| WorléeKyd RM 232 | Worlée-Chemie G.m.b.H. | WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is us...voir plus WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is used in conjunction with reactive unmodified urea and/or melamine resins for stoving primers, top coats and one coat paints. voir moins | |
| WorléeKyd RS 2174 | Worlée-Chemie G.m.b.H. | WorléeKyd RS 2174 is a combination resin for other alkyd resins. It improves epentration, decreases viscosity, and provides VOC reduction. This product is applied as a sole binder for wood care and coating products. | |
| WorléeKyd S 3001 | Worlée-Chemie G.m.b.H. | WorléeKyd S 3001 is a short oil, fast drying, low viscous alkyd resin based on drying, vegetable fatty acids for the manufacture of air drying low VOC industrial primers and top coats. This grade has a non volatile content of 75% ± 1. | |
| WorléeKyd S 351 (60% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatibl...voir plus WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. voir moins | |
| WorléeKyd S 351 NV NV | Worlée-Chemie G.m.b.H. | WorléeKyd S 351 NV NV is a medium oil length, with soya oil modified airdrying alkyd resin particularly for the manufacture of fillers with structural viscosity for brushing, primer surfacers and semi-gloss and flat wall paints. This grade has a non volat...voir plus WorléeKyd S 351 NV NV is a medium oil length, with soya oil modified airdrying alkyd resin particularly for the manufacture of fillers with structural viscosity for brushing, primer surfacers and semi-gloss and flat wall paints. This grade has a non volatile content of 60% ± 1. Also, at high p.v.c. good film flow is obtained. Although the drying is quick, the film remains open long enough for painting large surfaces. voir moins | |
| WorléeKyd S 351(50% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%....voir plus WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. voir moins | |
| WorléeKyd S 351(50% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible wi...voir plus WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. voir moins | |
| WorléeKyd S 5101 | Worlée-Chemie G.m.b.H. | WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and...voir plus WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 5101 is partially compatible with low viscous stand oils. voir moins | |
| WorléeKyd S 549 (55% In White Spirit 135-175) | Worlée-Chemie G.m.b.H. | WorléeKyd S 549 (55% In White Spirit 135-175) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is comp...voir plus WorléeKyd S 549 (55% In White Spirit 135-175) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is compatible with most medium and long oil air drying alkyd resins. voir moins | |
| WorléeKyd S 549 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a me...voir plus WorléeKyd S 549 (55% In White Spirit 145-195) is a low viscous, medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, and machine paints, as well as in fast drying do-it-yourself and radiator paints. W´Kyd S 549 is a medium fatty alkyd resin for universal use. Due to the good properties like fast drying, gloss retention and good weather resistance, high quality industrial, vehicle, car body, dipping and flow coat paints as well as do-it-yourself and radiator paints can be produced. voir moins | |
| WorléeKyd S 5703 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majori...voir plus WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. voir moins | |
| WorléeKyd S 5703 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ...voir plus WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ± 1. Varnishes based on W´Kyd S 5703 are fast drying with a high degree of hardness and good gloss. voir moins | |
| WorléeKyd S 6003 (50% Iin Isoparaffinic HC 150-180) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (50% In Isoparaffinic HC 150-180) is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats.. This grade has a non volat...voir plus WorléeKyd S 6003 (50% In Isoparaffinic HC 150-180) is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats.. This grade has a non volatile content of 50% ± 1. voir moins | |
| WorléeKyd S 6003 (51% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile...voir plus WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 51% ± 1. W´Kyd S 6003 is compatible with the majority of medium and long oil types air-drying alkyd resins and with nearly all maleic and phenolic modified hard resins. voir moins | |
| WorléeKyd S 6003 hv | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S ...voir plus WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S 6003 hv is compatible with the majority of medium and long oil types air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. voir moins | |
| WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially sui...voir plus WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially suitable for the manufacture of consumption, exterior quality house, do-it-yourself and anticorrosive paints. voir moins | |
| WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially sui...voir plus WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially suitable for the manufacture of consumption, exterior quality house, do-it-yourself and anticorrosive paints. voir moins | |
