| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...voir plus 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. voir moins | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...voir plus 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. voir moins | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...voir plus 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. voir moins | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| AB-70F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more. | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...voir plus Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. voir moins | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...voir plus Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...voir plus Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...voir plus Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...voir plus Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...voir plus Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...voir plus Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. voir moins | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...voir plus Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. voir moins | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...voir plus Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. voir moins | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...voir plus Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. voir moins | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...voir plus Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. voir moins | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...voir plus Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. voir moins | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...voir plus ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. voir moins | Request Sample |
| Acrylic Resin GA-300 | DKSH | Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance e...voir plus Acrylic resin GA-300 is a highly functional glycidyl acrylic resin that can react with carboxyl and amine-functional compounds to produce durable coatings. It can work as a curing agent for carboxyl polyester resins in hybrid system, or as a performance enhancing additive at amounts of 1–5% in polyester-TGIC or hybrid powder coatings to increase crosslinking density, film hardness and chemical resistance. Acrylic resin GA-300 can also be used in specialty applications, such as polysiloxane based heat-resistant powder coatings. It provides stronger film integrity than TGIC as a curing agent for carboxyl polyester resins. Although the amount of Acrylic resin GA-300 in formulation depends on the equivalent weight of the polyester resin, its optimum level needs to be determined by actual laboratory evaluation. This product is available in Europe. voir moins | Request Sample |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...voir plus Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). voir moins | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...voir plus Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). voir moins | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...voir plus Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. voir moins | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...voir plus Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. voir moins | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...voir plus Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. voir moins | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...voir plus Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. voir moins | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...voir plus Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. voir moins | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...voir plus Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. voir moins | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...voir plus Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. voir moins | |
| Aspartic Ester Resin Sunaspar SN220 | Yantai Suny Chem International Co., Ltd. | Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...voir plus Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. voir moins | |
| Aspartic Ester Resin Sunaspar SN520 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...voir plus Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. voir moins | |
| Atrelux UV100 | Atcoat GmbH | Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% ...voir plus Atrelux UV100 is a radiation curring polyester acyrylate, modified with natural fatty acids, suitable for top coats, fillers and primers. This product has good adhesion on wood, and is also recommended for printing inks. Atrelux UV100 has a solid of 100% and a viscosity of 40 to 60 sec. voir moins | |
| Atrelux UV3000 | Atcoat GmbH | Atrelux UV3000 is an epoxy acrylate resin with chemical resistance, high reactivity, scratch resistant films, hard, and flexible. Atrelux UV3000 has a solid of 100% and a viscosity of 400 to 600 dPas. | |
| Atrelux UV3300 | Atcoat GmbH | Atrelux UV3300 is an epoxy acrylate resin with scratch resistant films, chemical resistant, corrosion resistant, high reactivity, hard, and flexible. Atrelux UV3300 has a solid of 100% and a viscosity of 120 to 180 dPas. | |
| Atrelux UV6154/54 BA | Atcoat GmbH | Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of ...voir plus Atrelux UV6154/54 BA is a hydroxyl group containing polyacrylic acrylate, curing with radiation (dual cure) and isocyanate, which is scratch resistant and non-adhesive for non-yellowing coatings. Atrelux UV6154/54 BA has a solid of 54% and a viscosity of 25 to 40 dPas. voir moins | |
| Atrepur 288/60 D4 | Atcoat GmbH | Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...voir plus Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 288/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 4000 to 6000 mPas. voir moins | |
| Atrepur 340/54 D4 | Atcoat GmbH | Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...voir plus Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 340/54 D4 has an oil length of 60, a solid of 54%, and a viscosity of 8000 to 12000 mPas. voir moins | |
| Atrepur 939/60 K6 | Atcoat GmbH | Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natura...voir plus Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 939/60 K6 has an oil length of 60, a solid of 60%, and a viscosity of 5.5 to 7.5 Pas. voir moins | |
| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...voir plus Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. voir moins | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...voir plus Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. voir moins | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...voir plus Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. voir moins | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...voir plus Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. voir moins | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...voir plus Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. voir moins | |
