample |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | Request Sample |
| Blendex PVC 10 | Ichemco | Blendex PVC 10 is a heat-sealable, transparent, solvent-based printing lacquer. This product is most commonly used to improve scrubbing and water resistance in paper, PVC, and PET coating applications. | |
| Blendex S 79 | Ichemco | Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applic...voir plus Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applications. voir moins | |
| Blendex S 79 T | Ichemco | Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transf...voir plus Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transfer coating applications. voir moins | |
| Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...voir plus Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. voir moins | |
| BTC-OG1376 | DKSH | BTC-OG1376 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, target coatings, and certain aerosol paints. | Request Sample |
| BYD-1007 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyureth...voir plus BYD-1007, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in surface coatings for paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| BYD-1308 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane...voir plus BYD-1308, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a polish for card paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...voir plus BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| BYD-1348 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...voir plus BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. voir moins | |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...voir plus BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. voir moins | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....voir plus BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. voir moins | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...voir plus BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. voir moins | |
| BYD7201 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation....voir plus BYD7201, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a plastic binder for PVC, PS, fabrics, wood, paper, and cement applications. This product offers strong cohesive strength and fast film formation. Its pH value is 5.0 +/- 1.0. voir moins | |
| BYD7231 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesi...voir plus BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH value is 5.0 +/- 1.0. voir moins | |
| Cinergi™ 2100 E | Lawter | Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has...voir plus Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has application in offset, sheet-fed, web-fed and letterpress printing techniques. voir moins | |
| Cinergi™ 2239 E | Lawter | Cinergi™ 2239 E is a gel varnish that is fast setting with a high gloss. It has good water as well as heat and shear resistance qualities and finds uses in offset, quickset, sheet-fed and gloss offset inks. | |
| Cinergi™ 4170 E | Lawter | Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-...voir plus Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-fed and 100% NV inks as well as in overprint varnishes. voir moins | |
| CN UVA421 | Sartomer Americas | CN UVA421 is a low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. It can be used as the sole binder or with the addition of monomers. Alternatively, it can be used in combination with other oligom...voir plus CN UVA421 is a low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. It can be used as the sole binder or with the addition of monomers. Alternatively, it can be used in combination with other oligomers to improve the reactivity. voir moins | |
| CN104 | Sartomer Americas | CN104 is an epoxy acrylate oligomer for use in UV and EB curing composition. Its high reactivity, chemical resistance and film hardness make it a suitable choice for use in topcoats and sealers for paper, wood, metal decorating and for ink formulations. | |
| CN104B80 | Sartomer Americas | CN104B80 is the epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) hexanediol diacrylate SR238 for use in UV and EB curing compositions. Its high reactivity, chemical resistance, film hardness and flexibility are key properties which ...voir plus CN104B80 is the epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) hexanediol diacrylate SR238 for use in UV and EB curing compositions. Its high reactivity, chemical resistance, film hardness and flexibility are key properties which make it a useful component in topcoats and sealers. voir moins | |
| Coronate® 2067 | Tosoh Corporation | Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it c...voir plus Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. voir moins | |
| Coronate® 2096 | Tosoh Corporation | Coronate® 2096 is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HK | Tosoh Corporation | Coronate® HK is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HL | Tosoh Corporation | Coronate® HL is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HX | Tosoh Corporation | Coronate® HX is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HX-T | Tosoh Corporation | Coronate® HX-T is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HXLV | Tosoh Corporation | Coronate® HXLV is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® HXR | Tosoh Corporation | Coronate® HXR is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications. | |
| Coronate® L | Tosoh Corporation | Coronate® L, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can ...voir plus Coronate® L, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. voir moins | |
| Coronate® L-45E | Tosoh Corporation | Coronate® L-45E, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it ...voir plus Coronate® L-45E, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. voir moins | |