| WorléeKyd S 7304 | Worlée-Chemie G.m.b.H. | WorléeKyd S 7304 is a low viscosity soya oil-based alkyd resin. It is used for the production of high solid paint systems. W´Kyd S 7304 is compatible with most air-drying medium and long oil alkyd resins. It is particularly suitable for the manufacturing ...voir plus WorléeKyd S 7304 is a low viscosity soya oil-based alkyd resin. It is used for the production of high solid paint systems. W´Kyd S 7304 is compatible with most air-drying medium and long oil alkyd resins. It is particularly suitable for the manufacturing of high solid glazings, clear lacquers and high solid anticorrosion primers. voir moins | |
| WorléeKyd SB 6401 | Worlée-Chemie G.m.b.H. | WorléeKyd SB 6401 is a low viscous, long oil air drying alkyd resin for the production of low VOC decorative and house paints. It's oil type is special vegetable fatty acids. WorléeKyd SB 6401 have 90% non-volatile content. | |
| WorléeKyd SB 6401 (VP-W 1886/07) | Worlée-Chemie G.m.b.H. | WorléeKyd SB 6401 (VP-W 1886/07) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. This products flow time in 70% dearomat. is 60-80 s. W´Kyd SB 6401 is well soluble in aromatic and aliphatic hydr...voir plus WorléeKyd SB 6401 (VP-W 1886/07) is a low viscous, long oil air-drying alkyd resin for the production of low VOC decorative and house paints. This products flow time in 70% dearomat. is 60-80 s. W´Kyd SB 6401 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits and isoparaffines. voir moins | |
| WorléeKyd SC 965 | Worlée-Chemie G.m.b.H. | WorléeKyd SC 965 is a long oil alkyd resin produced from special fatty acids and used for high quality decorative and building paints. It is compatible with the most medium and long oil airdrying alkyd resins. This product is also compatible with conventi...voir plus WorléeKyd SC 965 is a long oil alkyd resin produced from special fatty acids and used for high quality decorative and building paints. It is compatible with the most medium and long oil airdrying alkyd resins. This product is also compatible with conventional maleic and phenolic modified hard resins. W´Kyd SC 965 is especially suitable for the production of high quality decorative and building paints, which stand out for their very good properties as brushability, flow, film build and high gloss. voir moins | |
| WorléeKyd SD 6403 | Worlée-Chemie G.m.b.H. | WorléeKyd SD 6403 is a urethane modified long oil alkyd resin used for the manufacture of interior and exterior wood varnishes for floors, furniture, panelings and yacht finishes. It is also recommended as a binder for high quality fast drying primers and...voir plus WorléeKyd SD 6403 is a urethane modified long oil alkyd resin used for the manufacture of interior and exterior wood varnishes for floors, furniture, panelings and yacht finishes. It is also recommended as a binder for high quality fast drying primers and topcoats with good gloss and gloss retention.This grade has a non volatile content of 55% ± 1. voir moins | |
| WorléeKyd SD 7003 | Worlée-Chemie G.m.b.H. | WorléeKyd SD 7003 is a low viscous, long oil air drying alkyd resin for the production of low VOC decorative and house paints. This grade has a non volatile content of 85% ± 1. W´Kyd SD 7003 is well soluble in aromatic and aliphatic hydrocarbons and in de...voir plus WorléeKyd SD 7003 is a low viscous, long oil air drying alkyd resin for the production of low VOC decorative and house paints. This grade has a non volatile content of 85% ± 1. W´Kyd SD 7003 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits and isoparaffines. voir moins | |
| WorléeKyd SH 380 (70% In Butyl Acetate) | Worlée-Chemie G.m.b.H. | WorléeKyd SH 380 (70% In Butyl Acetate) is a short oil alkyd for use in conjunction with amino resins in very rapid curing acid catalyzed finishes. This grade has a non volatile content of 70% ± 1. W´Kyd SH 380 is intended for use in conjunction with unmo...voir plus WorléeKyd SH 380 (70% In Butyl Acetate) is a short oil alkyd for use in conjunction with amino resins in very rapid curing acid catalyzed finishes. This grade has a non volatile content of 70% ± 1. W´Kyd SH 380 is intended for use in conjunction with unmodified urea formaldehyde resins in the ratio 65 : 35 or 70 : 30 (calculated on resin solids) for high quality, rapid curing acid catalyzed finishes with good elasticity and relatively long pot life. W´Kyd SH 380 is suitable both for acid catalyzed finishes to be cured at room temperature and for force drying finishes. voir moins | |
| WorléeKyd SM 340 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 340 is a short oil, very quick drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. W´Kyd SM 340 is compatible with most short and medium oil drying alkyds and with long oil drying alkyds up to 60 % oil ...voir plus WorléeKyd SM 340 is a short oil, very quick drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. W´Kyd SM 340 is compatible with most short and medium oil drying alkyds and with long oil drying alkyds up to 60 % oil content. W´Kyd SM 340 is a modern, generally proposed alkyd resin with very good drying properties for primers and top coats. It is specially developed for quick drying primers and industrial finishes with good elasticity. The good gloss stability and weather resistance have to be stressed. voir moins | |
| WorléeKyd SM 400 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 400 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. This product is based on vegetable fatty acids. W´Kyd SM 400 is compatible with most short oil and some medium oil lengt...voir plus WorléeKyd SM 400 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. This product is based on vegetable fatty acids. W´Kyd SM 400 is compatible with most short oil and some medium oil length alkyd resins. voir moins | |
