| HEUCOPHOS® SRPP In Coil Coating (Formulation #02236) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SRPP In Coil Coating (Formulation #02236) is a formulation for a solvent based coil coating in combination with Heubach formulation No. 02236. | |
| HEUCOPHOS® SAPP / HEUCOPHOS® ZPA In Coil Coating (Formulation #02239) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SAPP / HEUCOPHOS® ZPA In Coil Coating (Formulation #02239) is a formulation for a solvent based coil coating in combination with Heubach. | |
| HEUCOPHOS® SAPP In Coil Coating (Formulation #02241) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SAPP In Coil Coating (Formulation #02241) is a formulation for a solvent based coil coating in combination with Heubach formulation No. 02241. | |
| Nubirox FR-10 | Ferro Pigments | Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapo...voir plus Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapour and liquid phase. voir moins | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...voir plus BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. voir moins | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...voir plus EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. voir moins | |
| HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #00173) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #00173) is a formulation for a solvent based styrene-acrylic in combination with Heubach formulation No. 00173. | |
| HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #02238) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #02238) is a formulation for a solvent based styrene-acrylic in combination with Heubach formulation No. 02238. | |
| Corrosperse 176A-100 70% | WPC Technologies, Inc. | Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne prim...voir plus Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. voir moins | |
| Corrosperse 176C | WPC Technologies, Inc. | Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne c...voir plus Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne coating applications. voir moins | |
| Corrosperse 176E | WPC Technologies, Inc. | Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-bor...voir plus Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-borne primer applications. voir moins | |
| Corrosperse 176M | WPC Technologies, Inc. | Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne pr...voir plus Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. voir moins | |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...voir plus DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. voir moins | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| HEUCOSIL CTF | Heubach/Heucotech, Ltd. | With the development of HEUCOSIL CTF, Heubach added a highly effective zinc-free Anticorrosive to its present product line. HEUCOSIL CTF is a pigment based on a calcium modified silica gel and meets especially the specific performance requirements for Coi...voir plus With the development of HEUCOSIL CTF, Heubach added a highly effective zinc-free Anticorrosive to its present product line. HEUCOSIL CTF is a pigment based on a calcium modified silica gel and meets especially the specific performance requirements for Coil Coating and Thin-Film applications. voir moins | Request Sample |
| BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| HEUCOPHOS® SAPP / HEUCORIN® RZ in Aircraft Primer (Formulation #410-10) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SAPP / HEUCORIN® RZ in Aircraft Primer (Formulation #410-10) is a formulation for a solvent based aircraft primer in combination with Heubach. | |
| HEUCOPHOS® SRPP / HEUCORIN® RZ in Aircraft Primer (Formulation #410-12) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SRPP / HEUCORIN® RZ in Aircraft Primer (Formulation #410-12) is a formulation for a solvent based aircraft primer in combination with Heubach formulation No. 410-12. | |
| HEUCOPHOS® VP92103 / HEUCOPHOS® SRPP In Aircraft Primer (Formulation #93116) | Heubach/Heucotech, Ltd. | HEUCOPHOS® VP92103 / HEUCOPHOS® SRPP In Aircraft Primer (Formulation #93116) is a formulation for a solvent based aircraft primer in combination with Heubach formulation No. 93116. | |
| HEUCOPHOS® SRPP In Aircraft Primer (Formulation #02224) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SRPP In Aircraft Primer (Formulation #02224) is a formulation for a solvent based aircraft primer in combination with Heubach formulation No. 02224. | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or ...voir plus SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. voir moins | |
| Waterborne Anticorrosion Alkyd PU Emulsion Paint (Formulation #SPF_CTG_014_2203) | Arkema Rheology & Specialty Additives | This waterborne anticorrosion alkyd PU emulsion paint features Coadis™ 790 and Coapure™ 830 W. | |