| Atrepur U1350/60 D4 | Atcoat GmbH | Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natura...voir plus Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1350/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 40 to 60 dPas. voir moins | |
| Atrepur U41/65 BA | Atcoat GmbH | Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resin...voir plus Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U41/65 BA has an oil length of 41, a solid of 65%, and a viscosity of 17 to 33 dPas. voir moins | |
| Atrepur U600/60 D4 | Atcoat GmbH | Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...voir plus Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 26 to 35 dPas. voir moins | |
| Atrepur U600/60 K3 | Atcoat GmbH | Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins ...voir plus Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 K3 has an oil length of 60, a solid of 60%, and a viscosity of 25 to 35 dPas. voir moins | |
| Atrepur U600/HS70 IP J | Atcoat GmbH | Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, pl...voir plus Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/HS70 IP J has an oil length of 60, a solid of 70%, and a viscosity of 45 to 65 dPas. voir moins | |
| Atrepur U600HS/75 D4 | Atcoat GmbH | Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on nat...voir plus Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600HS/75 D4 has an oil length of 60, a solid of 75%, and a viscosity of 45 to 65 dPas. voir moins | |
| Atresal C 144/70 D4 | Atcoat GmbH | Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty aci...voir plus Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 144/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 4200 to 5200 mPas. voir moins | |
| Atresal C17/60 D6 | Atcoat GmbH | Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. ...voir plus Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 120 s (50% DIN4). voir moins | |
| Atresal C19/60 D4 | Atcoat GmbH | Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...voir plus Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C19/60 D4 has an oil length of 66, a solid of 60%, and a viscosity of 4 to 7 Pas. voir moins | |
| Atresal C19/60 D6 | Atcoat GmbH | Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...voir plus Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 160 s (50% DIN4). voir moins | |
| Atresal K1552/50 KY | Atcoat GmbH | Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins...voir plus Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1552/50 KY has an oil length of 29, a solid of 50%, and a viscosity of 190 to 250 sec. voir moins | |
| Atresal K2253/75 SN | Atcoat GmbH | Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...voir plus Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2253/75 SN has an oil length of 41 a solid of 75%, and a viscosity of 90 to 125 dPas. voir moins | |
| Atresal K381/60 X | Atcoat GmbH | Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based o...voir plus Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/60 X has an oil length of 38 a solid of 60%, and a viscosity of 120 to 170 sec. voir moins | |
| Atresal L1878/60 K3 | Atcoat GmbH | Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...voir plus Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/60 K3 has an oil length of 61, a solid of 60%, and a viscosity of 90 to 120 sec. voir moins | |
| Atresal L1878/70 D4 | Atcoat GmbH | Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd r...voir plus Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/70 D4 has an oil length of 61, a solid of 70%, and a viscosity of 120 to 160 dPas. voir moins | |
| Atresal L1878/75 D6 | Atcoat GmbH | Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, a...voir plus Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/75 D6 has an oil length of 61, a solid of 75%, and a viscosity of 28 to 32 sec. voir moins | |
| Atresal L1878HS/85 D4 | Atcoat GmbH | Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd...voir plus Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878HS/85 D4 has an oil length of 64, a solid of 85%, and a viscosity of 80 to 100 mPas. voir moins | |
| Atresal L2118/60 K3 | Atcoat GmbH | Atresal L2118/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of color stable house paints and industrial lacquers based on air drying and special fatty acids. Atcoat alkyd resins are ba...voir plus Atresal L2118/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of color stable house paints and industrial lacquers based on air drying and special fatty acids. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2118/60 K3 has an oil length of 64, a solid of 60%, and a viscosity of 90 to 120 sec. voir moins | |
| Atresal L2453/60 D6 | Atcoat GmbH | Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durabl...voir plus Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durable and has good process-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 D6 has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. voir moins | |
| Atresal L2453/60 IPH | Atcoat GmbH | Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compa...voir plus Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compatibility with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 IPH has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. voir moins | |
| Atresal L68/75 D6 | Atcoat GmbH | Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75...voir plus Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 D6 has an oil length of 68, a solid of 75%, and a viscosity of 35 to 45 sec. voir moins | |
| Atresal L68/75 IPH | Atcoat GmbH | Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH ...voir plus Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH has an oil length of 68, a solid of 75%, and a viscosity of 90 to 130 sec. voir moins | |
| Atresal LO 07 | Atcoat GmbH | Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat...voir plus Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 07 has an oil length of 82, a solid of 100%, and a viscosity of 3000 to 5000 mPas. voir moins | |
| Atresal LO 09 | Atcoat GmbH | Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atco...voir plus Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 09 has an oil length of 82, a solid of 100%, and a viscosity of 800 to 2000 mPas. voir moins | |
| Atresal LO33/70 D4 | Atcoat GmbH | Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the mar...voir plus Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the marine area and decorative paints with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO33/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 5000 to 9000 mPas. voir moins | |