| WorléeKyd SM 426 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil le...voir plus WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil length alkyd resins. W´Kyd SM 426 is also compatible with the most usual butylated and iso butylated urea and melamine resins as well as with resin esters, maleic resins and modified phenolic resins. voir moins | |
| WorléeKyd SM 433 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and wi...voir plus WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and with some medium oil types. It is partially compatible with vinyl mixed polymerisates, e. g. Laroflex, BASF. voir moins | |
| WorléeKyd SO 554 | Worlée-Chemie G.m.b.H. | WorléeKyd SO 554 is a medium oil, fast drying alkyd resin for air drying industrial, vehicle, and machine paints, as well as for odor and dearomatized do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1. | |
| WorléeKyd T 735 | Worlée-Chemie G.m.b.H. | WorléeKyd T 735 is a medium viscous, very reactive stoving alkyd resin used for the manufacture of high quality industrial paints. This product is designed for stoving enamels with excellent gloss and high hardness as well as good elasticity and adhesion. | |
| WorléeKyd T 768 | Worlée-Chemie G.m.b.H. | WorléeKyd T 768 is a long oil, air drying alkyd resin, produced from tall oil fatty acids. This grade has a non volatile content of 75% ± 1. W´Kyd T 768 is especially suitable for the manufacturing of decorative, do-it-yourself and anticorrosive paints. | |
| WorléeKyd T 7800 | Worlée-Chemie G.m.b.H. | WorléeKyd T 7800 is a low viscous, air drying, long oil alkyd resin for the production of low VOC decorative and house paints. W´Kyd T 7800 is soluble in aromatic and aliphatic hydrocarbons as well as in dearomatized white spirit and isoparaffins. | |
| WorléeKyd TT 3502 | Worlée-Chemie G.m.b.H. | WorléeKyd TT 3502 is a short oil, fast drying, low viscous alkyd resin based on drying, vegetable fatty acids for the manufacture of air drying low VOC industrial primers and top coats. This grade has a non volatile content of 80% ± 1. | |
| WorléeKyd V 162 | Worlée-Chemie G.m.b.H. | WorléeKyd V 162 is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, machinery, and radiator paints. This grade has a non volatile content of 55% ± 1. W´Kyd V 162 is compatible with many short and medium oil alkyd...voir plus WorléeKyd V 162 is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, vehicle, machinery, and radiator paints. This grade has a non volatile content of 55% ± 1. W´Kyd V 162 is compatible with many short and medium oil alkyd resins. voir moins | |
| WorléeKyd V 162 NV | Worlée-Chemie G.m.b.H. | WorléeKyd V 162 NV is used in extremely fast drying car refinishing, machinery, and industrial paints with high gloss and good through drying. This grade has a non volatile content of 60% ± 1. | |
| WorléeKyd V 298 | Worlée-Chemie G.m.b.H. | WorléeKyd V 298 is a short oil, fast drying alkyd resin used for the manufacture of air drying base and top coats with low aromate content. W´Kyd V 298 is compatible with short oil and some medium oil alkyd resins. W´Kyd V 298 is especially suitable for t...voir plus WorléeKyd V 298 is a short oil, fast drying alkyd resin used for the manufacture of air drying base and top coats with low aromate content. W´Kyd V 298 is compatible with short oil and some medium oil alkyd resins. W´Kyd V 298 is especially suitable for the manufacture of xylene free fast drying anti corrosion primers and industrial paints. Anti corrosion primers based on WorléeKyd V 298 show especially good drying properties and corrosion resistance. voir moins | |
| WorléeKyd V 5241 U | Worlée-Chemie G.m.b.H. | WorléeKyd V 5241 U is a low viscosity oil modified polyurethane used for the production of high solid, more environmentally friendly paint systems. W´Kyd V 5241 U is compatible with most air drying medium and long oil alkyd resins. This product is particu...voir plus WorléeKyd V 5241 U is a low viscosity oil modified polyurethane used for the production of high solid, more environmentally friendly paint systems. W´Kyd V 5241 U is compatible with most air drying medium and long oil alkyd resins. This product is particularly suitable for the manufacturing of preservative impregnation for wood and wood preservative glazing paint. voir moins | |
| WorléeKyd V 543 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd V 543 (55% In White Spirit 145-195) is a medium oil, fast drying alkyd resin for use in air and force drying industrial, machinery, and car repair paints. It is also used in fast drying do-it-yourself and radiator paints. This grade has a non vo...voir plus WorléeKyd V 543 (55% In White Spirit 145-195) is a medium oil, fast drying alkyd resin for use in air and force drying industrial, machinery, and car repair paints. It is also used in fast drying do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1. voir moins | |
| WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) | Worlée-Chemie G.m.b.H. | WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, machinery, and car repair paints. It is also used for fast drying do-it-yourself and radiator paints. This grade ha...voir plus WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) is a medium oil, fast drying alkyd resin for use in air and forced drying industrial, machinery, and car repair paints. It is also used for fast drying do-it-yourself and radiator paints. This grade has a non volatile content of 55% ± 1. This product has good gloss, yellowing resistance, and good compatibility with other resins. voir moins | |
