UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
1,2-Dimethylimidazole, Lupragen DMI BASF SE, Intermediates Division 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes.
1,3-Diaminopropane BASF SE, Intermediates Division 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives.
1,4-Butanediol (1,4-BDO) DCC (Dairen Chemical Corp.) 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...voir plus 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. voir moins
1,4-Butanediol, BDO BASF SE, Intermediates Division 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins
1,4-Cyclohexane dimethanol divinyl ether, CHDM di BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble.
1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins
1,5-Pentanediol (1,5-PDL) UBE Chemical Europe 1,5-pentanediol is used as an intermediate for the production of polyesterpolyols for polyurethanes, adhesives, plasticizers, inkjet inks and for manufacturing pharmaceuticals and agrochemicals.
1,5-Pentanediol, PDO BASF SE, Intermediates Division 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins
1,6-Hexanediol Perstorp 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications.
1,6-Hexanediol (1,6-HDL) UBE Chemical Europe 1,6-Hexanediol is a valuable intermediate used in the synthesis of specialty chemicals and has applications in manufacturing a variety of polymers, such as polyurethanes, polyesters, and polycarbonatediols. The configuration of 1,6-hexanediol, which conta...voir plus 1,6-Hexanediol is a valuable intermediate used in the synthesis of specialty chemicals and has applications in manufacturing a variety of polymers, such as polyurethanes, polyesters, and polycarbonatediols. The configuration of 1,6-hexanediol, which contains terminally located hydroxyl groups, results in rapid and simultaneous reactions in the formation of lnumerous di-substituted products. voir moins
1,6-Hexanediol HDO® BASF SE, Intermediates Division 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 BASF SE, Intermediates Division 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins
1,8-Naphthalic Anhydride Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 1,8-Naphthalic Anhydride is an important raw material to synthesize perylene dyes, pigments, fluorescent, high performance resin and film. It is a pale yellow acicular crystal.
1,8-Naphthostyril Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 1,8-Naphthostyril is an intermediate to synthesize vat dyes and organic pigments. It is a uniform light yellow powder with a melting point at 173°C.
1-Vinylimidazol, VIM BASF SE, Intermediates Division 1-Vinylimidazol, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on ...voir plus 1-Vinylimidazol, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins
12-Hydroxy Stearic Acid (12-HSA) Castor International BV 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...voir plus 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. voir moins
2-(2-Aminoethoxy) ethanol BASF SE, Intermediates Division 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings.
2-Ethyl-4-Methylimidazole BASF SE, Intermediates Division 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes.
2-Ethylhexanoic Acid, 2-EHA BASF SE, Intermediates Division 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins
2-Ethylhexylvinylether, EHVE BASF SE, Intermediates Division 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins
2-Ethylimidazole BASF SE, Intermediates Division 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes.
2-Mercaptoethanol BASF SE, Intermediates Division 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings.
2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...voir plus 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. voir moins
2-Methylimidazole BASF SE, Intermediates Division 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes.
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan BASF SE, Intermediates Division 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins
3,4,9,10-Perylenetetracarboxylic Dianhydride Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 3,4 9,10-Perylenetetracarboxylic Dianhydride is an important intermediate to synthesize perylene dyes and pigments. It is a bright red uniform powder with a melting point >300°C.
3,5-Xylidine Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 3,5-Xylidine is a colorless or light yellow liquid that is an intermediate for dyes, pigments and pharmaceuticals.
3-(Cyclohexylamino) propylamine BASF SE, Intermediates Division 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins
3-(Dimethylamino) propylamine BASF SE, Intermediates Division 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings.
3-Amino Propyl Vinyl Ether, APVE BASF SE, Intermediates Division 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal,...voir plus 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal, ion exchange resins, purification of waste water, flocculation, biomedical and pharmaceutical application. voir moins
Request Sample 3-Chloropropylmethyldimethoxysilane Dalian Onichem Co., Ltd. 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties,...voir plus 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropylmethyldimethoxysilane is also the raw materials for other Organo-functional silanes with methyldimethoxy. voir moins
Request Sample 3-Chloropropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as c...voir plus 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltriethoxysilane is also the key intermediate for other Organo-functional silanes with triethoxy. voir moins
Request Sample 3-Chloropropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimetho...voir plus 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimethoxysilane is also a key intermediate for the preparation of a variety of amino-, mercapto- and methacryloyloxyorganosilanes which are used as silane coupling agents. voir moins
Request Sample 3-Methacryloxypropylmethyldimethoxysilane Dalian Onichem Co., Ltd. 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics.
