| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...voir plus ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. voir moins | Request Sample |
| ADDITOL® VXW 5907 | Allnex | ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varie...voir plus ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varies with the type of the water dilutable paint. voir moins | Request Sample |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...voir plus ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. voir moins | Request Sample |
| ADDITOL® VXW 6393 | Allnex | ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. | Request Sample |
| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| ADDITOL® XW 393 | Allnex | ADDITOL® XW 393 is a antifoam for waterborne paint systems, without silicone addition. | Request Sample |
| AFCONA - 2018 | AFCONA Additives Sdn Bhd | AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing a...voir plus AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primers, and in NC lacquers for wood. voir moins | |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...voir plus AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. voir moins | |
| AFCONA - 2021 | AFCONA Additives Sdn Bhd | AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coat...voir plus AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coatings for wood, acid curing coatings for wood, air drying alkyd decorative paints and protective coatings, stoving systems for industrial uses, and in NC lacquers for wood and car refinishes. voir moins | |
| AFCONA - 2024 | AFCONA Additives Sdn Bhd | AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based ...voir plus AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based coatings, printing inks, and thermosetting resin systems where it eliminates foam and blistering. AFCONA – 2024 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. voir moins | |
| AFCONA - 2050 | AFCONA Additives Sdn Bhd | AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 20...voir plus AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 2050 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. voir moins | |
| AFCONA - 2270 | AFCONA Additives Sdn Bhd | AFCONA – 2270 is a silicone-free polymer appearing as a clear liquid. This product functions as a moderate defoaming agent with fewer side effects which prevents the formation of foam and blisters during manufacture and application. AFCONA – 2270 is compa...voir plus AFCONA – 2270 is a silicone-free polymer appearing as a clear liquid. This product functions as a moderate defoaming agent with fewer side effects which prevents the formation of foam and blisters during manufacture and application. AFCONA – 2270 is compatible with most resin systems, is recommended for medium viscosity applications, and is suitable for use in ultraviolet curing systems, polyurethane systems for wood, plastic, and car refinishes, in airless spray coatings, in stoving paints for general industrial purposes, in epoxy systems, and in water-based systems. voir moins | |
| AFCONA - 2290 | AFCONA Additives Sdn Bhd | AFCONA – 2290 is a silicone-free defoaming agent appearing as a clear liquid. This product functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy, polyurethane, UPE, and ultraviolet c...voir plus AFCONA – 2290 is a silicone-free defoaming agent appearing as a clear liquid. This product functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy, polyurethane, UPE, and ultraviolet coatings, high polar systems such as NC and acid curing, and in primer coatings. voir moins | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melami...voir plus AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. voir moins | |
| AFCONA - 2725 | AFCONA Additives Sdn Bhd | AFCONA – 2725 is a silicone-free polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a defoamer, air-releaser, and levelling for solvent-free epoxy UPE, PMMA, and polyurethane systems. AFCONA – 2725 finds application in floo...voir plus AFCONA – 2725 is a silicone-free polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a defoamer, air-releaser, and levelling for solvent-free epoxy UPE, PMMA, and polyurethane systems. AFCONA – 2725 finds application in floor coatings and pigment paste preparations. voir moins | |
| AFCONA - 2754 | AFCONA Additives Sdn Bhd | AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar...voir plus AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar systems used in wood coatings such as NC, polyurethane, and acid curing, and in coil coatings on basic PVC plastisols. voir moins | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...voir plus BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. voir moins | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...voir plus BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. voir moins | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...voir plus BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. voir moins | |
| Borchers® AF T | OMG Borchers GmbH | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| BYK®-012 | BYK | BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product i...voir plus BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product is silicone- and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant and can be used in a pH-range of 3 - 12. The product may lead to turbidity and seeding in clear coats. voir moins | |
| BYK®-014 | BYK | BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especial...voir plus BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especially suitable for defoaming emulsion paints and plasters with a PVC range of 30-85. The product is silicone-free and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant, and can be used in a pH range of 3 - 12. voir moins | |
| BYK®-054 | BYK | BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be eval...voir plus BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be evaluated. BYK-054 is also suitable to defoam plastisols. voir moins | |
| BYK®-055 | BYK | BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters wit...voir plus BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. voir moins | |
| BYK®-057 | BYK | BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters...voir plus BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. voir moins | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK®-1711 | BYK | BYK®-1711 is a mixture of foam destroying polymers and hydrophobic solids that is silicone-free. This product is very effective, even at low dosage levels, and it is easy to incorporate, exhibits excellent storage stability, wide compatibility from UV- to...voir plus BYK®-1711 is a mixture of foam destroying polymers and hydrophobic solids that is silicone-free. This product is very effective, even at low dosage levels, and it is easy to incorporate, exhibits excellent storage stability, wide compatibility from UV- to 2-pack systems, no seeding in clear coats and is silicone-free and contains no mineral oil. voir moins | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1770 | BYK | BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented ...voir plus BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented systems and clear coats. The addition of BYK-1770 has no negative influence on turbidity (transparency) and gloss in high gloss systems. The additive is solvent-free. voir moins | |
| BYK®-1790 | BYK | BYK®-1790 is a mixture of foam destroying polymers that is silicone free. This product is specially developed for defoaming solvent-free radiation curable systems (UV & EB). BYK-1790 shows excellent defoaming performance in coatings containing commonly us...voir plus BYK®-1790 is a mixture of foam destroying polymers that is silicone free. This product is specially developed for defoaming solvent-free radiation curable systems (UV & EB). BYK-1790 shows excellent defoaming performance in coatings containing commonly used pigments, extenders and matting agents. voir moins | |