| WorléePol® 1181/03 | Worlée-Chemie G.m.b.H. | WorléePol® 1181/03 is a saturated, low viscous polyester resin for the manufacture of solvent-based and aqueous 2 component PUR systems showing high elasticity, surface hardness, and resistance to chemicals. Normally this polyester resin is used as a modi...voir plus WorléePol® 1181/03 is a saturated, low viscous polyester resin for the manufacture of solvent-based and aqueous 2 component PUR systems showing high elasticity, surface hardness, and resistance to chemicals. Normally this polyester resin is used as a modifying component for isocyanate- and amino crosslinking coatings for solvent based as well as for aqueous systems. voir moins | |
| WorléePol® 1181/09 | Worlée-Chemie G.m.b.H. | WorléePol® 1181/09 is a saturated, low viscous aliphatic polyester resin for the manufacture of solvent-based and aqueous 2 component PUR systems showing high elasticity, surface hardness, and resistance to chemicals. Normally this polyester resin is used...voir plus WorléePol® 1181/09 is a saturated, low viscous aliphatic polyester resin for the manufacture of solvent-based and aqueous 2 component PUR systems showing high elasticity, surface hardness, and resistance to chemicals. Normally this polyester resin is used as a modifying component for high quality aqueous and solvent based isocyanate- and amino crosslinking coatings. voir moins | |
| WorléePol® 165 | Worlée-Chemie G.m.b.H. | WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechan...voir plus WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. voir moins | |
| WorléePol® 191 | Worlée-Chemie G.m.b.H. | WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and ve...voir plus WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and very good flexibility. voir moins | |
| WorléePol® 194 | Worlée-Chemie G.m.b.H. | WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mech...voir plus WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation of non-yellowing, high gloss top coats with good resistance to chemicals. voir moins | |
| WorléePol® 230 | Worlée-Chemie G.m.b.H. | WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical we...voir plus WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. Adding W´Pol 230 to systems based on W´Pol 165 results in better mechanical and chemical resistance. voir moins | |
| WorléePol® 6631 | Worlée-Chemie G.m.b.H. | WorléePol® 6631 is a branched hydroxyl group containing polyester, which is suitable for the manufacture of light and weather resistant 2 component paints. Reaction partners for W´Pol 6631 are especially aliphatic isocyanates, type Tolonate HDB-75. This c...voir plus WorléePol® 6631 is a branched hydroxyl group containing polyester, which is suitable for the manufacture of light and weather resistant 2 component paints. Reaction partners for W´Pol 6631 are especially aliphatic isocyanates, type Tolonate HDB-75. This combination shows excellent light resistance, gloss retention and weather as well as chemical and abrasion resistance. voir moins | |
| WorléePol® 6741 | Worlée-Chemie G.m.b.H. | WorléePol® 6741 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems. This grade has a non volatile content of 80% ± 1. Normally this polyester resin is used as a sole binder o...voir plus WorléePol® 6741 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems. This grade has a non volatile content of 80% ± 1. Normally this polyester resin is used as a sole binder or modifying component for isocyanate crosslinking solvent based high solid coatings. voir moins | |
| WorléePol® 6756 | Worlée-Chemie G.m.b.H. | WorléePol® 6756 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems for industrial and automotive repair paints with good mechanical properties and excellent chemical and weat...voir plus WorléePol® 6756 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems for industrial and automotive repair paints with good mechanical properties and excellent chemical and weather resistance. voir moins | |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...voir plus WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. voir moins | |
| WorléePol® V 450 | Worlée-Chemie G.m.b.H. | WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plastic...voir plus WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plasticizer. Due to the high reactivity it is possible to cure application quantities of approx. 25 g/m² wet film during 20 - 30 s at approx. 140 °C or 40 - 60 s at approx. 130 °C and excellent resistance properties are achieved. voir moins | |
| WorléeProtect 1507 | Worlée-Chemie G.m.b.H. | WorléeProtect 1507 is a functional coating material for technical applications. The film of W´Protect 1507 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and ma...voir plus WorléeProtect 1507 is a functional coating material for technical applications. The film of W´Protect 1507 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and max. 10 μm. Application occurs by common coating processes as e. g. spraying, dipping, floating or wiping. The inorganic-organic hybrid coating exhibits good adhesion on different substrates and can be air- and forced dried. The high gloss transparent films show high chemical resistance and are yellowing and chalk resistant. voir moins | |
