| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...voir plus MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. voir moins | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. voir moins | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. voir moins | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. voir moins | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...voir plus MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. voir moins | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...voir plus MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. voir moins | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...voir plus MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. voir moins | |
| Ongronat® 1080 | BorsodChem Rt. | Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It feat...voir plus Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It features excellent adhesion, high gloss, and durability. voir moins | |
| Ongronat® 1100 | BorsodChem Rt. | Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhe...voir plus Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhesion, and high gloss. voir moins | |
| Ongronat® 1101 | BorsodChem Rt. | Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adh...voir plus Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adhesives and sealants. This product features a slow curing speed and low reactivity. voir moins | |
| Ongronat® 3600 | BorsodChem Rt. | Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, che...voir plus Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, chemical- and abrasion resistance. It is very flexible, strong and durable. voir moins | |
| Ongronat® CO 2170 | BorsodChem Rt. | Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product feature...voir plus Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features slower curing speed and a longer pot life. voir moins | |
| Ongronat® CO 4050 | BorsodChem Rt. | Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be use...voir plus Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be used in construction adhesives, sealants and coatings. This product features excellent adhesion and good mechanical properties. voir moins | |
| Ongronat® CO 4070 | BorsodChem Rt. | Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insula...voir plus Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insulation and good flowability. voir moins | |
| Ongronat® CO 4150 | BorsodChem Rt. | Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting propertie...voir plus Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting properties and good adhesion capability. voir moins | |
| Ongronat® CO 5700 | BorsodChem Rt. | Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precip...voir plus Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precipitates. It can be used as a construction adhesive. voir moins | |
| Ongronat® CO 5750 | BorsodChem Rt. | Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipita...voir plus Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipitates. It can be used as a construction adhesive. This product features high resilience bonding and good elongation properties. voir moins | |
| Ongronat® TR 4025 | BorsodChem Rt. | Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport indu...voir plus Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport industry. This product has high durability and is very heat-resistant. voir moins | |
| Polurene MD 60 AB | S.A.P.I.C.I. SpA | Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...voir plus Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. voir moins | |
| Polurene MD 70 AE | S.A.P.I.C.I. SpA | Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good b...voir plus Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good brightness. It can be used in 1K barrier coatings for wood with high oil content. voir moins | |
| Polurgreen M 570 | S.A.P.I.C.I. SpA | Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems ...voir plus Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems with high solids content. It contains less than .5% TDI isocyanates. voir moins | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Suprasec® 1007 | Huntsman Polyurethanes EMEAI | Suprasec® 1007 is a prepolymerised diphenyl methane diisocyanate (MDI) for the formulation of one component (1k) injection grouting and flexible foam applications. | |
| Suprasec® 1306 | Huntsman Polyurethanes EMEAI | Suprasec® 1306 is a 4,4' diphenylmethane diisocyanate (MDI). It is a light coloured solid at ambient temperature. This product can be supplied in bulk tankers as a liquid. for use in the formulation of adhesives, sealants and prepolymers. Available frozen...voir plus Suprasec® 1306 is a 4,4' diphenylmethane diisocyanate (MDI). It is a light coloured solid at ambient temperature. This product can be supplied in bulk tankers as a liquid. for use in the formulation of adhesives, sealants and prepolymers. Available frozen solid in drums or in liquid bulk form. voir moins | |
| Suprasec® 2008 | Huntsman Polyurethanes EMEAI | Suprasec® 2008 is a prepolymerised diphenyl methane diisocyanate (MDI) offering excellent low temperature stability for use in the formulation of one (1k) or two component (2k) flexible polyurethane with good processing capabilities. | |
| Suprasec® 2020 | Huntsman Polyurethanes EMEAI | Suprasec® 2020 is a uretonimine-modified diphenyl methane diisocyanate (MDI) with lower viscosity. | |
| Suprasec® 2021 | Huntsman Polyurethanes EMEAI | Suprasec® 2021 is a prepolymerised diphenyl methane diisocyanate (MDI). This product is used in cast polyurethanes with engineering requirements. | |
| SUPRASEC® 2029 | Huntsman Polyurethanes EMEAI | SUPRASEC® 2029 is a prepolymerised diphenylmethane diisocyanate (MDI). | |
| Suprasec® 2060 | Huntsman Polyurethanes EMEAI | Suprasec® 2060 is a prepolymerised and reactivity modified diphenyl methane diisocyanate (MDI) for use in the formulation of one component (1k), long potlife, quick cure primers. | |
| Suprasec® 2234 | Huntsman Polyurethanes EMEAI | Suprasec® 2234 is a prepolymerised diphenyl methane diisocyanate (MDI) that can be used as a reactivity modifier in the formulation of one component (1k) long pot life adhesive and rubber crumb systems. | |