| Coronate® L-55E | Tosoh Corporation | Coronate® L-55E, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it ...voir plus Coronate® L-55E, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. voir moins | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...voir plus DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. voir moins | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...voir plus DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. voir moins | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...voir plus DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. voir moins | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| DOUBLEMER® 127-100 | DBC Europe GmbH | DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/...voir plus DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. voir moins | |
| DOUBLEMER® 127-GP15 | DBC Europe GmbH | DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...voir plus DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. voir moins | |
| DOUBLEMER® 127-TP20 | DBC Europe GmbH | DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...voir plus DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. voir moins | |
| DOUBLEMER® 186 | DBC Europe GmbH | DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment...voir plus DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling and adhesion. This product is recommended for use in: clear coatings for paper, overprint varnishes, wood top coat with smooth surface, ink binder with good wetting property and adhesive applications. voir moins | |
| DOUBLEMER® 193A-TF | DBC Europe GmbH | DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photo...voir plus DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photoimageable solder ink. DOUBLEMER® 193A-TF is toluene free. voir moins | |
| DOUBLEMER® 236 | DBC Europe GmbH | DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or elect...voir plus DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion to metals, plastics and papers. Formulated UV/EB curable products containing DOUBLEMER® 236 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommened for use in: wet lithographic inks for paper, plastics and metals; adhesion promoter for coatings on metals, plastics and paper; lithographic overprint varnishes; and post-formable inks. voir moins | |
| EBECRYL® 600/35 OT | Allnex | EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exp...voir plus EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins. voir moins | Request Sample |
| EPOCROS™ K-2010E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & hea...voir plus EPOCROS™ K-2010E is a soft, VOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It acts as an adhesion promoter and a waterborne crosslinking agent. It It offers film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment. It also offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. EPOCROS™ K-2010E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. voir moins | Request Sample |
| EPOCROS™ K-2020E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-12...voir plus EPOCROS™ K-2020E is a VOC-free adhesion promoter and a waterborne crosslinking agent based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers film properties, low toxicity, fast drying along with improved water- and heat resistance. It possesses a controllable appearance by adjusting glass transition temperature. It has a long pot life for one packaging. It shows excellent adhesion particularly to polyester such as PET. Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. voir moins | Request Sample |
| EPOCROS™ K-2035E | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat ...voir plus EPOCROS™ K-2035E acts as an adhesion promoter and a waterborne crosslinking agent. It is a hard, VOC-free styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ K-2035E is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. voir moins | Request Sample |
| EPOCROS™ WS-300 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-300 is a VOC-free adhesion promoter and waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows ex...voir plus EPOCROS™ WS-300 is a VOC-free adhesion promoter and waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). It exhibits controllable appearance by glass transition temperature adjustment and crosslinking reaction at low temperature (80-120°C) with no by-product. It offers high reactivity with carboxyl groups and performance expression with even small addition. It has a long pot life for one packaging. EPOCROS™ WS-300 is designed for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. voir moins | Request Sample |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It e...voir plus EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. voir moins | Request Sample |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...voir plus EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. voir moins | Request Sample |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | Request Sample |
| Epokukdo YDB-400 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400H | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T60 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400TE70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epoxy Acrylate SE 145 | Soltech Ltd | Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as pap...voir plus Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as paper coatings, wood coatings, wood sealers, and laminating adhesives. Epoxy Acrylate SE 145 is 75% polymer solid by weight with a viscosity of 15,000-35,000 at 25℃. voir moins | |
| Epoxy Acrylate SE 1500 | Soltech Ltd | Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic i...voir plus Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic inks, screen inks, clear coatings for paper, top coats for wood, and overprint finishes. Epoxy Acrylate SE 1500 is 100% polymer solid by weight with a viscosity of 900-1,500 at 60℃. voir moins | |
| Epoxy Acrylate SE 1701 | Soltech Ltd | Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings...voir plus Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1701 is 100% polymer solid by weight with a viscosity of 6,000-9,000 at 25℃. voir moins | |
| Epoxy Acrylate SE 1702 | Soltech Ltd | Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in app...voir plus Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1702 is 100% polymer solid by weight with a viscosity of 4,000-6,000 at 60℃. voir moins | |