| WorléeProtect 1519 (VP-E 1575/19) | Worlée-Chemie G.m.b.H. | WorléeProtect 1519 is a functional coating material for technical applications. The film of W´Protect 1519 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and ma...voir plus WorléeProtect 1519 is a functional coating material for technical applications. The film of W´Protect 1519 exhibits high scratch resistance, low tendency for soiling and easy-to-clean / anti graffiti-effect. Dry film thickness normally is between 1 and max. 10 μm. Application occurs by common coating processes as e. g. spraying, dipping, floating or wiping. The inorganic-organic hybrid coating exhibits good adhesion on different substrates and can be air- and forced dried. The high gloss transparent films show high chemical resistance and are yellowing and chalk resistant. voir moins | |
| WorléeSin GM 201 | Worlée-Chemie G.m.b.H. | WorléeSin GM 201 is a pale maleic resin with good light fastness. It is used as a universal resin in oil and alkyd synthetic paints, NC-lacquers and inks. W´Sin GM 201 is compatible with non drying and drying short, medium and long oil alkyds. It is also ...voir plus WorléeSin GM 201 is a pale maleic resin with good light fastness. It is used as a universal resin in oil and alkyd synthetic paints, NC-lacquers and inks. W´Sin GM 201 is compatible with non drying and drying short, medium and long oil alkyds. It is also compatible with nitrocellulose and amino resins. W´Sin GM 201 is soluble in aliphatic hydrocarbons, esters, ketones, higher alcohols and glycol ether esters. W´Sin GM 201 improves through-drying, gloss, hardness and film build of alkyd enamels and it adds gloss and structure to hammer finishes. voir moins | |
| WorléeSin GM 203 | Worlée-Chemie G.m.b.H. | WorléeSin GM 203 is a very pale and hard maleic resin with fast drying and through hardening characteristics for use in nitrocellulose, oil, and alkyd paints. W´Sin GM 203 is compatible with non drying and drying short, medium and long oil alkyds. It is a...voir plus WorléeSin GM 203 is a very pale and hard maleic resin with fast drying and through hardening characteristics for use in nitrocellulose, oil, and alkyd paints. W´Sin GM 203 is compatible with non drying and drying short, medium and long oil alkyds. It is also compatible with nitrocellulose and amino resins. Although the paint films are clear when W´Sin GM 203 is combined with drying oils, cooking is recommended to improve weather resistance. voir moins | |
| WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds an...voir plus WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds and urea formaldehyde resins. Even small quantities of W´Sin MK 223 in these lacquers improve hardness, scratch resistance and film build. voir moins | |
| WorléeSin MS 235 | Worlée-Chemie G.m.b.H. | WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cel...voir plus WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cellulose and with softeners, inks and varnishes based on W´Sin MS 235 exhibit a high gloss level and excellent transparency. Good pigment grinding is also observed. voir moins | |
| WorléeSin MS 265 | Worlée-Chemie G.m.b.H. | WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in fle...voir plus WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in flexo and gravure inks and overprint lacquers. voir moins | |
| WorléeSin PM 200 | Worlée-Chemie G.m.b.H. | WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added t...voir plus WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added to air drying decorative, house, DIY paints and to industrial coatings for improving hardness, gloss and solids content. Due to its low viscosity, good pigment wetting and very good compatibility, W´Sin PM 200 is also used for production of high concentrated solvent-based pigment pastes. voir moins | |
| WorléeSin PM 202 | Worlée-Chemie G.m.b.H. | WorléeSin PM 202 is a pentaerythritol maleic resin with fast solvent release and good color retention for the manufacture of oil and alkyd paints. W´Sin PM 202 is compatible with short, medium and long oil alkyds. This product is added to air drying indus...voir plus WorléeSin PM 202 is a pentaerythritol maleic resin with fast solvent release and good color retention for the manufacture of oil and alkyd paints. W´Sin PM 202 is compatible with short, medium and long oil alkyds. This product is added to air drying industrial paints to improve hardness, gloss and gloss retention. voir moins | |
| WorléeSol 07 A | Worlée-Chemie G.m.b.H. | WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neu...voir plus WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75%. Primers based on W´Sol 07 A show a very fast drying, excellent adhesion, long term elasticity and good corrosion resistance. voir moins | |
| WorléeSol 30 100% | Worlée-Chemie G.m.b.H. | WorléeSol 30 100% is a chemically modified, very low viscous linseed oil polymer. This grade has a non volatile content of 100%. Because of its high and easy pigmentation, freeze/thaw stability and high gloss, there are many interesting application fields...voir plus WorléeSol 30 100% is a chemically modified, very low viscous linseed oil polymer. This grade has a non volatile content of 100%. Because of its high and easy pigmentation, freeze/thaw stability and high gloss, there are many interesting application fields including: printing inks; additive for dispersion systems; pigment preparations or tinting colours; artists' paints; and temporary anticorrosive paints. voir moins | |