Request Sample 3-Methacryloxypropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics.
4,4'-Diaminodicyclo-hexylmethane BASF SE, Intermediates Division 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins
4,4'-Methylenedianiline, MDA BASF SE, Intermediates Division 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins
4,7,10-Trioxatridecan- 1,13-diamine BASF SE, Intermediates Division 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins
4,9-Dioxadodecan- 1,12-diamine BASF SE, Intermediates Division 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins
4-Hydroxybutyl vinyl ether (HBVE) BASF SE, Intermediates Division 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins
4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt is a straw yellow white uniform powder that is an important material to synthesize vat dyes and pigments.
63% DVB Monomer Deltech Corporation 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins wher...voir plus 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, insulting varnishes, and unsaturated polyesters. voir moins
80% DVB Monomer Deltech Corporation 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resin...voir plus 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, and insulting varnishes. voir moins
Request Sample AAEM DKSH AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...voir plus AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. voir moins
ALKOPON® NS Oxiteno ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the ...voir plus ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the main surfactant used as a detergent and foaming agent in toothpaste formulas. Due to its higher Krafft point compared to ether sulfates, it is an excellent choice for pearled formulations and cream cleansers. This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand dishwashing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. ALKOPON® NS is also used in polymerization of PVC, acrylic resin, vinyl acetates, acrylates, methacrylates, styrene, butadiene, etc. voir moins
Request Sample AOI-BP™ Showa Denko K.K. AOI-BP™ is an acrylate monomer with blocked‐isocyanate (blocked-NCO) group. AOI‐BP™ is deblocked by heat. This makes AOI‐BP™ is suitable for water based compositions because the NCO group is protected by blocking agent (N,N‐dimethylpyrazole).
Request Sample AOI-VM™ Showa Denko K.K. AOI‐VM™ is an acrylate monomer with isocyanate (NCO) group. This compound is known as KarenzAOI which manufactured by batch process. but Showa Denko succeeded to establish its brand new continuous production process of AOI‐VM in large scale, which enables...voir plus AOI‐VM™ is an acrylate monomer with isocyanate (NCO) group. This compound is known as KarenzAOI which manufactured by batch process. but Showa Denko succeeded to establish its brand new continuous production process of AOI‐VM in large scale, which enables to offer this new product grade in affordable price. VM standing for versatile monomer, for industrial application. voir moins
Adipic Acid Penpet Petrochemical Trading GmbH Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...voir plus Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. voir moins
Alinco™ M-25 Linseed Oil ADM Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...voir plus Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Q Linseed Oil ADM Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ X Linseed Oil ADM Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Y Linseed Oil ADM Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z Linseed Oil ADM Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-1 Linseed Oil ADM Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-2 Linseed Oil ADM Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-3 Linseed Oil ADM Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-4 Linseed Oil ADM Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-5 Linseed Oil ADM Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z-6 Linseed Oil ADM Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alinco™ Z/2-Z/3 Linseed Oil ADM Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...voir plus Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins
Alkoxylated 2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...voir plus Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. voir moins
Alpha-Naphthaldehyde McGean-Rohco, Inc. Alpha-Naphthaldehyde is an intermediate used in the manufacturing of Tin and Tin/Lead Electroplating products.
Amino C Acid Hainan Zhongxin Chemical Co., Ltd. Amino C Acid is a grey powder with the molecular formula of C10H9NO6S2. It has an amino content of between 70 - 80 % minimum and an HPLC purity of 97%. Amino C Acid is primarily used as an intermediate in the production of reactive and direct dyes.
Ammonia Achema Ammonia (NH3) is one of the most important products in chemical industry used as a feedstock for nitric acid, ammonium salts, nitrates (nitric acid salts), nitrogen fertilizers, explosives, paints and pharmaceutical products production. It is a colorless ...voir plus Ammonia (NH3) is one of the most important products in chemical industry used as a feedstock for nitric acid, ammonium salts, nitrates (nitric acid salts), nitrogen fertilizers, explosives, paints and pharmaceutical products production. It is a colorless gas and is considered to be flammable. voir moins
Ammonia Solution 24.5% Büfa Chemikalien GmbH & Co.KG Ammonia Solution 24.5% (Ammoniaklösung, Ammoniakwasser, Ammoniaklauge, kaustisches Ammoniak, Salmiakgeist, Hirschhorngeist. Ätzammoniak, Ammoniumhydrat) is a colorless liquid with an ammonia-like odor.