| BYK®-1794 | BYK | BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems. It is suitable for pigmented and non-pigmented systems, has no effect on surface properties or transparency, and is effective during production and further processing. The additive consists of 100% solids and is solvent-free. BYK-1794 is used in thick layer systems, such as coatings for flooring. BYK-1794 offers excellent compatibility with solvent-free coatings for ballast tanks, tank interiors, etc. It is also highly effective in 100% polyurethane and polyaspartic acid ester systems for pipeline and concrete coatings as well as other solvent-free coating systems for a high degree of corrosion...voir plus BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems. It is suitable for pigmented and non-pigmented systems, has no effect on surface properties or transparency, and is effective during production and further processing. The additive consists of 100% solids and is solvent-free. BYK-1794 is used in thick layer systems, such as coatings for flooring. BYK-1794 offers excellent compatibility with solvent-free coatings for ballast tanks, tank interiors, etc. It is also highly effective in 100% polyurethane and polyaspartic acid ester systems for pipeline and concrete coatings as well as other solvent-free coating systems for a high degree of corrosion protection. In typical solvent-borne coil coating systems (e.g. polyester melamine or PUR systems), BYK-1794 is very compatible and produces good, spontaneous defoaming effects. Excellent results can be achieved in UV systems for wood and furniture coatings. voir moins | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...voir plus Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. voir moins | Request Sample |
| VEEGUM® R | Vanderbilt Minerals, LLC | VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive ...voir plus VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive viscosity. It prevents syneresis and settling, provides dripless application, controlled sag and improved leveling. voir moins | |
| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...voir plus 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. voir moins | |
| BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...voir plus BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. voir moins | |
| HEUCOPHOS® ZMP In Direct To Metal One Coat (Formulation #WP 98-4) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZMP In Direct To Metal One Coat (Formulation #WP 98-4) is a formulation for a water based direct to metal one coat in combination with Cognis formulation No. WP 98-4. | |
| HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #99169) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #99169) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 99169. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #01209) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #01209) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 01209. | |
| HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02225) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02225) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02225. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02226) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02226) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02226. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02227) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02227) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02227. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02228) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02228) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02228. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02229) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #02229) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02229. | |
| HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02230) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Direct To Metal One Coat (Formulation #02230) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 02230. | |
| HEUCOPHOS® ZAM-Plus / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #341-09) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZAM-Plus / HEUCORIN® RZ In Direct To Metal One Coat (Formulation #341-09) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 341-09. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Direct Metal One Coat (Formulation #341-11) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Direct Metal One Coat (Formulation #341-11) is a formulation for a water based direct to metal one coat in combination with Heubach formulation No. 341-11. | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...voir plus CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. voir moins | |
| Nubirox 301 | Ferro Pigments | Nubirox 301 is a zinc and labeling-free, white Anticorrosive pigment. It is a Calcium Strontium Phosphosilicate that allows replacing standard Zinc Phosphate exhibiting similar or better performance in solventborne and solventborne systems. | |
| Durazane® 1500 rapid cure | Merck | Durazane® 1500 rapid cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| Durazane® 1500 slow cure | Merck | Durazane® 1500 slow cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...voir plus ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. voir moins | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or prim...voir plus Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. voir moins | |
| Water Thinnable Alkyd DTM Anticorrosion Paint (Formulation #SPF_CTG_015_2203) | Arkema Rheology & Specialty Additives | This anticorrosion paint features Coadis™ 790 & Coapur™ XS 83. | |
| Epokukdo YDF-161H | Kukdo Chemical Co., Ltd. | Epokukdo YDF-161H is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161H is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161H is generally used i...voir plus Epokukdo YDF-161H is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161H is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161H is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. voir moins | |