| BYK®-1794 | BYK | BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems....voir plus BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems. It is suitable for pigmented and non-pigmented systems, has no effect on surface properties or transparency, and is effective during production and further processing. The additive consists of 100% solids and is solvent-free. BYK-1794 is used in thick layer systems, such as coatings for flooring. BYK-1794 offers excellent compatibility with solvent-free coatings for ballast tanks, tank interiors, etc. It is also highly effective in 100% polyurethane and polyaspartic acid ester systems for pipeline and concrete coatings as well as other solvent-free coating systems for a high degree of corrosion protection. In typical solvent-borne coil coating systems (e.g. polyester melamine or PUR systems), BYK-1794 is very compatible and produces good, spontaneous defoaming effects. Excellent results can be achieved in UV systems for wood and furniture coatings. voir moins | |
| BYK-3540 | BYK | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | |
| BYK-397 | BYK | BYK-397 is a silicone-and fluorine-free leveling additive for solvent-borne coating systems with excellent defoaming properties. | |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of...voir plus DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | Request Sample |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...voir plus Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. voir moins | |
| Defoamer EDW-707 | HS CHEM CO.,LTD | Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...voir plus Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. voir moins | |
| Defoamer EDW-709 | HS CHEM CO.,LTD | Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...voir plus Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. voir moins | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...voir plus Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. voir moins | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...voir plus Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. voir moins | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...voir plus Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. voir moins | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...voir plus Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. voir moins | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...voir plus Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....voir plus Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. voir moins | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...voir plus Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. voir moins | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...voir plus Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...voir plus Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...voir plus Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent ba...voir plus Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent based coating systems. Small additions may also contribute to improved flow, and reduce surface imperfections such as craters and orange peel. Dynoadd® F-708 has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-708 can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. Dynoadd® F-708 has applications in coil coatings, general industry, packaging coatings, and PVdF coatings. A first trial dose of 0.05% is recommended. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...voir plus Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. voir moins | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...voir plus Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. voir moins | Request Sample |
| Efka® 2020 | BASF Formulation Additives | Efka® 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of ...voir plus Efka® 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. voir moins | |
| Efka® 2720 | BASF Formulation Additives | Efka® 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as: unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| LOPON® E 100 | ICL Phosphate Specialty | LOPON® E 100 is a defoamer for glossy paints. It is a VOC-mineral-oil- and silicon-free product. | Request Sample |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...voir plus SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. voir moins | |
| SCHWEGO® Foam 6325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic cop...voir plus SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. SCHWEGO® foam 6325 is readily emulsifiable in water. SCHWEGO® foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters. voir moins | |
| SCHWEGO® Foam 8333 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8333 is a defoamer and deaerator for water-based coating systems. This yellow clear liquid is VOC- and silicone free. It is especially suitable to defoam systems based on polyurethane, polyester and their hybrides. It is effective as defoame...voir plus SCHWEGO® Foam 8333 is a defoamer and deaerator for water-based coating systems. This yellow clear liquid is VOC- and silicone free. It is especially suitable to defoam systems based on polyurethane, polyester and their hybrides. It is effective as defoamer and as de-aerating agent. SCHWEGO® foam 8333 is an interfacially active product that suppresses the formation of air inclusions and destroys air bubbles before the film dries. SCHWEGO® foam 8333 preserves gloss and is therefore also suitable for varnishes. Coatings with SCHWEGO® foam 8333 show a long term stability above average. voir moins | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| SURFYNOL® 104 A | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| SURFYNOL® 104 BC | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 DPM | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 DPM is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 E | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 H | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PA | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PA is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PG 50 | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® AD-01 | Evonik Operations GmbH, BL Coating Additives | Surfynol® AD 01 is multi-functional gemini surfactant combining dynamic wetting and molecular defoaming. Surfynol® AD 01 also acts as a coalescing aid. | Request Sample |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | Request Sample |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...voir plus Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. voir moins | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this pr...voir plus TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C. voir moins | Request Sample |
| TEGO® Foamex 6 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 6 is an efficient concentrate defoamer for water-based paints with good long-term stability. TEGO® Foamex 6 is silicone- and silica-free. | Request Sample |
| TEGO® Foamex 832 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. T...voir plus TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. TEGO® Foamex 832 is based on sustainable raw materials, for use in the millbase of pigmented printing inks, and is suitable for contact with foodstuffs. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. voir moins | Request Sample |
| TEGO® Foamex 9 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica. | Request Sample |
| UNIQFOAM 182 W | UNIQCHEM (UK) CO., LTD. | UNIQFOAM 182 W is a water-borne non-silicone defoamer. This product is characterized by its surface tension reduction properties and heat stability. It is used in water-borne baking systems and water-borne epoxies. | |
| WorléeAdd 425 | Worlée-Chemie G.m.b.H. | WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small addit...voir plus WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small additional quantities W´Add 425 features a fast foam destroying, so that foam and blister free surfaces can be produced. voir moins | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...voir plus WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. voir moins | |
| WorléeAdd 677 | Worlée-Chemie G.m.b.H. | WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house pai...voir plus WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house paints, 2 component-EP-systems, industrial coatings, printing inks etc..This product appears as a clear, slightly yellowish liquid. voir moins | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...voir plus WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. voir moins |