Ammonium Hydrogen Difluoride Büfa Chemikalien GmbH & Co.KG Ammonium Hydrogen Difluoride (Ammoniumbifluorid, Ambi) comes in the form of white flakes with a pungent odor.
Request Sample Ancamine® R 215 Evonik Operations GmbH, BL Crosslinkers Ancamine® R 215 is an amine based hardener for epoxy systems. It is a colourless low viscosity liquid with a faint amine odor.
BEPD Perstorp BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...voir plus BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. voir moins
BRB Siloen® SMA 286 BRB International BV BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...voir plus BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. voir moins
Basic Chromic Chloride Powder McGean-Rohco, Inc. Basic Chromic Chloride Powder is a green powder. It is used as an intermediate in the manufacture of chromium compounds, vapor, chromium plating, and waterproofing compounds. It is also used as a mordant in textile dyeing and as a cross linking agent.
Benzyl Alcohol Büfa Chemikalien GmbH & Co.KG Benzyl Alcohol (Phenylmethanol, Phenylcarbinol, E 1519, BnOH) is a colorless liquid with a slightly aromatic odor.
Benzylamine BASF SE, Intermediates Division Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels.
Bis-MPA™ Perstorp Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications.
Bisomer® BDDMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins
Bisomer® C13MA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...voir plus Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. voir moins
Bisomer® CL HEMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins
Bisomer® DALP GEO Specialty Chemicals, Inc., Paints & Coatings Group Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...voir plus Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. voir moins
Bisomer® DEGDMA HI GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins
Bisomer® EP 100 DMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...voir plus Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins
Bisomer® EP 150 DMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...voir plus Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins
Bisomer® HEMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of < 0.2%, an assay of > 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins
Bisomer® HEMA HP GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins
Bisomer® HPMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins
Bisomer® IDMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...voir plus Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. voir moins
Bisomer® IPGMA TG GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® IPGMA TG (isopropylideneglycerol methacrylate) is a low viscosity, low odour methacrylate monomer. It is bio-based, not classified as a VOC and risk and hazard label-free. It can be used as a reactive diluent or as a co-monomer in acrylic resins.
Bisomer® LMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins
Bisomer® MPEG 350 MA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...voir plus Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). voir moins
Bisomer® MPEG 550 MA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...voir plus Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. voir moins
Bisomer® PEA 6 GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...voir plus Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. voir moins
Bisomer® PEG 200 DMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins
Bisomer® PEM6 LD GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...voir plus Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). voir moins
Bisomer® PEM63P HD GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, ...voir plus Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, an acid number of 0.3mg KOH/g max., and a hydroxyl value of 100-120mgKOH/g. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticizing properties when incorporated into polymers. Due to the positioning of its hydrophilic and hydrophobic components, Bisomer® PEM63P HD is ideal in the preparation of emulsion polymers for use in pigment dispersing resins and polyurethane dispersions (PUDs). Bisomer® PEM63P HD is an ideal candidate as a polymerisable surfactant in associative thickeners. voir moins
Bisomer® PPA 6 GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins
Bisomer® PPM5 HI GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PPM5 HI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 HI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer® PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins
Bisomer® PPM5 LI GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins
Bisomer® S10 W GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecu...voir plus Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecular weight of 1080g/mol, and an water content of 49-51%. It is water soluble and contains approximately 23 EO units within the chain. Bisomer® S10 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax -like solid. voir moins
Bisomer® S20 W GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) ...voir plus Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) content of 0.22-0.28%, and an acidity - methacrylic acid of 0.1% max. Bisomer® S20 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax-like solid. voir moins
Bisomer® TEGDMA GEO Specialty Chemicals, Inc., Paints & Coatings Group Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins
Boltorn™ P1000 Perstorp Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...voir plus Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. voir moins
Brassylic Acid (DC13T) Cathay Industrial Biotechnology Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high ...voir plus Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt adhesives, and more. voir moins