| Epokukdo YDF-161 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-161 is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161 is generally used in a...voir plus Epokukdo YDF-161 is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161 is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. voir moins | |
| ZNO Grade 800XL | Zinc Oxide LLC | ZNO Grade 800XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay, and very low impurities. This grade is used where very low impurities are required and large particle zinc oxide provides benefits in the appli...voir plus ZNO Grade 800XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay, and very low impurities. This grade is used where very low impurities are required and large particle zinc oxide provides benefits in the application, such as in paint and coatings, ceramics, soft ferrites and varistors. voir moins | |
| ZNO Grade 800L | Zinc Oxide LLC | ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less ...voir plus ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics. voir moins | |
| ZNO Grade 800 | Zinc Oxide LLC | ZNO Grade 800 is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with medium surface area, high assay and very low impurities. This grade is used where lower impurities are required and is used in the tire and rubb...voir plus ZNO Grade 800 is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with medium surface area, high assay and very low impurities. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. voir moins | |
| ZNO Grade 800H | Zinc Oxide LLC | ZNO Grade 800H is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where lower impurities are required and increased zinc oxide reac...voir plus ZNO Grade 800H is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where lower impurities are required and increased zinc oxide reactivity provides benefits in certain zinc chemicals applications. voir moins | |
| ZNO Grade 800HSA | Zinc Oxide LLC | ZNO Grade 800HSA is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where very low impurities are required and increased zinc oxide...voir plus ZNO Grade 800HSA is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where very low impurities are required and increased zinc oxide reactivity provides application benefits. voir moins | |
| ZNO Grade 500XL | Zinc Oxide LLC | ZNO Grade 500XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay and low impurities. This grade is used where low impurities are required and large particle zinc oxide provides benefits in the application, suc...voir plus ZNO Grade 500XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay and low impurities. This grade is used where low impurities are required and large particle zinc oxide provides benefits in the application, such as in paint and coatings, ceramics, soft ferrites and varistors. voir moins | |
| ZNO Grade 500L | Zinc Oxide LLC | ZNO Grade 500L is manufactured by French (Indirect) Process with lower surface area, high assay and low impurities. ZNO Grade 500L meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Di...voir plus ZNO Grade 500L is manufactured by French (Indirect) Process with lower surface area, high assay and low impurities. ZNO Grade 500L meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics and electronics . voir moins | |
| ZNO Grade 500 | Zinc Oxide LLC | ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Dir...voir plus ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. voir moins | |
| ZNO Grade 500H | Zinc Oxide LLC | ZNO Grade 500H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and low impurities. ZNO Grade 500H meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicl...voir plus ZNO Grade 500H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and low impurities. ZNO Grade 500H meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and increased zinc oxide reactivity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. voir moins | |
| ZNO Grade 500HSA | Zinc Oxide LLC | ZNO Grade 500HSA is manufactured by French (Indirect) Process with very high surface area, high assay and low impurities. ZNO Grade 500HSA meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles...voir plus ZNO Grade 500HSA is manufactured by French (Indirect) Process with very high surface area, high assay and low impurities. ZNO Grade 500HSA meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and increased zinc oxide re-activity provides application benefits. voir moins | |
| ZNO Grade 400L | Zinc Oxide LLC | ZNO Grade 400L is manufactured by French (Indirect) Process with lower surface area, high assay and moderate impurities. This grade is used where slightly less reactivity provides benefits in the application, such as in paint and coatings to reduce potent...voir plus ZNO Grade 400L is manufactured by French (Indirect) Process with lower surface area, high assay and moderate impurities. This grade is used where slightly less reactivity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. voir moins | |
| ZNO Grade 400 | Zinc Oxide LLC | ZNO Grade 400 is manufactured by French (Indirect) Process with medium surface area, high assay and moderate impurities. This grade is widely used in the tire and rubber, paint and coatings, and all applications requiring an FDA approved substance. | |
