| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...voir plus ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. voir moins | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...voir plus ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. voir moins | |
| APL-308 | Tianyi Chemical Engineering Material Co., Ltd. | APL-308, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| APL-309 | Tianyi Chemical Engineering Material Co., Ltd. | APL-309, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| BYK®-300 | BYK | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | |
| BYK®-354 | BYK | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...voir plus BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. voir moins | |
| BYK®-355 | BYK | BYK®-355 is a solution of a polyacrylate. This product is mainly used as a leveling additive in industrial coatings, OEM and automotive refinish formulations, as well as in coil coatings. | |
| BYK®-356 | BYK | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-358 N | BYK | BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and doe...voir plus BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. This product is suited for high quality pigmented and non-pigmented industrial coatings. BYK®-358 N does not cause turbidity in clear coats or haze in pigmented systems. This additive is thermally stable. voir moins | |
| BYK®-359 | BYK | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...voir plus BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. voir moins | |
| BYK®-361 N | BYK | BYK®-361 N is a polyacrylate that is the solvent-free version of BYK-358 N. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability o...voir plus BYK®-361 N is a polyacrylate that is the solvent-free version of BYK-358 N. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. voir moins | |
| BYK®-381 | BYK | BYK®-381 is a leveling additive for aqueous systems. It is a solution of a polyacrylate, ionic. This product is an acrylic leveling additive which improves only leveling and has no effect on surface tension. | |
| CoatOSil* FLX Coating Modifier | Momentive | CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This pro...voir plus CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This product is compatible with many organic resin systems and pigments. voir moins | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...voir plus Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. voir moins | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...voir plus Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. voir moins | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| DISPERBYK®-174 | BYK | DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially sui...voir plus DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially suitable for producing pigment concentrates. In addition to stabilizing pigments, DISPERBYK®-174 reduces millbase viscosity, thus enabling the formulator to produce highly filled pigment concentrates without difficulty voir moins | |
| DISPERBYK®-180 | BYK | DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings ...voir plus DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings to deflocculate and stabilize preferably inorganic pigments (especially titanium dioxide). DISPERBYK®-180 is solvent-free, reduces millbase viscosity and therefore is suitable for “low-VOC“ and “VOC-free“ systems. voir moins | |
| DISPERBYK®-182 | BYK | DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area a...voir plus DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area and is compatible with both solvent-borne and aqueous systems. DISPERBYK®-182 can be utilized - alone or in combination with DISPERBYK®-108 (see Data Sheet W217/PW3) - to produce solvent-borne pigment concentrates. voir moins | |
| DISPERBYK®-185 | BYK | DISPERBYK®-185 is a high molecular weight wetting and dispersing additive for solvent-borne and solvent-free pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is solvent-f...voir plus DISPERBYK®-185 is a high molecular weight wetting and dispersing additive for solvent-borne and solvent-free pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is solvent-free and is especially suitable for the production of alkylphenol ethoxylate- and solvent-free universal tinters which are used in aqueous, solvent-borne and solvent-free architectural coatings. DISPERBYK®-185 is also well suited for the prevention of flooding/floating in PVC-plastisols for coil coating applications. voir moins | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| EDAPLAN® LA 402 | Munzing Chemie | EDAPLAN® LA 402 is a yellowish, clear liquid suitable for all aqueous coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems. Advantages of ED...voir plus EDAPLAN® LA 402 is a yellowish, clear liquid suitable for all aqueous coating and printing ink systems. It is supplied as water insoluble acid and has to be neutralized before use. The polymer is compatible with all common resin systems. Advantages of EDAPLAN® LA 402 is that it improves gloss and reduces haze, is non-silicone, water resistance is not affected, and it prevents surface defects. voir moins | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting synthetic wax, and carnauba wax blend. This wax blend shows a melting peaks ranging from 84 – 110°C. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies b.v.b.a. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EE 95 is an anionic, high-density synthetic wax emulsion. Hydrocer EE-95 is used in both air dry and baked coatings. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP-91 is recommened for use in water based coating systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion. Hydrocer ER-77 is used in both air dry and baked coatings. | |
