| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| SILCOLEASE RCA 391 | Elkem Silicones | SILCOLEASE RCA 391 is a release modifier designed to give incremental levels of release when added to a release coating formulation. SILCOLEASERCA 391 may be used at addition levels from 1% to 100% of the polymer component in the formulation with release...voir plus SILCOLEASE RCA 391 is a release modifier designed to give incremental levels of release when added to a release coating formulation. SILCOLEASERCA 391 may be used at addition levels from 1% to 100% of the polymer component in the formulation with release values increasing proportionally. Unlike traditional tight release modifiers which are based on vinyl functional silicone resins, SILCOLEASERCA 391 is based on hydride functional silicone resin technology. As a result, SILCOLEASERCA 391 may offer greater efficiency as a tight release modifier compared to vinyl functional products against certain adhesives. voir moins | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| SILCOLEASE PC-94 | Elkem Silicones | SILCOLEASE PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction. SILCOLEASE PC-94, when properly formulated with a release polymer e...voir plus SILCOLEASE PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction. SILCOLEASE PC-94, when properly formulated with a release polymer emulsion, provides a thermally curable release coating for paper substrates. voir moins | |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation...voir plus SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. voir moins | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...voir plus SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. voir moins | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...voir plus SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. voir moins | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...voir plus SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. voir moins | |
| SILCOLEASE UV CATA 221 | Elkem Silicones | SILCOLEASE UV CATA 221 UV/EB cationic initiator is a 20% solids solution of diaryl iodonium tetrakis (pentafluoro phenyl) borate salt in reactive diluent providing low toxicity with high reactivity for fast ultraviolet light and electron beam initiated cures at low levels of addition. When blended with the unique chemistry of our SILCOLEASE UV/EB silicone polymer cure systems, and coated using standard solventless coating techniques, these SILCOLEASE UV CATA 221 UV/EB cationic initiator catalyzed formulations are intended for use as release surfaces on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or under electron beam irradiation. See the "SILCOLEASE UV POLY 200 / SILCOLEASEUV RCA 200 / SILCOLEASEUV RCA 251 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM" and "SILCOLEASE UV POLY 235 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM"Technical Data Sheets for a full discussion of Features and Benefits, Formulation Guidelines, Suggested Starting Formulation...voir plus SILCOLEASE UV CATA 221 UV/EB cationic initiator is a 20% solids solution of diaryl iodonium tetrakis (pentafluoro phenyl) borate salt in reactive diluent providing low toxicity with high reactivity for fast ultraviolet light and electron beam initiated cures at low levels of addition. When blended with the unique chemistry of our SILCOLEASE UV/EB silicone polymer cure systems, and coated using standard solventless coating techniques, these SILCOLEASE UV CATA 221 UV/EB cationic initiator catalyzed formulations are intended for use as release surfaces on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or under electron beam irradiation. See the "SILCOLEASE UV POLY 200 / SILCOLEASEUV RCA 200 / SILCOLEASEUV RCA 251 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM" and "SILCOLEASE UV POLY 235 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM"Technical Data Sheets for a full discussion of Features and Benefits, Formulation Guidelines, Suggested Starting Formulations, and Release Performance. voir moins | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...voir plus SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. voir moins | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...voir plus SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. voir moins | |
| SILCOLEASE POLY 358 | Elkem Silicones | SILCOLEASE POLY 358 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, SILCOLEASE POLY 358 is designed for formulating flexibility ...voir plus SILCOLEASE POLY 358 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, SILCOLEASE POLY 358 is designed for formulating flexibility to allow reductions in Pt catalyst and more cost effective process conditions. Blending SILCOLEASE POLY 358 with SILCOLEASE 8560 provides the means to produce optimized coatings to meet a wide variety of application requirements. To complete the Optima coating system, a hydride functional siloxane crosslinker and platinum catalyst are added to the polymer to facilitate the curing reaction. voir moins | |
| SILCOLEASE POLY 355 | Elkem Silicones | SILCOLEASE POLY 355 is a low vinyl content functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, SILCOLEASE POLY 355 is designed for formulating ...voir plus SILCOLEASE POLY 355 is a low vinyl content functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, SILCOLEASE POLY 355 is designed for formulating flexibility to allow reductions in Pt catalyst and more cost effective process conditions. Blending SILCOLEASE POLY 355 with SILCOLEASE POLY 11365 provides the means to produce optimized coatings to meet a wide variety of application requirements. To complete the Optima coating system, a hydride functional siloxane crosslinker and platinum catalyst are added to the polymer to facilitate the curing reaction. voir moins | |
| SILCOLEASE POLY 357 | Elkem Silicones | SILCOLEASE POLY 357 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, Silcolease Poly 357 is designed for formulating flexibility ...voir plus SILCOLEASE POLY 357 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. As part of the Optima system, Silcolease Poly 357 is designed for formulating flexibility to allow reductions in Pt catalyst and more cost effective process conditions. Blending Silcolease Poly 357 with Silcolease Poly 11367 provides the means to produce optimized coatings to meet a wide variety of application requirements. To complete the Optima coating system, a hydride functional siloxane crosslinker and platinum catalyst are added to the polymer to facilitate the curing reaction. voir moins | |