| Atresal LO490/85 TPnB | Atcoat GmbH | Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low...voir plus Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low yellowing decorative paints, and wood stains. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO490/85 has an oil length of 65, a solid of 85%, and a viscosity of 1500 to 3000 mPas. voir moins | |
| Atresal LO95/60 K6 | Atcoat GmbH | Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are ba...voir plus Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO95/60 K6 has an oil length of 74, a solid of 60%, and a viscosity of 80 to 130 s (60% DIN4). voir moins | |
| Atresal M2391/50 D X | Atcoat GmbH | Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through...voir plus Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M2391/50 D X has an oil length of 49, a solid of 50%, and a viscosity of 90 to 120 sec. voir moins | |
| Atresal M491/50 K2 Y | Atcoat GmbH | Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through dryi...voir plus Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M491/50 K2 Y has an oil length of 49, a solid of 50%, and a viscosity of 65 to 80 sec. voir moins | |
| Atresal M49/50 D4 | Atcoat GmbH | Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface....voir plus Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 D4 has an oil length of 49, a solid of 50%, and a viscosity of 110 to 140 sec. voir moins | |
| Atresal M49/50 K2 | Atcoat GmbH | Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...voir plus Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K2 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. voir moins | |
| Atresal M49/50 K3 | Atcoat GmbH | Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...voir plus Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K3 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. voir moins | |
| Atresal M49/55 D4 | Atcoat GmbH | Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and f...voir plus Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 110 to 114 sec. voir moins | |
| Atresal M49/55 K3 | Atcoat GmbH | Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoa...voir plus Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 45 to 55 sec. voir moins | |
| Atresal M49HS/75 BA | Atcoat GmbH | Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...voir plus Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 75%, and a viscosity of 60 to 80 dPas. voir moins | |
| Atresal M49M/55 D4 | Atcoat GmbH | Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and ...voir plus Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49M/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 120 to 180 sec. voir moins | |
| Atresal M49P/55 K3 | Atcoat GmbH | Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...voir plus Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 20000 to 40000 mPas. voir moins | |
| Atresal MO 34/52 D4 | Atcoat GmbH | Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural r...voir plus Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal MO 34/52 D4 has an oil length of 55, a solid of 52%, and a viscosity of 6 to 9 Pas. voir moins | |
| Atresal SO 485/60 X | Atcoat GmbH | Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended...voir plus Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended for machinery enamels and industrial coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 3.8 to 4.8 Pas. voir moins | |
| Atresal SO 498/65 BA | Atcoat GmbH | Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and anima...voir plus Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 498/65 BA has an oil length of 42 a solid of 65%, and a viscosity of 1600 to 2600 mPas. voir moins | |
| Atresal ST 31/60 BA | Atcoat GmbH | Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, p...voir plus Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 BA has an oil length of 31, a solid of 60%, and a viscosity of 14.5 to 19.5 dPas. voir moins | |
| Atresal ST 31/60 SN | Atcoat GmbH | Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are...voir plus Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 SN has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. voir moins | |
| Atresal ST 31/60 X | Atcoat GmbH | Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...voir plus Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 X has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. voir moins | |
| Atresil M52/85 D4 | Atcoat GmbH | Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials lik...voir plus Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresil M52/85 D4 has an oil length of 56, a solid of 85%, and a viscosity of 2 to 10 Pas. voir moins | |
| Atresin OD 2003 | Atcoat GmbH | Atresin OD 2003 is a saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, good weathering, and good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has ...voir plus Atresin OD 2003 is a saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, good weathering, and good mechanical properties. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 95: 5 with Primid XL552. voir moins | |
| Atresin SD 1108 | Atcoat GmbH | Atresin SD 1108 is an accelerated, saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, and good weathering. It is recommended for external use and since it does not contain any solvents, it is very environmen...voir plus Atresin SD 1108 is an accelerated, saturated, carboxylated powder polyester resin with gas oven stability, enhanced tribo properties, and good weathering. It is recommended for external use and since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 with Araldit PT910. voir moins | |
| Atresin SD 1118 | Atcoat GmbH | Atresin SD 1118 is a saturated, carboxylated, flexibilated powder polyester resin for external use with good gas oven stability, enhanced tribo properties, and good weathering. Since it does not contain any solvents, it is very environmental friendly, and...voir plus Atresin SD 1118 is a saturated, carboxylated, flexibilated powder polyester resin for external use with good gas oven stability, enhanced tribo properties, and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 with Araldit PT910. voir moins | |
| Atresin SD 1206 | Atcoat GmbH | Atresin SD 1206 is a saturated, carboxylated powder polyester resin for external use with good gas oven stability and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7...voir plus Atresin SD 1206 is a saturated, carboxylated powder polyester resin for external use with good gas oven stability and good weathering. Since it does not contain any solvents, it is very environmental friendly, and it has polyester: hardener ratio of 93: 7 to 94: 6 with Araldit PT910. voir moins |
