| DISK MILL PULVERISETTE 13 PREMIUM LINE VIDEO | FRITSCH GmbH - Milling and Sizing | Disk Mill PULVERISETTE 13 premium line is a grinder that can turn hard-brittle to medium-hard solids into small, fine particles. Applications can spread from chemistry industry to metallic industry for grinding purposes. | |
| JAW CRUSHER PULVERISETTE 1 PREMIUM LINE VIDEO | FRITSCH GmbH - Milling and Sizing | Jaw Crusher PULVERISETTE 1 premium line is a "crusher" that has up to 3 kW drive power that ensures exceptionally high throughput during pre-crushing of hard materials. Applications to this product include crushing of small or brittle materials. | |
| Admix MayoMill™ | Admix, Inc. | The Admix MayoMill™ has revolutionized the way mayonnaise and whipped salad dressings are made. It is truly CIP-capable using standard practices already employed in most plants, which eliminates the costs associated with daily disassembly. It eliminates t...voir plus The Admix MayoMill™ has revolutionized the way mayonnaise and whipped salad dressings are made. It is truly CIP-capable using standard practices already employed in most plants, which eliminates the costs associated with daily disassembly. It eliminates the need for multiple units in parallel and offers single unit throughput up to 110 GPM. The MayoMill's shear rate can be adjusted by changing speeds instead of manual gap changes, which allows for much more consistent product reaching your filler. voir moins |  |
| Automated and Multi-Sample High Throughput Milling | Automaxion | Automated and Multi-Sample High Throughput Milling is a patented system that allows many samples to be milled at a time. Thirty-two samples at once is possible, depending on the size of the milling vessel or model of mill selected. Particle reduction down...voir plus Automated and Multi-Sample High Throughput Milling is a patented system that allows many samples to be milled at a time. Thirty-two samples at once is possible, depending on the size of the milling vessel or model of mill selected. Particle reduction down to 1um has been obtained in less than an hour, and 0.1um has been obtained in about two hours with no significant sample heating. voir moins |  |
| Boston Shearmill High Intensity Wet Milling, Homogenizing & Particle Reduction | Admix, Inc. | Boston Shearmill provides high to extreme shear rates and tip speeds for maximum droplet and particle size reduction. A flagship product, it is used in countless applications across the food, beverage, personal care and cosmetics industries. Models are av...voir plus Boston Shearmill provides high to extreme shear rates and tip speeds for maximum droplet and particle size reduction. A flagship product, it is used in countless applications across the food, beverage, personal care and cosmetics industries. Models are available from 15 to 75 HP, with throughputs from 5 to 165 GPM depending on feed rate and viscosity. voir moins |  |
| Boston Shearpump Inline, High Volume Mixing | Admix, Inc. | The Boston Shearpump is ideal for mixing solids or powders into viscous liquids that typical high shear mixers cannot handle. It offers substantially higher throughput and higher shear rates compared to conventional shearpumps, and its 3-A #36-01 complian...voir plus The Boston Shearpump is ideal for mixing solids or powders into viscous liquids that typical high shear mixers cannot handle. It offers substantially higher throughput and higher shear rates compared to conventional shearpumps, and its 3-A #36-01 compliant design is easy-to-clean. Two models available for flow ranges from 10-150 GPM. voir moins |  |
| CONDUX Classifier Mill CSM | NETZSCH Grinding & Dispersing | The CSM classifier mill combines a mechanical impact mill with an integrated dynamic air classifier. The grinding is performed between a peripheral grinding track and the rotating beater gear. Due to the integrated classifier wheel, grain sizes free of co...voir plus The CSM classifier mill combines a mechanical impact mill with an integrated dynamic air classifier. The grinding is performed between a peripheral grinding track and the rotating beater gear. Due to the integrated classifier wheel, grain sizes free of coarse particles can be achieved without the disadvantages of an external grinding and classifying circulation system. Internal classification of the coarse material results in a more stable and energy efficient process than a mill with an external classification circuit. voir moins |  |
| CONDUX Classifier Mill CSM Ceramic | NETZSCH Grinding & Dispersing | The CSM classifier mill combines a mechanical impact mill with an integrated dynamic air classifier. The grinding is performed between a peripheral grinding track and the rotating beater gear. Due to the integrated classifier wheel, grain sizes free of co...voir plus The CSM classifier mill combines a mechanical impact mill with an integrated dynamic air classifier. The grinding is performed between a peripheral grinding track and the rotating beater gear. Due to the integrated classifier wheel, grain sizes free of coarse particles can be achieved without the disadvantages of an external grinding and classifying circulation system. Internal classification of the coarse material results in a more stable and energy efficient process than a mill with an external classification circuit. voir moins |  |
| Condux Fluidized Bed Jet Mill CGS | NETZSCH Grinding & Dispersing | Condux Fluidized Bed Jet Mill CGS is capable of fine grinding all kinds of dry products with virtually no contamination. A wide range of machine sizes including lab-scale machines for research or small production amounts as well as larger production scale...voir plus Condux Fluidized Bed Jet Mill CGS is capable of fine grinding all kinds of dry products with virtually no contamination. A wide range of machine sizes including lab-scale machines for research or small production amounts as well as larger production scale machines allow the milling of product quantities form a few kg/h to several t/h. voir moins |  |