| ZNO Grade 400H | Zinc Oxide LLC | ZNO Grade 400H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemica...voir plus ZNO Grade 400H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. voir moins | |
| ZNO Grade 400HSA | Zinc Oxide LLC | ZNO Grade 400HSA is manufactured by French (Indirect) Process with very high surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals m...voir plus ZNO Grade 400HSA is manufactured by French (Indirect) Process with very high surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. voir moins | |
| ZNO Grade USP10 | Zinc Oxide LLC | ZNO Grade USP10 grade is manufactured by ZNO to the most stringent quality standards in the world for manufacturing pharmaceutical drug product. ZNO Grade 400 meets GRAS (Generally Recognized As Safe) USFDA Pharma standards for use as an ingredient for fo...voir plus ZNO Grade USP10 grade is manufactured by ZNO to the most stringent quality standards in the world for manufacturing pharmaceutical drug product. ZNO Grade 400 meets GRAS (Generally Recognized As Safe) USFDA Pharma standards for use as an ingredient for food contact in rubber, plastics, food can lining coatings, etc.Use ZNO Grade 400 wherever use of an FDA approved grade is required. voir moins | |
| Polyglykol AM 1100 | Clariant International Ltd. | Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its allyl group Polyglycol AM 1100 has the necessary requirement for many different chemical reactions. Additional reactions with silyl compounds can be carried out very easily, and under certain conditions other radical reactions or radical polymerizations are also possible. In this way, agrochemicals, plastics in the construction industry and other polymers can be given the properties of polyethylene glycol, particularly hydrophilic properties right through to water solubility. Applications in this area include paint additives, PU foam stabilization, manufacture of water-soluble or water-dispersible paints, silicone chemistry and hydrophilic modification of polymers in general. Other applications include their use in combination with nitrites for corrosion...voir plus Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its allyl group Polyglycol AM 1100 has the necessary requirement for many different chemical reactions. Additional reactions with silyl compounds can be carried out very easily, and under certain conditions other radical reactions or radical polymerizations are also possible. In this way, agrochemicals, plastics in the construction industry and other polymers can be given the properties of polyethylene glycol, particularly hydrophilic properties right through to water solubility. Applications in this area include paint additives, PU foam stabilization, manufacture of water-soluble or water-dispersible paints, silicone chemistry and hydrophilic modification of polymers in general. Other applications include their use in combination with nitrites for corrosion protection (as an additive to hydraulic cement and cement for steel-reinforced concrete), and in paper bleaching (as a delignifying agent). This product is also available as Polyglykol AM 1100, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.5% . voir moins | |
| WorléeSol 61 P | Worlée-Chemie G.m.b.H. | WorléeSol 61 P is a special modified airdrying alkyd resin, which is supplied fully neutralized. It is used for the formulation of airdrying anticorrosive primers. Initial and through-drying can be sped up by using it together with a styrenebutadien-polym...voir plus WorléeSol 61 P is a special modified airdrying alkyd resin, which is supplied fully neutralized. It is used for the formulation of airdrying anticorrosive primers. Initial and through-drying can be sped up by using it together with a styrenebutadien-polymer e. g. W´Cop 100. Besides the reduction of VOC-levels, this combination shows structural viscosity, which allows high film thickness with low tendency to sagging. voir moins | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...voir plus Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. voir moins | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...voir plus Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. voir moins | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...voir plus Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. voir moins | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion...voir plus CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. voir moins | |
| VANSIL® HR-1500 | Vanderbilt Minerals, LLC | VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance...voir plus VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. voir moins | |
| VANSIL® WG | Vanderbilt Minerals, LLC | VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coa...voir plus VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. voir moins | |
| VANSIL® HR-2000 | Vanderbilt Minerals, LLC | VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance ...voir plus VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. voir moins | |
| VANSIL® CK-20 | Vanderbilt Minerals, LLC | VANSIL® CK-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Epokukdo YD-134 | Kukdo Chemical Co., Ltd. | Epokukdo YD-134 is a semisolid epoxy resin for the general adhesives, coatings and moldings industries. YD-134 has good adhesion, excellent mechanical properties and chemical resistance. This product is mainly recommended for anti-corrosive industrial coa...voir plus Epokukdo YD-134 is a semisolid epoxy resin for the general adhesives, coatings and moldings industries. YD-134 has good adhesion, excellent mechanical properties and chemical resistance. This product is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, coal tar epoxy and various adhesives. It has high viscosity and has higher EEW, so that it needs less quantity of curatives and accelerators than standard liquid resins such as YD-128. voir moins | |
