UL Prospector
Prospector

Succès!

Vous avez enregistré votre recherche avec succès

Clariant– Paints & Coatings

Visit Company Website
Clariant– Paints & Coatings offers a broad range of ingredients for each step of the paints & coatings value chain, including low VOC and label-free additives for architectural paints and colorants, APEO-free emulsifiers for the emulsion polymerization and specialty intermediates for the synthesis of paint additives. The portfolio includes among others wetting and dispersing agents, compatibilizers, stabilizers, neutralizing agents, humectants, silver biocides, emulsifiers and process aids.
153 Résultats
Diethylene Glycol Dibutyl Ether Clariant International Ltd. Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...voir plus Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. voir moins
Diethylene Glycol Dimethyl Ether Clariant International Ltd. Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chem...voir plus Diethylene Glycol Dimethyl Ether is a neutral, slightly volatile, colorless liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and all common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Diethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions and for polymerizations. voir moins
Dipropylene Glycol Dimethyl Ether Clariant International Ltd. Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...voir plus Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. voir moins
Dispersogen® 145 Clariant International Ltd. Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...voir plus Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. voir moins
Dispersogen® 1728 Clariant International Ltd. Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...voir plus Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. voir moins
Dispersogen® 2774 Clariant International Ltd. Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...voir plus Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. voir moins
Dispersogen® 3169 Clariant International Ltd. Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...voir plus Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. voir moins
Dispersogen® 4387 Clariant International Ltd. Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...voir plus Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. voir moins
Dispersogen® AN 100 Clariant International Ltd. Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...voir plus Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. voir moins
Dispersogen® AN 200 Clariant International Ltd. Dispersogen® AN 200 is an anionic dispersing agent for universal pigment preparations. It is able to disperse organic and inorganic pigments and suitable for label-free point-of-sales colorants and in-plant tinters.
Dispersogen® C 4020 Clariant International Ltd. Dispersogen® C 4020 is a dispersing agent for inorganic pigments.
Dispersogen® ECS Clariant International Ltd. Dispersogen® ECS is used as an anionic dispersing agent in universal pigment preparations (i.e. waterborne and solvent-borne). The product is able to disperse organic pigments and is suitable for label free in-plant tinters.
Dispersogen® FA Clariant International Ltd. Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...voir plus Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. voir moins
Dispersogen® FSE Clariant International Ltd. Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...voir plus Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. voir moins
Dispersogen® LEC Clariant International Ltd. Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...voir plus Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. voir moins
Dispersogen® LFH Clariant International Ltd. Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...voir plus Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. voir moins
Dispersogen® LFS Clariant International Ltd. Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an an...voir plus Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an anionic AP-free dispersing agent and used for water-based, solvent-based or water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. voir moins
Dispersogen® LKS Clariant International Ltd. Dispersogen® LKS is a universal dispersing agent for organic and inorganic pigments.
Dispersogen® MT 200 Clariant International Ltd. Dispersogen® MT 200 is a non-ionic dispersing agent based on renewable feedstock and with low VOC content. It is suitable for waterborne pigment preparations based on organic or inorganic pigments.
Dispersogen® PCE Clariant International Ltd. Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...voir plus Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. voir moins
Dispersogen® PL 30 Clariant International Ltd. Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes.
Dispersogen® PL 40 Clariant International Ltd. Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...voir plus Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. voir moins
Dispersogen® PLF 100 Clariant International Ltd. Dispersogen® PLF 100 is a dispersing agent for organic and selected inorganic pigments in waterborne pigment preparations. It leads to good viscosity reduction, excellent colour strengths and storage stabilities.
Dispersogen® PTS Clariant International Ltd. Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...voir plus Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. voir moins
Dispersogen® SP Plus Clariant International Ltd. Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comp...voir plus Dispersogen® SP Plus is a stabilizer and dispersant in organosilicate paints which contain up to 10% water glass (28% active potassium silicate). It improves the viscosity profile of the formulation and thereby helps to achieve application properties comparable to those of dispersion paints. This product increases formulation options as the paints rheology profile can be further adjusted post-production by using additional rheology additives. voir moins
Dispersogen® SPG Clariant International Ltd. Dispersogen® SPG is a stabilizer for silicate/organosilicate paints based on renewables.
Dispersogen® SPS Clariant International Ltd. Dispersogen® SPS is a quaternary ammonium compound used as a dispersing agent and stabilizer for silicate paints. It prevents precipitates of silicate in silicate paints, and prolongs the shelf life of silicate paints.
Dispersogen® SPV Clariant International Ltd. Dispersogen® SPV is a dispersing agent and stabilizer for silicate paints. It controls the viscosity behaviour of silicate paints.
Dispersogen® TAS Clariant International Ltd. Dispersogen® TAS is a universal dispersing agent for inorganic pigments.