| CONDUX High Density Bed Jet Mill ConJet® | NETZSCH Grinding & Dispersing | The ConJet® High Density Bed Jet Mill combines a spiral jet mill with an integrated classifier wheel. This combination allows the ConJet® to produce materials with the highest fineness independent of the product load, and with higher throughput capacities...voir plus The ConJet® High Density Bed Jet Mill combines a spiral jet mill with an integrated classifier wheel. This combination allows the ConJet® to produce materials with the highest fineness independent of the product load, and with higher throughput capacities. In the past, the fineness was controlled by adjusting the feed rate. Now, the integrated dynamic air classifier in the housing can be infinitely adjusted to guaranty exact and consistently reproducible product quality in this spiral jet mill. voir moins |  |
| CONDUX® Impact Mill | NETZSCH Grinding & Dispersing | The Impact Mill Condux® is a high speed fine impact mill for the dry grinding of various products up to a Mohs hardness of 3 - 3,5. The diversity of grinding tools allow the mill to be used universally depending on the application and area of operation. T...voir plus The Impact Mill Condux® is a high speed fine impact mill for the dry grinding of various products up to a Mohs hardness of 3 - 3,5. The diversity of grinding tools allow the mill to be used universally depending on the application and area of operation. This of course also applies later on, when circumstances such as product characteristics or requirements have changed, the grinding tools can be changed as well. voir moins |  |
| CONDUX Universal Mill CUM Compact | NETZSCH Grinding & Dispersing | The grinding of products, whose dusts are potentially explosive, places particularly high demands on the technology used and the design of a grinding plant with regard to safety. The most frequently used variant is a complete grinding system which is pres...voir plus The grinding of products, whose dusts are potentially explosive, places particularly high demands on the technology used and the design of a grinding plant with regard to safety. The most frequently used variant is a complete grinding system which is pressure shock resistant up to 10 bar (g). However, this usually means considerable costs for peripheral equipment. With the new ATEX-compliant plant concept CONDUX® COMPACT, the installation of a more efficient grinding plant for many products is considerably easier. voir moins |  |
| CUTTING MILL COMBINATION PULVERISETTE 25/PULVERISETTE 19 | FRITSCH GmbH - Milling and Sizing | Suitable for comminution of extremely heterogeneous samples. Can comminute samples of up to 2 litres in one step from 30 mm down to a final fineness of < 500 µm. A representative portion for analysis is available within 5 minutes. The combination is used,...voir plus Suitable for comminution of extremely heterogeneous samples. Can comminute samples of up to 2 litres in one step from 30 mm down to a final fineness of < 500 µm. A representative portion for analysis is available within 5 minutes. The combination is used, among other applications, for the preparation of heterogeneous substances for analysis according to the Technical Instruction on Municipal Waste Management (TOC) or for determination of calorific value and chlorine content. voir moins |  |
| CUTTING MILL PULVERISETTE 15 | FRITSCH GmbH - Milling and Sizing | For comminution of dry sample material with soft to medium-hard consistency, for fibrous materials or cellulosic materials as well as for sample preparation according to RoHS. Max. feed size: 70 x 70 mm. |  |
| EXTRUDER POLYFLOC™ BCFA FLAKING ROLLER MILL | Bühler Pasta & Extruded Products | The flaking roller mill POLYfloc™ is especially well suited for the flaking or rolling of grain or grain pellets into breakfast cereals or grain flakes. The POLYfloc™ is also used successfully for specialized, customer-specific applications. |  |
| FrymaKoruma Corundum Stone Mill MK 160 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...voir plus FrymaKoruma Corundum Stone Mill MK 160 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 30 - 500kg/h and a product fineness of approx. 40 - 200μm. voir moins |  |
| FrymaKoruma Corundum Stone Mill MK 180 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...voir plus FrymaKoruma Corundum Stone Mill MK 180 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. voir moins |  |
| FrymaKoruma Corundum Stone Mill MK 250 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...voir plus FrymaKoruma Corundum Stone Mill MK 250 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 90 - 2'000kg/h and a product fineness of approx. 40 - 200μm. voir moins |  |
| FrymaKoruma Corundum Stone Mill MK 300 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...voir plus FrymaKoruma Corundum Stone Mill MK 300 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 150 - 3'000kg/h and a product fineness of approx. 40 - 200μm. voir moins |  |
| FrymaKoruma Corundum Stone Mill MK 320 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwe...voir plus FrymaKoruma Corundum Stone Mill MK 320 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 200 - 5'000kg/h and a product fineness of approx. 40 - 200μm. voir moins |  |