| SUPRASEC® 2330 | Huntsman Polyurethanes EMEAI | SUPRASEC® 2330, is a low viscosity modified, clear brown liquid diphenylmethane diisocyanate (MDI) with an average functionality of 2.35. It is recommended for use in the manufacture of adhesives. This product with medium high functionality and low viscos...voir plus SUPRASEC® 2330, is a low viscosity modified, clear brown liquid diphenylmethane diisocyanate (MDI) with an average functionality of 2.35. It is recommended for use in the manufacture of adhesives. This product with medium high functionality and low viscosity, is ideally suited for use in one-and two-component systems. Polyurethanes based on SUPRASEC® 2330 MDI are used in a wide variety of applications including: rubber crumb applications shoesole, wood and construction adhesives, adhesives for general industrial use and laminate adhesives for the panel industry. voir moins | |
| Suprasec® 2385 | Huntsman Polyurethanes EMEAI | Suprasec® 2385 is a uretonimine-modified diphenyl methane diisocyanate (MDI) with enhanced wetting properties for the formulation of multi-purpose, two component (2k) self levelling coatings that need to offer a long pot life. | |
| SUPRASEC 2416 | Huntsman Polyurethanes EMEAI | Suprasec 2416, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.1. Suprasec 2416 is recommended for use in the manufacture of coatings, adhesives and elastomers. This product, of low...voir plus Suprasec 2416, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.1. Suprasec 2416 is recommended for use in the manufacture of coatings, adhesives and elastomers. This product, of low functionality and low viscosity, is ideally suited for use in fast cure one component systems as primer and/or sealer. Polyurethanes based on Suprasec 2416 are used in a wide variety of applications including: protective coatings, industrial floor coatings and primers fast cure concrete primer, which acts as a damp cure membrane soil stabilisation, and hydro-active grout. voir moins | |
| Suprasec® 2496 | Huntsman Polyurethanes EMEAI | Suprasec® 2496 is a low viscosity modified diphenyl methane diisocyanate (MDI) for the formulation of self levelling flooring solutions including coatings, polyurethane mortar systems and screeds that offer high hardness, low termperature stability, excel...voir plus Suprasec® 2496 is a low viscosity modified diphenyl methane diisocyanate (MDI) for the formulation of self levelling flooring solutions including coatings, polyurethane mortar systems and screeds that offer high hardness, low termperature stability, excellent flow properties, advanced adhesion and a long potflife. voir moins | |
| Suprasec® 2651 | Huntsman Polyurethanes EMEAI | Suprasec® 2651 is a diphenyl methane diisocyanate (MDI) that is used for low viscosity, two component (2k) coating systems that need good penetration and wetting properties and a long pot life for self levelling flooring, PU mortar and screed applications...voir plus Suprasec® 2651 is a diphenyl methane diisocyanate (MDI) that is used for low viscosity, two component (2k) coating systems that need good penetration and wetting properties and a long pot life for self levelling flooring, PU mortar and screed applications. voir moins | |
| Suprasec® 4102 | Huntsman Polyurethanes EMEAI | Suprasec® 4102 is a diphenyl methane diisocyanate (MDI) with enhanced miscibility, low viscosity, good solderability and low temperature stability for the formulation of wire enamel coatings. | |
| SUPRASEC 9584 | Huntsman Polyurethanes EMEAI | SUPRASEC 9584, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.7. SUPRASEC 9584 is recommended for use in the manufacture of two component primers. This product, of high functionalit...voir plus SUPRASEC 9584, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.7. SUPRASEC 9584 is recommended for use in the manufacture of two component primers. This product, of high functionality and low viscosity, is developed in such a way that it is readily dispersable in modified castor oil without the addition of surface active agents. SUPRASEC 9584 is recommended for use in two component primer applications for concrete or wood. Concrete primers with a long potlife can be formulated from SUPRASEC 9584 and modified castor oil (like albodur 912). Additives can be formulated for enhanced processing and to adjust dry times. voir moins | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...voir plus Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...voir plus Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...voir plus Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...voir plus Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...voir plus Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...voir plus Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. voir moins | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Wannate HDI | DKSH | Wannate HDI is a cycloaliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Chemical name: Hexamethylene-1,6-diisocyanate. This product is available in Germany, Switzerland, Austria, Benelux, UK and Korea. | Request Sample |
| Wannate® HDI Hexamethylene Diisocyanate | Wanhua Chemical Group Co., Ltd. | Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishin...voir plus Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishing paint, plastic coating, top-grade wood-paint, industrial coating, anti-corrosive coating, elastomers, adhesives and textile finshing agent. Polyurethane coatings based on Wannate® HDI have a high degree of oil resistance coupled with good wear-resisting; It is also lightfast and has the property of powdering resistance,color retention and weathering resistance. In addition, Wannate® HDI also can be used in coating curing agent, high polymer adhesive, low temperature adhesive for printing paste, collar copolymer coating, and immobilized enzyme adhesive. voir moins | |
| Wannate X-600 | DKSH | Wannate X-600 is a colorless liquid cycloaliphatic diisocyanate. Because of its unique structure, Wannate X-600 shows high reactivity, excellent curing property and outsanding anti-yellowing performance. This product is available in Germany, Switzerland a...voir plus Wannate X-600 is a colorless liquid cycloaliphatic diisocyanate. Because of its unique structure, Wannate X-600 shows high reactivity, excellent curing property and outsanding anti-yellowing performance. This product is available in Germany, Switzerland and Austria. voir moins | Request Sample |