Dispersogen® UDN Clariant International Ltd. Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...voir plus Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. voir moins
Emulsogen® 4084 Clariant International Ltd. Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...voir plus Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. voir moins
Emulsogen® APS 100 Clariant International Ltd. Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantage...voir plus Emulsogen® APS 100 is a copolymerizable anionic emulsifier and hydrophilic monomer. It is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions. The advantages of Emulsogen® APS 100 in comparison to conventional emulsifiers are the ability of copolymerisation to reduce migration, improved freeze- thaw, electrolyte and shear stability of the polymer emulsion and reduced water sensitivity and water up-take of the polymer film. voir moins
Emulsogen® EPA 073 Clariant International Ltd. Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...voir plus Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. voir moins
Emulsogen® EPA 1954 Clariant International Ltd. Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...voir plus Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. voir moins
Emulsogen® EPN 118 Clariant International Ltd. Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene.
Emulsogen® EPN 217 Clariant International Ltd. Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...voir plus Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. voir moins
Emulsogen® EPN 287 Clariant International Ltd. Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...voir plus Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. voir moins
Emulsogen® EPN 407 Clariant International Ltd. Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...voir plus Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. voir moins
Emulsogen® FT Clariant International Ltd. Emulsogen® FT is an anionic emulsifier and post additive for freeze-thaw stable polymer latexes.
Emulsogen® LCN 070 Clariant International Ltd. Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...voir plus Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. voir moins
Emulsogen® LCN 088 Clariant International Ltd. Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...voir plus Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. voir moins
Emulsogen® LCN 118 Clariant International Ltd. Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...voir plus Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. voir moins
Emulsogen® LCN 158 Clariant International Ltd. Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...voir plus Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. voir moins
Emulsogen® LCN 217 Clariant International Ltd. Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...voir plus Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. voir moins
Emulsogen® LCN 287 Clariant International Ltd. Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...voir plus Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. voir moins
Emulsogen® LCN 407 Clariant International Ltd. Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...voir plus Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. voir moins
Emulsogen® PF 20 S Clariant International Ltd. Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...voir plus Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. voir moins
Emulsogen® SF 8 Clariant International Ltd. Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...voir plus Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. voir moins
Emulsogen® TS 100 Clariant International Ltd. Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any addition...voir plus Emulsogen® TS 100 is a nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings. It is composed of Tristyrylphenol-Polyglycolether with approximately 10 moles ethylene oxide. This product is free of any additional biocide. Emulsogen® TS 100 has a HLB value of about 10 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 100 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. It improves the compatibility of pigments and minerals with polymers and binders. This product also improves the shelf life and stability of emulsion paints. voir moins
Emulsogen® TS 200 Clariant International Ltd. Emulsogen® TS 200 is a dispersing agent suitable for a broad range of organic pigments, including carbon blacks in waterborne pigment preparations.
Genagen® COA Clariant International Ltd. Genagen® COA is a new non-VOC coalescing agent for the effective reduction of minimal film formation temperature (MFFT) without impacting viscosity. Label-free and for all kinds of paints binders used in diverse decorative coatings applications.
Genamin® D 01/2000 Clariant International Ltd. Genamin® D 01/2000 is a diamine based on polypropylene glycol with an average molecular mass of 2000 g/mol. Genamin® D 01/2000 contains terminal primary amine groups which can undergo all typical amine reactions.
Genamin® Gluco 50 Clariant International Ltd. Genamin® Gluco 50 is a renewable-based, VOC/SVOC-free and label-free neutralizing agent for waterborne paints. It improves storage stability as well as compatibility with pigments and reduces flash-rust formation.
Genamin® M 41/2000 Clariant International Ltd. Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventio...voir plus Genamin® M 41/2000 is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. This product is also available as Genamin® M 41/2000 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 72.8%. voir moins
Genamin® M 41/2000 Terra Clariant International Ltd. Genamin® M 41/2000 Terra is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. Genamin® M 41/2000 Terra provides the same performance as its conventional (no Terra) counterpart. As...voir plus Genamin® M 41/2000 Terra is an amine based on a statistical polyethylene/polypropylene glycol co polymer with an average molecular mass of 2000 g/mol. Genamin® M 41/2000 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 72.8%. voir moins
Genapol® B Clariant International Ltd. Genapol® B is a high-molecular-weight polyalkylene glygol used as a compatibilizer for waterborne emulsion paints.
Genapol® ED 3060 Clariant International Ltd. Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...voir plus Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. voir moins
Genapol® O 080 Clariant International Ltd. Genapol® O 080 is a liquid to pasty fatty alcohol polyglycol ether non-ionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers.