| Induprint SE 284 | Indulor Chemie GmbH | Induprint SE 284 is a zinc crosslinked soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very good heat seal resistance, high gloss, excellent flexibility, and is free of glycols or glycol ethers. ...voir plus Induprint SE 284 is a zinc crosslinked soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very good heat seal resistance, high gloss, excellent flexibility, and is free of glycols or glycol ethers. Induprint SE 284 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. voir moins | |
| Induprint SE 2872 | Indulor Chemie GmbH | Induprint SE 2872 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has good water resistance, high gloss, and excellent transfer properties. Induprint SE 2872 is used in water-based overprint varnish...voir plus Induprint SE 2872 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has good water resistance, high gloss, and excellent transfer properties. Induprint SE 2872 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. voir moins | |
| Induprint SE 290 | Indulor Chemie GmbH | Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 i...voir plus Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks voir moins | |
| Induprint SE 295 | Indulor Chemie GmbH | Induprint SE 295 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, very high flexibility, and very good adhesion on films. Induprint SE 295 is used in water-based overprint va...voir plus Induprint SE 295 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, very high flexibility, and very good adhesion on films. Induprint SE 295 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. voir moins | |
| Induprint SE 371 | Indulor Chemie GmbH | Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-ba...voir plus Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. voir moins | |
| Induprint SE 375 | Indulor Chemie GmbH | Induprint SE 375 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, low VOC, and is free of glycols or glycol ethers. Induprint SE 375 is used in water-based overprint varnishes an...voir plus Induprint SE 375 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, low VOC, and is free of glycols or glycol ethers. Induprint SE 375 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. voir moins | |
| Induprint SE 87 | Indulor Chemie GmbH | Induprint SE 87 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent transparency, very good block resistance, high heat resistance, excellent gloss, and is free of glycols or glycol ethers...voir plus Induprint SE 87 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent transparency, very good block resistance, high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 87 is used in water-based overprint varnishes, endless press/calendering varnishes, and water-based flexographic and gravure-printing inks. voir moins | |
| Minspar™ 7 | LEHVOSS Group | Minspar™ 7 is a fine particle size, ground feldspar with a tightly controlled particle size distribution. It is easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The easily dispersed to a high Hegman grind to produce c...voir plus Minspar™ 7 is a fine particle size, ground feldspar with a tightly controlled particle size distribution. It is easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The combination of low 325 mesh residue, particle size, and exterior durability make this product an excellent mineral additive for interior and exterior non-flat coatings, adhesives, sealants, and caulk compounds. voir moins | |
| Octa-Soligen® Calcium 5, neutral | OMG Borchers GmbH | Octa-Soligen® Calcium 5, neutral is an auxiliary drier that is used solely in combination with primary and secondary driers. When added during grinding, it improves pigment wetting and dispersion. This product helps increase the hardness and gloss of the ...voir plus Octa-Soligen® Calcium 5, neutral is an auxiliary drier that is used solely in combination with primary and secondary driers. When added during grinding, it improves pigment wetting and dispersion. This product helps increase the hardness and gloss of the paint film and is used in solventborne systems. voir moins | |
| Purox® B Flakes Benzoic Acid | LANXESS (former Emerald Performance Materials) | Benzoic acid is a key raw material in the production of alkyd resins to control viscosity and enhance desirable characteristics in the final alkyd coating film, including gloss, adhesion, hardness, and chemical resistance, particularly resistance to alk...voir plus Benzoic acid is a key raw material in the production of alkyd resins to control viscosity and enhance desirable characteristics in the final alkyd coating film, including gloss, adhesion, hardness, and chemical resistance, particularly resistance to alkaline substances. It is also used as an additive for effective corrosion inhibition. The high quality of Purox B Flakes offers improved chemical characteristics, low odor and color, and high efficiency. It is easy to use and incorporate, with low agglomeration tendency. It dissolves very well in solvents such as xylene. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins | |
| Raybo 57 OptiSperse HS | Raybo Chemical | Raybo 57 OptiSperse HS is a broad-spectrum dispersing agent in an amber liquid form. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applications. | |
| Raybo 5790 OptiSperse | Raybo Chemical | Raybo 5790 OptiSperse is a broad-spectrum dispersing agent in an amber liquid form with a total solids content of 90%. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applicati...voir plus Raybo 5790 OptiSperse is a broad-spectrum dispersing agent in an amber liquid form with a total solids content of 90%. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applications. voir moins | |