| WorléeSol 31 A | Worlée-Chemie G.m.b.H. | WorléeSol 31 A is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. It can also be used for clear wood impregnation, pigmented and transparent stains. It shows extremely good penet...voir plus WorléeSol 31 A is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. It can also be used for clear wood impregnation, pigmented and transparent stains. It shows extremely good penetration into the wood, excellent durability, easy application, no nail head rusting, good chalk binding and long term elasticity. voir moins | |
| WorléeSol 31 C | Worlée-Chemie G.m.b.H. | WorléeSol 31 C is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 31 C is a unique resin for the manufacture of water thinnable clear wood impregnation, pigmented and trans...voir plus WorléeSol 31 C is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 31 C is a unique resin for the manufacture of water thinnable clear wood impregnation, pigmented and transparent stains and wood preservatives. It shows extremely good penetration into the wood, excellent durability, easy application, no nailhead rusting, good chalk binding and long term elasticity. voir moins | |
| WorléeSol 37 | Worlée-Chemie G.m.b.H. | WorléeSol 37 is a modified linseed oil polymer. It is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 37 shows excellent penetration and outdoor durability on different woods as well as long term elasticity. The ...voir plus WorléeSol 37 is a modified linseed oil polymer. It is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 37 shows excellent penetration and outdoor durability on different woods as well as long term elasticity. The pH-value of wood preservatives based on W´Sol 37 should be between 8.2 - 8.5. voir moins | |
| WorléeSol 61 A | Worlée-Chemie G.m.b.H. | WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers base...voir plus WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 A show a very fast drying and throughdrying with excellent corrosion resistance. The best corrosion resistance will be obtained with the chromate free combination zinc phosphate ZP 20 + 0.5-2.0% Alcophor 827 (Heubach/Henkel). voir moins | |
| WorléeSol 61 E | Worlée-Chemie G.m.b.H. | WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to ...voir plus WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to it’s excellent wetting properties W´Sol 61 E is especially suitable for the manufacture of haze-free high gloss lacquers. voir moins | |
| WorléeSol 61 F | Worlée-Chemie G.m.b.H. | WorléeSol 61 F is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. For high glo...voir plus WorléeSol 61 F is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. For high gloss top coats and long term stability a combination of tri ethyl amine and ammonia is recommended. Alternatives like AMP-90 (Angus) etc. are also suitable. voir moins | |
| WorléeSol 61 P | Worlée-Chemie G.m.b.H. | WorléeSol 61 P is a special modified airdrying alkyd resin, which is supplied fully neutralized. It is used for the formulation of airdrying anticorrosive primers. Initial and through-drying can be sped up by using it together with a styrenebutadien-polym...voir plus WorléeSol 61 P is a special modified airdrying alkyd resin, which is supplied fully neutralized. It is used for the formulation of airdrying anticorrosive primers. Initial and through-drying can be sped up by using it together with a styrenebutadien-polymer e. g. W´Cop 100. Besides the reduction of VOC-levels, this combination shows structural viscosity, which allows high film thickness with low tendency to sagging. voir moins | |
| WorléeSol 64 E | Worlée-Chemie G.m.b.H. | WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers...voir plus WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 64 E show very fast drying and good anti corrosion properties. The application of W´Sol 64 E systems is similar to the conventional systems, e.g. spraying, dipping, flow coating etc. voir moins | |
| WorléeSol 65 A | Worlée-Chemie G.m.b.H. | WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinna...voir plus WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 65 A have a very good corrosion resistance. voir moins | |
| WorléeSol 65 E | Worlée-Chemie G.m.b.H. | WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, aird...voir plus WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, airdrying and forced dried primers and top coats. Primers based on W´Sol 65 E have a very good corrosion resistance if they are pigmented with e.g. zinc phosphate PZ 20 / Alcophor 827 (Henkel). voir moins | |
| WorléeSol 68 A | Worlée-Chemie G.m.b.H. | WorléeSol 68 A is a silicone modified, air drying alkyd resin, which is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75% ± 2. W´Sol 68 A is especially suitable as the only binder for the manufacture...voir plus WorléeSol 68 A is a silicone modified, air drying alkyd resin, which is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75% ± 2. W´Sol 68 A is especially suitable as the only binder for the manufacture of extremely high quality, water thinnable industrial paints. voir moins | |
| WorléeSol 84 C | Worlée-Chemie G.m.b.H. | WorléeSol 84 C is a short oil, water thinnable alkyd resin for stoving systems like primers, clear and top coats. This grade has a non volatile content of 44% ± 1. The delivery form, 1% cosolvents, allows formulations with a total solvent content < 1%. | |