Genapol® O 100 Clariant International Ltd. Genapol® O 100 is a pasty fatty alcohol polyglycol ether nonionic surfactant for the detergent industry. Applications include wetting agents, dispersing agents, special cleaning agents, industrial cleaning agents, and emulsifiers.
Genapol® PF 20 Clariant International Ltd. Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...voir plus Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. voir moins
Genapol® PF 40 Clariant International Ltd. Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...voir plus Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. voir moins
Genapol® X 080 Clariant International Ltd. Genapol® X 080 is a colourless, slightly cloudy liquid isotridecyl alcohol polyglycol ether nonionic surfactant for the detergent industry. Applications include cleaners for the technical sector, textile industry, metal industry, and paper industry.
Genapol® X 100 Clariant International Ltd. Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...voir plus Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. voir moins
Genapol® X 100 Terra Clariant International Ltd. Genapol® X 100 Terra is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon ...voir plus Genapol® X 100 Terra is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. Genapol® X 100 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 61.7%. voir moins
Genapol® X 1003 Clariant International Ltd. Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...voir plus Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. voir moins
Genapol® X 1005 Clariant International Ltd. Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...voir plus Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. voir moins
Genapol® X 150 Clariant International Ltd. Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...voir plus Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. voir moins
Genapol® X 307 Clariant International Ltd. Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...voir plus Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. voir moins
Genapol® X 407 Clariant International Ltd. Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw st...voir plus Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. This product is also available as Genapol® X 407 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 86%. voir moins
Genapol® X 407 Terra Clariant International Ltd. Genapol® X 407 Terra is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 Terra in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and fr...voir plus Genapol® X 407 Terra is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 Terra in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. Genapol® X 407 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 86%. voir moins
Hostaphat® 1306 Clariant International Ltd. Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion ...voir plus Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion polymerization, 0,5 – 1,5 % on monomers; as dispersing agent for pigments in aqueous dispersions, 10 – 30 % on pigments; and as wetting agent and detergents in vehicle and metal cleaning and textile finishing processes, general recommendation: 1 – 3 g/l. voir moins
Hostaphat® 1308 K Clariant International Ltd. Hostaphat® 1308 K is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used as an emulsifier in emulsion polymerization.
Hostaphat® 1309 Terra Clariant International Ltd. Hostaphat® 1309 Terra is used in emulsion polymerization, it has to be neutralized, before use, dose rate 0,5-1,5%. Hostaphat® 1309 Terra is preferred used for acrylic and styrene acrylic polymers. Hostaphat® 1309 Terra provides the same performance as i...voir plus Hostaphat® 1309 Terra is used in emulsion polymerization, it has to be neutralized, before use, dose rate 0,5-1,5%. Hostaphat® 1309 Terra is preferred used for acrylic and styrene acrylic polymers. Hostaphat® 1309 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 58.1%. voir moins
Hostapur® OS Liquid Clariant International Ltd. Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characterist...voir plus Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characteristics. The foam quality is excellent with high stability. It is used in the production of detergents and cleaning agents. It is particularly suitable for the use in foam cleaners for upholstery and carpets, because of the low stickiness of the residues left on the fiber. Hostapur® OS liquid is also used in the textile, leather and construction industry as a wetting agent, detergent and foaming agent. It is used as an emulsifier in emulsion polymerization of styrene / butadiene latex, styrene / butadiene rubber and acrylate and styrene / acrylate dispersions. voir moins
JMAC Composite PG Clariant International Ltd. JMAC Composite PG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC Composite PG is a powder. JMAC Composite PG is effective...voir plus JMAC Composite PG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC Composite PG is a powder. JMAC Composite PG is effective against bacteria, fungi and yeast. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. voir moins
JMAC LP 10 Clariant International Ltd. JMAC LP 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 10 is a liquid product. It is effective against bacteria, fungi...voir plus JMAC LP 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 10 is a liquid product. It is effective against bacteria, fungi and yeast. JMAC LP 10 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. voir moins
JMAC S 10 Clariant International Ltd. JMAC S 10 is used as an antimicrobial agent with low toxicity in non aqueous based applications.
Monoethylene Glycol Dimethyl Ether Clariant International Ltd. Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its ch...voir plus Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Monoethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions (e.g. Suzuki-coupling, Simmons-Smith-reactions, Grignard reactions) and for polymerizations. Because of its aprotic nature and low viscosity 1,2-Dimethyoxyethane is also used as electrolytic solvent for lithium batteries (in combination with other solvents). voir moins
Polyglycol AB/25-8 Clariant International Ltd. Polyglycol AB/25-8 is a colorless to slightly yellow, viscous, non-toxic liquid with a mild odor. It is a statistical copolymer of about 25 moles EO and 8 moles PO with allyl and butyl endcapping.