| S-232-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-232-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommeneded for all clear OPV, water-based, solvent-based, and UV coatings. | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently als...voir plus SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently also impair the gloss. SCHWEGO® flow 8057 eliminates such defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. voir moins | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suita...voir plus SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems. Flow disturbances, like orange peel or ropiness are undesirable film characteristics, which frequently also impair the gloss. SCHWEGO® flow 8058 eliminates these surface defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. voir moins | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigmen...voir plus SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6246 is especially suitable for enamels and industrial-,wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended. voir moins | |
| SCHWEGO® Wett 6247 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6247 is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6247 is especially suitab...voir plus SCHWEGO® Wett 6247 is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6247 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended. voir moins | |
| SCHWEGO® Wett 8075 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocy...voir plus SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocyanines. This product has the following typical properties for optimal pigmentation: dispersion time is reduced, depth of colour is intensified. reduction of settlement, gloss increase, reduction of floatation phenomena and improvement of levelling. voir moins | |
| SCHWEGO® Wett 8076 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8076 is a wetting and dispersing additive for solvent borne coating systems. It is added to solvent borne coating systems to disperse inorganic pigments. SCHWEGO® wett 8076 is suitable to disperse organic pigments, such as phthalocyanines. T...voir plus SCHWEGO® Wett 8076 is a wetting and dispersing additive for solvent borne coating systems. It is added to solvent borne coating systems to disperse inorganic pigments. SCHWEGO® wett 8076 is suitable to disperse organic pigments, such as phthalocyanines. This product is a clear to colourless liquid. voir moins | |
| SCHWEGO® Wett 8079 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8079 is a wetting and dispersing additive for water-based coating systems. It is used to disperse inorganic and organic pigments in all kinds of high quality water-based coating systems. It is suitable for universal pastes. This product is a...voir plus SCHWEGO® Wett 8079 is a wetting and dispersing additive for water-based coating systems. It is used to disperse inorganic and organic pigments in all kinds of high quality water-based coating systems. It is suitable for universal pastes. This product is a polymeric dispersing additive that shows a high affinity to pigment surfaces. It improves: gloss, tinting strength, deflocculation stability, and prevents floating and flooding. voir moins | |
| Siltech® C-42 | Siltech Corp. | Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. ...voir plus Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy resins. This product is 100% active and is soluble in aliphatic and aromatic solvents. voir moins | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| Soluryl 70 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 70 is a grinding vehicle and polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and good viscosity stability and high gloss. | |
| Soluryl RP-590 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RP-590 is a modified acryl-styrene copolymer for use in pre-print application. It provides heat resistance, anti-blocking properties, rub resistance, and high gloss. | |
| Soluryl RV-4916 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent glo...voir plus Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent gloss and water resistance. voir moins | |
| Soluryl RX-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let dow...voir plus Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. voir moins | |
| Soluryl RX-30 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as...voir plus Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. voir moins | |
| Soluryl S-820 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-820 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, high gloss and transparent, and excellent ink transfer and printability. | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in water borne latex paints. | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...voir plus WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. voir moins | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...voir plus WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. voir moins | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...voir plus WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. voir moins | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...voir plus WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. voir moins | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...voir plus WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. voir moins | |
| WorléeAdd 700 | Worlée-Chemie G.m.b.H. | WorléeAdd 700 is an aqueous emulsion of self-crosslinking elastomeric silicone for use in printing inks, industrial coatings, and parquet varnishes. This opaque liquid is used in systems mostly based on acrylic dispersions. In printing inks WorléeAdd 700 ...voir plus WorléeAdd 700 is an aqueous emulsion of self-crosslinking elastomeric silicone for use in printing inks, industrial coatings, and parquet varnishes. This opaque liquid is used in systems mostly based on acrylic dispersions. In printing inks WorléeAdd 700 improves adhesion, flexibility, water resistance as well as resistance against mild detergents. voir moins |