| WorléeSol 85 A | Worlée-Chemie G.m.b.H. | WorléeSol 85 A is a modified water thinnable alkyd resin for stoving systems. This grade has a non volatile content of 43% ± 1. It is especially suitable for the manufacture of water thinnable stoving systems like primers, automotive fillers, clear and to...voir plus WorléeSol 85 A is a modified water thinnable alkyd resin for stoving systems. This grade has a non volatile content of 43% ± 1. It is especially suitable for the manufacture of water thinnable stoving systems like primers, automotive fillers, clear and top coats. voir moins | |
| WorléeSol E 150 W | Worlée-Chemie G.m.b.H. | WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistanc...voir plus WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistance can be formulated. Furthermore, a good outdoor resistance can occur. Other application fields for W´Sol E 150 W are air drying decorative, house and DIY-paints as well as wood protective glazings. voir moins | |
| WorléeSol E 330 W | Worlée-Chemie G.m.b.H. | WorléeSol E 330 W is a short oil PU alkyd emulsion for the formulation of cobaltfree anticorrosive primers. In high gloss topcoats an excellent outdoor durability can be achieved. Due to fast physical and oxidative drying properties siccatives are not alw...voir plus WorléeSol E 330 W is a short oil PU alkyd emulsion for the formulation of cobaltfree anticorrosive primers. In high gloss topcoats an excellent outdoor durability can be achieved. Due to fast physical and oxidative drying properties siccatives are not always necessary. voir moins | |
| WorléeSol E 530 W | Worlée-Chemie G.m.b.H. | WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically a...voir plus WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative drying, a cobalt drier is not necessary in many cases. Varnishes based on W´Sol E 530 W show good wood firing, good water and chemical resistance and high abrasion resistance. This grade has a non volatile content of 30% ± 1. voir moins | |
| WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with ...voir plus WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with excellent through drying and hardness even without the addition of a co-drier. W´Sol E 927 W also shows good compatibility with acrylic dispersions. voir moins | |
| WorléeSol NW 410 | Worlée-Chemie G.m.b.H. | WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The fo...voir plus WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The formulation of wood protection stains is also possible. The use of W´Sol NW 410 during the grinding process is not recommended. This grade has a non volatile content of 46% ± 2. voir moins | |
| WorléeSol NW 474 | Worlée-Chemie G.m.b.H. | WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is op...voir plus WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is open time and body improvement of decorative and house paints based on W´Sol E 150 W by addition of 3 - 10 % on total formulation. voir moins | |
| WorléeSol SE 420 W | Worlée-Chemie G.m.b.H. | WorléeSol SE 420 W is a medium oil, silicone modified, cosolvent-free alkyd emulsion, especially designed for the manufacture of airdrying water thinnable high gloss top coats. W´Sol SE 420 W mostly is used for the production of high- and silk-gloss paint...voir plus WorléeSol SE 420 W is a medium oil, silicone modified, cosolvent-free alkyd emulsion, especially designed for the manufacture of airdrying water thinnable high gloss top coats. W´Sol SE 420 W mostly is used for the production of high- and silk-gloss paints for the d.i.y and decorative range. The very good QUV-A fast weathering results and 3 years outdoor resistance test without any considerable gloss loss are further characteristics of W´Sol SE 420 W. voir moins | |
| WorléeThix 670 HS | Worlée-Chemie G.m.b.H. | WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and l...voir plus WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. Main application fields are high solid, solvent based, air drying primers, gloss paints, silk gloss paints and glazings for decorative paints, especially with regard to the stricter VOC limit values from 2010 on. W´Thix 670 hs can be used either as a sole binder or as an additional binder (e. g. in combination with W´Kyd SD 7003, 85% in dearomatized HC 160-200). voir moins | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings...voir plus WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings. After curing, the coating exhibits hardness, chemical and weather resistance. Application fields for W´Thix A 1420 are pigmented and colourless wood coating systems. In these coating formulations W´Thix A 1420 is used for adjusting the stability at vertical surfaces. voir moins | |
| WorléeThix A 2125 | Worlée-Chemie G.m.b.H. | WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal...voir plus WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal, wood and plastics. The aliphatic system shows excellent hardness, good chemical resistance and a good outdoor durability already at room temperature. W´Thix A 2125 is suitable for many industrial applications such as agricultural equipment, construction trucks, and plastic coatings. This product is also used to formulate decorative effect coatings voir moins | |
| WorléeThix A 2242 W | Worlée-Chemie G.m.b.H. | WorléeThix A 2242 W is a thixotropic emulsion of an styrene acrylate polymerized with solvents. This grade has a non volatile content of 58% ± 2. W´Thix A 2242 W is used alone or in combination with W´Cryl A 2242 W for the manufacture of outdoor resistan...voir plus WorléeThix A 2242 W is a thixotropic emulsion of an styrene acrylate polymerized with solvents. This grade has a non volatile content of 58% ± 2. W´Thix A 2242 W is used alone or in combination with W´Cryl A 2242 W for the manufacture of outdoor resistant top coats and effect coats. voir moins | |