| Epokukdo YD-134L | Kukdo Chemical Co., Ltd. | Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommend...voir plus Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, and various adhesives. YD-134L has higher EEW, so that it needs less quantity of curatives and accelerators than standard liquid resin such as YD -128. voir moins | |
| NYAD® 1250 | NYCO Minerals, Inc. | NYAD® 1250 is a fine particle size wollastonite for industrial, powder, automotive, architectural and wood stains. It is a natural matting agent for powder and architectural coatings, acts as a pH buffer, and provides 6+ fineness grind. | |
| NYAD® 400 | NYCO Minerals, Inc. | NYAD® 400 is a 400 mesh wollastonite for architectural and powder coatings. It works as a pH buffer, improves tintability, non-toxic, and provides better wear. It is an excellent replacement for nepheline syenite and talc. | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...voir plus Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. voir moins | |
| White Anti-Corrosive Primer for Airless Spray (Formulation #07-1042A) | Ashland | Based on Neocryl* XK-87 and Nubirox* 106, primer - airless and air sprayable. | |
| Razeen® SR 5199 | Jubail Chemical Industries Co. | Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enam...voir plus Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enamels as well as anti-corrosive paints. voir moins | |
| WorléeThix S 6357 (40% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Th...voir plus WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. voir moins | |
| Epokukdo YDF-162 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-162 is a non-diluted Bisphenol-A/F type liquid Epoxy Resin. YDF-162 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-162 is generally used in a...voir plus Epokukdo YDF-162 is a non-diluted Bisphenol-A/F type liquid Epoxy Resin. YDF-162 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-162 is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. voir moins | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...voir plus Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. voir moins | |
| Epokukdo KD-211E | Kukdo Chemical Co., Ltd. | Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...voir plus Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. voir moins | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion...voir plus CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. voir moins | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion...voir plus CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. voir moins | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...voir plus CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. voir moins | |
| Epotec® YD 901EK-80 | Aditya Birla | Epotec® YD 901EK-80 is an unmodified, standard, medium molecular weight and low softening point epoxy resin in MEK. This product is ideal for use in marine coatings, industrial anti-corrosive & maintenance coatings, and adhesives. | |
| Novares® LA 700 | Rain Carbon Germany GmbH | Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasti...voir plus Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. voir moins | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...voir plus AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). voir moins | |
| WorléeKyd L 6800 | Worlée-Chemie G.m.b.H. | WorléeKyd L 6800 is an alkyd resin used in anticorrosive, do-it-yourself, and house paints with high film build and good flow properties. This grade has a non-volatile content of 81% ± 1. W´Kyd L 6800 can be easily combined with urethane modified alkyd re...voir plus WorléeKyd L 6800 is an alkyd resin used in anticorrosive, do-it-yourself, and house paints with high film build and good flow properties. This grade has a non-volatile content of 81% ± 1. W´Kyd L 6800 can be easily combined with urethane modified alkyd resins. voir moins | |
| Novares® TT 30 | Rain Carbon Germany GmbH | Novares® TT 30 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter...voir plus Novares® TT 30 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. voir moins | |
| Novares® TT 90 | Rain Carbon Germany GmbH | Novares® TT 90 is a solid hydrocarbon resin (SP 90°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardnes...voir plus Novares® TT 90 is a solid hydrocarbon resin (SP 90°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. voir moins | |
| Novares® TT 100 | Rain Carbon Germany GmbH | Novares® TT 100 is a solid hydrocarbon resin(SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardne...voir plus Novares® TT 100 is a solid hydrocarbon resin(SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. voir moins | |
| Epotec® YD 801 X 75 | Aditya Birla | Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corro...voir plus Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corrosive coatings, adhesives, and laminates. voir moins | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...voir plus Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. voir moins |