| SILCOLEASE POLY 11367 | Elkem Silicones | SILCOLEASE POLY 11367 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASEPOLY 11367 is mixed at the point of use with a methyl hydrogen siloxane cross...voir plus SILCOLEASE POLY 11367 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASEPOLY 11367 is mixed at the point of use with a methyl hydrogen siloxane crosslinker and a platinum catalyst. voir moins | |
| SILCOLEASE POLY 8560 U1 | Elkem Silicones | SILCOLEASE POLY 8560 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASE POLY 8560 is mixed at the point of use with a hydride functionalsiloxane cross...voir plus SILCOLEASE POLY 8560 is a vinyl functional silicone polymer which when properly formulated and cured produces a crosslinked coating with adhesive release properties. SILCOLEASE POLY 8560 is mixed at the point of use with a hydride functionalsiloxane crosslinker and platinum catalyst to facilitate the curing reaction. voir moins | |
| SILCOLEASE POLY 353 | Elkem Silicones | SILCOLEASE POLY 353 is a specialized silicone fluid which, whenproperly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. This thermally cured solventless product is designed for formulating reduced Pt systems pro...voir plus SILCOLEASE POLY 353 is a specialized silicone fluid which, whenproperly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. This thermally cured solventless product is designed for formulating reduced Pt systems providing a low coefficient of friction surface comparable to that of condensation cure solvent silicones. voir moins | |
| SILCOLEASE PC-675 | Elkem Silicones | SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits very low polarity and surface tension more akin to high molecular weight di-methyl silicones. When blended at levels of 1-6% into the SILCOLEASE UV POLY 200 UV/EB silicone polymer release coating system, it effectively acts as a low releaseControlledReleaseAdditive (CRA-minus). It also cuts both dynamic (Kd) and static (Ks) coefficients of friction, up to 50% compared with standard UV Premium Release formulation...voir plus SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits very low polarity and surface tension more akin to high molecular weight di-methyl silicones. When blended at levels of 1-6% into the SILCOLEASE UV POLY 200 UV/EB silicone polymer release coating system, it effectively acts as a low releaseControlledReleaseAdditive (CRA-minus). It also cuts both dynamic (Kd) and static (Ks) coefficients of friction, up to 50% compared with standard UV Premium Release formulations. SILCOLEASE PC-675 modified silicone release chemistries result in smoother coatings with often dramatically reduced release zippiness against very aggressive adhesives. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. voir moins | |
| SILCOLEASE UV CATA 102 | Elkem Silicones | SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings. It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substr...voir plus SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings. It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substrates, providing release properties against a wide range of adhesive materials. Curing of the coating by UV radiation is rapid and efficient, resulting in stable release performance and excellent anchorage to the substrate. Typical addition level is 3% SILCOLEASE UV CATA 102 by weight on the total formulated bath. voir moins | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...voir plus SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. voir moins | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...voir plus SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. voir moins | |
| SILCOLEASE POLY 356 | Elkem Silicones | SILCOLEASE POLY 356 polymer is a vinyl functional silicone fluid which, when properly catalyzed and cured, gives a semi-flexible crosslinked coating with premium release properties. As part of the Optima system, SILCOLEASE POLY 356 is designed for formula...voir plus SILCOLEASE POLY 356 polymer is a vinyl functional silicone fluid which, when properly catalyzed and cured, gives a semi-flexible crosslinked coating with premium release properties. As part of the Optima system, SILCOLEASE POLY 356 is designed for formulating flexibility to allow reduction in Pt catalyst and more cost effective process conditions. The simplest SILCOLEASE POLY 356 release coating system comprises the vinyl silicone polymer, a methyl hydrogen siloxane crosslinker and a platinum catalyst. The resulting addition reaction is very rapid, and, therefore, an inhibitor is included to provide bath stability at ambient conditions while allowing rapid cures at elevated temperatures. voir moins | |
| SILCOLEASE UV ADD 152 U1 | Elkem Silicones | SILCOLEASE UV ADD 152 is a 100% reactive multifunctional acrylate adhesion promoter for use with free radical UV cure silicone acrylate release coatings. It is designed for use with our SILCOLEASEUV POLY 110/UV RCA 170 release chemistry for coating onto ...voir plus SILCOLEASE UV ADD 152 is a 100% reactive multifunctional acrylate adhesion promoter for use with free radical UV cure silicone acrylate release coatings. It is designed for use with our SILCOLEASEUV POLY 110/UV RCA 170 release chemistry for coating onto a broad range of paper and film substrates, providing release properties against a wide range of adhesive materials. Curing of the coating by UV radiation is rapid and efficient, resulting in stable release performance and excellent anchorage to the substrate. Typical addition level of SILCOLEASE UV ADD 152 is up to 10% by weight based on the total formulated bath. voir moins | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...voir plus SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. voir moins | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...voir plus SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. voir moins | |
| SILCOLEASE PC-850 | Elkem Silicones | SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...voir plus SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. voir moins | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...voir plus SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. voir moins | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...voir plus BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. voir moins |
