| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented ...voir plus BLISTER FREE 66 can be used as a de-aerating agent in all conventional coating systems. It is particularly effective in systems based on polyesters, polyurethanes and acrylates. The formation of air bubbles during manufacture and application is prevented and entrapped air as well as bubbles are quickly destroyed. Defoaming is promoted and defects like pinholes and craters are avoided. This product is a colourless to light yellowish liquid. voir moins | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...voir plus BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. voir moins | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...voir plus Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. voir moins | |
| TEGO® Wet 505 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO...voir plus TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. voir moins | Request Sample |
| TEGO® Wet KL 245 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings...voir plus TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings. voir moins | Request Sample |