| Epoxy Acrylate SE 1703 | Soltech Ltd | Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applicati...voir plus Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applications such as clear paper coatings, clear wood coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1703 is 100% polymer solid by weight with a viscosity of 2,500-4,000 at 60℃. voir moins | |
| GENOMER* 2252/TM20 | Rahn AG | GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP20 | Rahn AG | GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP30 | Rahn AG | GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP40 | Rahn AG | GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2259 | Rahn AG | GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...voir plus GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. voir moins | Request Sample |
| GENOMER* 2263 | Rahn AG | GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, scr...voir plus GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, screen inks and varnishes, and wood plastic, and paper coatings. voir moins | Request Sample |
| GENOMER* 2280 | Rahn AG | GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...voir plus GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. voir moins | Request Sample |
| GENOMER* 2281 | Rahn AG | GENOMER* 2281 is a modified bisphenol A epoxy acrylate. With its main features compared to straight bisphenol-A epoxy acrylates, GENOMER* 2281 offers an excellent balance of properties like high reactivity, hardness, flexibility and toughness, and provide...voir plus GENOMER* 2281 is a modified bisphenol A epoxy acrylate. With its main features compared to straight bisphenol-A epoxy acrylates, GENOMER* 2281 offers an excellent balance of properties like high reactivity, hardness, flexibility and toughness, and provides good adhesion. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 3135 | Rahn AG | GENOMER* 3135 exhibiting excellent elongation and flexibility it can be used to improve flexibility in inks and coatings or used to increase modulus, strength and elongation in 3D printed products. GENOMER* 3135 has with 65% a high bio-renewable content. | Request Sample |
| GENOMER* 3143 | Rahn AG | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOMER* 4293 | Rahn AG | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...voir plus GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. voir moins | Request Sample |
| GENOMER* 4690 | Rahn AG | GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems whe...voir plus GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. This product is specifically recommended for use in the following applications: hard coats on plastic; top coats on wood; and coatings on paper, board, wood and plastics. voir moins | Request Sample |
| GENOMER* 4691 | Rahn AG | GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. | Request Sample |
| GENOMER* 5142 | Rahn AG | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...voir plus GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| GENOMER* 5161 | Rahn AG | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...voir plus GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| GENOMER* 5275 | Rahn AG | GENOMER* 5275 is an acrylated oligoamine resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: coatings for wood, paper and board; screen inks and varnishes; letterpress...voir plus GENOMER* 5275 is an acrylated oligoamine resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: coatings for wood, paper and board; screen inks and varnishes; letterpress inks; flexo inks and varnishes; and industrial coatings and adhesives. It combines high reactivity with good adhesion onto various substances. voir moins | Request Sample |
| GENOMER* 6083/HD | Rahn AG | GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, p...voir plus GENOMER* 6083/HD is an inert resin in HDDA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: letterpress inks; flexo inks and varnishes; screen inks and varnishes; wood, plastic, and paper coatings; and pigment master batches. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...voir plus Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. voir moins | |
| Hanwha EL-102 | Hanwha Chemical Corporation | Hanwha EL-102 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EL-103 | Hanwha Chemical Corporation | Hanwha EL-103 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EM-2070 | Hanwha Chemical Corporation | Hanwha EM-2070 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with a low degree of sedimentation. It is well suited for the use in producing tarpulins, flooring products and for high speed coatings or fillers. | |
| Hanwha EM-3090 | Hanwha Chemical Corporation | Hanwha EM-3090 is a high density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding thermal and viscosity stability. It is well suited for the use in producing wallpapers, sealants, tarpaulins and eathers. | |
| Hanwha KH-31S | Hanwha Chemical Corporation | Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other pro...voir plus Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KH-60 | Hanwha Chemical Corporation | Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low...voir plus Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KL-31 | Hanwha Chemical Corporation | Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature ...voir plus Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature melting foams. voir moins | |
| Hanwha KL-701 | Hanwha Chemical Corporation | Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temper...voir plus Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KM-31 | Hanwha Chemical Corporation | Hanwha KM-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and erasers. | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...voir plus HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. voir moins | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...voir plus HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. voir moins | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...voir plus HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. voir moins |