Polyglycol AM 1100 Clariant International Ltd. Polyglycol AM 1100 is ethoxylated and end capped with an allyl and a methyl group. It is a waxy solid.
Polyglycol AM 250 Clariant International Ltd. Polyglycol AM 250 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid.
Polyglycol AM 350 Clariant International Ltd. Polyglycol AM 350 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid.
Polyglycol AM 450 Clariant International Ltd. Polyglycol AM 450 is ethoxylated and end capped with an allyl and a methyl group. It is a low-viscous liquid.
Polyglycol BB 300 Clariant International Ltd. Polyglycol BB 300 is a clear, neutral, colorless to light yellowish liquid with a characteristic odor. It is miscible with ethanol, acetone, benzene, ether and chlorinated hydrocarbons in any ratio and forms a clear solution. Polyglycol BB 300 has a high ...voir plus Polyglycol BB 300 is a clear, neutral, colorless to light yellowish liquid with a characteristic odor. It is miscible with ethanol, acetone, benzene, ether and chlorinated hydrocarbons in any ratio and forms a clear solution. Polyglycol BB 300 has a high boiling point, relatively low freezing range and low viscosity. voir moins
Polyglykol 1000 Clariant International Ltd. Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutic...voir plus Polyglykol 1000 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1000 is a white waxy solid at room temperature. Its two hydroxy end groups as well as its ether groups mainly control the physical and chemical properties of Polyglykol 1000. voir moins
Polyglykol 10000 FL Clariant International Ltd. Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...voir plus Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL can be supplied as melt in heated tank trucks, and it has a molecular weight of 9000-11250g/mol. This grade melt also has to be stored under a nitrogen blanket at 60-80°C. Storage time of the melt shall not exceed 2-3 month. This product is also available as Polyglykol 10000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. voir moins
Polyglykol 10000 FL Terra Clariant International Ltd. Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and...voir plus Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. voir moins
Polyglykol 10000 P Clariant International Ltd. Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 10000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 P is a powdered type, and it has a molecular weight of 9000-11250g/mol. voir moins
Polyglykol 10000 S Clariant International Ltd. Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 10000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 S is a flaked type, and it has a molecular weight of 9000-11250g/mol. voir moins
POLYGLYKOL 10000 SG VITA Clariant International Ltd. POLYGLYKOL 10000 SG VITA is a white solid at room temperature. It is soluble in water and polar organic solvents like acetone or methanol. The product is insoluble in pure hydrocarbons. It shows typical chemical reactions of alcohols/diols and a very low ...voir plus POLYGLYKOL 10000 SG VITA is a white solid at room temperature. It is soluble in water and polar organic solvents like acetone or methanol. The product is insoluble in pure hydrocarbons. It shows typical chemical reactions of alcohols/diols and a very low evaporation rate. voir moins
Polyglykol 12000 P Clariant International Ltd. Polyglykol 12000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 12000 P is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 12000 P is a powdered type available in 25 kg (P) bags or super sacs with up to 500 kg capacity. voir moins
Polyglykol 12000 S Clariant International Ltd. Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 12000 S is a flaked type. voir moins
Polyglykol 1500 FL Clariant International Ltd. Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL can be supplied in heated tank trucks. This product is also available as Polyglykol 1500 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. voir moins
Polyglykol 1500 FL PU Clariant International Ltd. Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharma...voir plus Polyglykol 1500 FL PU is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL PU can be supplied in heated tank trucks. voir moins
Polyglykol 1500 FL Terra Clariant International Ltd. Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and ...voir plus Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL Terra can be supplied in heated tank trucks. Polyglykol 1500 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. voir moins
Polyglykol 1500 M70 Clariant International Ltd. Polyglykol 1500 M70 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...voir plus Polyglykol 1500 M70 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. On request a water based dilution with 70 % Polyglykol 1500 M70 is available. The solidification point of Polyglykol 1500 M 70 is about 8 °C. voir moins
Polyglykol 1500 PS Clariant International Ltd. Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 1500 PS is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 PS can be supplied in heated tank trucks. voir moins
Polyglykol 1500 S Clariant International Ltd. Polyglykol 1500 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceut...voir plus Polyglykol 1500 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 S is a flaked type available in 20 kg bags or super sacs with up to 500 kg capacity. voir moins
Polyglykol 200 LVC Clariant International Ltd. Polyglykol 200 LVC retards the drying of pigment pastes and forms a soluble film of the pigment preparation. Polyglykol 200 LVC prevents the clogging of the nozzles of tinting systems and metering machines.
Polyglykol 2000 FL Clariant International Ltd. Polyglykol 2000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...voir plus Polyglykol 2000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 2000 FL can be supplied in heated tank trucks, and it has a molecular weight of 1800 – 2200g/mol. voir moins