| WorléeThix A 2313 | Worlée-Chemie G.m.b.H. | WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of...voir plus WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of air and forced drying industrial paints. Even at room temperature paint films show high hardness, chemical resistance and very good weather resistance. Application fields for W´Thix A 2313 are coatings of front elements and plastic coatings. W´Thix A 2313 can also be used for formulating decorative effect finishes. voir moins | |
| WorléeThix D 46 | Worlée-Chemie G.m.b.H. | WorléeThix D 46 is a thixotropic epoxy ester used in air drying and stoving finishes for adherence primers, anti-corrsion, and zinc dust coatings. This grade has a non volatile content of 50% ± 2. W´Thix D 46 is soluble in aromates, esters, ketones and g...voir plus WorléeThix D 46 is a thixotropic epoxy ester used in air drying and stoving finishes for adherence primers, anti-corrsion, and zinc dust coatings. This grade has a non volatile content of 50% ± 2. W´Thix D 46 is soluble in aromates, esters, ketones and glycol ethers. It is based on conjugated drying fatty acids. voir moins | |
| WorléeThix L 7904 | Worlée-Chemie G.m.b.H. | WorléeThix L 7904 is a low viscous, thixotropic, long oil alkyd resin for fillers and putties and for modifying oil paints. It exhibits excellent weather resistance and permanent elasticity. The oil length for this grade is 79%. W´Thix L 7904 is compatibl...voir plus WorléeThix L 7904 is a low viscous, thixotropic, long oil alkyd resin for fillers and putties and for modifying oil paints. It exhibits excellent weather resistance and permanent elasticity. The oil length for this grade is 79%. W´Thix L 7904 is compatible with most airdrying medium and long oil alkyd resins. voir moins | |
| WorléeThix L 8050 | Worlée-Chemie G.m.b.H. | WorléeThix L 8050 is a thixotropic long oil alkyd resin based on linseed oil which is mostly used for wood glazings. The oil length for this grade is approx. 80%. | |
| WorléeThix MH 439 | Worlée-Chemie G.m.b.H. | WorléeThix MH 439 is a short oil, thixotropic alkyd resin used as a binder for fast drying and not sagging industrial primers and top coats. This grade has a non volatile content of 60% ± 2. The gel structure is temperature and polar solvents stable. W´Th...voir plus WorléeThix MH 439 is a short oil, thixotropic alkyd resin used as a binder for fast drying and not sagging industrial primers and top coats. This grade has a non volatile content of 60% ± 2. The gel structure is temperature and polar solvents stable. W´Thix MH 439 is used for the production of thixotropic primers, top coats, hammer finish and other structured paints. By using W´Thix MH 439 very good stability on vertical surfaces is achieved. The use of anti settling or gelling agents is not necessary. voir moins | |
| WorléeThix S 2655 | Worlée-Chemie G.m.b.H. | WorléeThix S 2655 is a short oil, very fast drying thixotropic alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 2. W´Thix S 2655 is a general purpose thixotropic combinati...voir plus WorléeThix S 2655 is a short oil, very fast drying thixotropic alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 2. W´Thix S 2655 is a general purpose thixotropic combination resin with very good drying properties for primers and top coats. voir moins | |
| WorléeThix S 6357 | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosi...voir plus WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primers, decorative and building paints as well as thick layer wood glazings. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. voir moins | |
| WorléeThix S 6357 (40% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W...voir plus WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. voir moins | |
| WorléeThix S 6357 (40% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Th...voir plus WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. voir moins | |
| WorléeThix S 6358 | Worlée-Chemie G.m.b.H. | WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive prime...voir plus WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primers, decorative and building paints as well as wood glazings. W´Thix S 6358 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. voir moins | |
| WorléeThix S 6455 | Worlée-Chemie G.m.b.H. | WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also comp...voir plus WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. W´Thix S 6455 is especially suitable for the manufacture of thixotropic primers, fillers, gloss and silk gloss paints as well as for wood glazings. voir moins | |
| WorléeThix SD 6051 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with...voir plus WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. It is also used for wood glazings. voir moins | |
| WorléeThix SD 6051 (55% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins...voir plus WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. This grade has a non volatile content of 55% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix SD 6051 reduces sagging from vertical surfaces. voir moins | |
| WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...voir plus WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 decreases sagging from vertical surfaces. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. voir moins | |
| WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...voir plus WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. voir moins |