| FrymaKoruma Corundum Stone Mill MK 95 | Romaco FrymaKoruma | FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap betwee...voir plus FrymaKoruma Corundum Stone Mill MK 95 is used for the dispersing and wet grinding of liquid and pasty products. The heart of this mill is the corundum stones. At high speed the rotor element rotates against the stationery stator element. In the gap between the two corundum stones, the product is subjected to high shearing, cutting and crushing forces. This mill has a capacity range of approx. 10 - 160kg/h and a product fineness of approx. 40 - 200μm. voir moins |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 150 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...voir plus The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. voir moins |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 180 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...voir plus The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. voir moins |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 250 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...voir plus The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. voir moins |  |
| FRYMAKORUMA PERFORATED DISC MILL ML 330 | Romaco FrymaKoruma | The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes ...voir plus The FrymaKoruma perforated disc mill is used for pre-grinding, pulping and mashing of lumpy products, e. g. fruit or vegetables. Above the perforated disc a knife bar rotates at high speed. It crushes and presses the axially fed product through the holes of the perforated disc. voir moins |  |
| FrymaKoruma Stirrer Bead CoBall®-Mill | Romaco FrymaKoruma | The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter ...voir plus The FrymaKoruma Stirrer Bead CoBall®-Mill is an annular gap bead mill for fine milling of suspensions and high-viscosity products. The quality of the finished product is influenced by the peripheral rotor speed, the milling gap, the material and diameter of grinding media, bead load and flow velocity. Each of these parameters can be varied at will to create the optimum conditions for each product. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 100 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 110 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 130 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 150 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 190 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 250 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 50 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| FRYMAKORUMA TOOTHED COLLOID MILL MZ 80 | Romaco FrymaKoruma | The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between...voir plus The FrymaKoruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Depending on the application, the mills are installed vertical or horizontal. The standard version has a step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. voir moins |  |
| High-Speed Mill System Zeta® Type LMZ | NETZSCH Grinding & Dispersing | High-Speed Mill System Zeta® Type LMZ optimizes your production capacity, energy demand and quality. Designed for circulation operation and multi-pass operation, you achieve high throughput rates and high quality with a narrow particle size distribution f...voir plus High-Speed Mill System Zeta® Type LMZ optimizes your production capacity, energy demand and quality. Designed for circulation operation and multi-pass operation, you achieve high throughput rates and high quality with a narrow particle size distribution for higher viscous products. A minimal control expenditure is necessary to guarantee highest reproducibility and save additional costs.The ergonomic design, along with easy product changeover and cleaning simplifies daily operation. voir moins |  |
| Horizontal Disk Mill | NETZSCH Grinding & Dispersing | The horizontal disk mills type LME and LMK are continuous working laboratory and production machines for wide variety of applications. The disk agitator shaft activates the grinding media with high intensity through the entire grinding chamber. Highly eff...voir plus The horizontal disk mills type LME and LMK are continuous working laboratory and production machines for wide variety of applications. The disk agitator shaft activates the grinding media with high intensity through the entire grinding chamber. Highly efficient separation devices that are adapted to your application are available for separation of product and grinding media. Diverse material designs and sizes ranging from laboratory to production scale enable application-specific construction. voir moins |  |
| Laboratory Agitator Bead Mill LabStar | NETZSCH Grinding & Dispersing | Laboratory Agitator Bead Mill LabStar enables scientific academic work on difficult research and development tasks and impresses with its easy handling. The grinding results with finenesses down to the nanometer range allow an exact scale-up to production...voir plus Laboratory Agitator Bead Mill LabStar enables scientific academic work on difficult research and development tasks and impresses with its easy handling. The grinding results with finenesses down to the nanometer range allow an exact scale-up to production size machines. voir moins |  |
| MasterMill Basket Mill | NETZSCH Grinding & Dispersing | The NETZSCH MasterMill is a batchtype basket mill for ultra-fine grinding in mobile and stationary mixing hoppers. This unique system comprises separate drives for the grinding tools within the grinding basket, for both mixing-devices and devicesfor conve...voir plus The NETZSCH MasterMill is a batchtype basket mill for ultra-fine grinding in mobile and stationary mixing hoppers. This unique system comprises separate drives for the grinding tools within the grinding basket, for both mixing-devices and devicesfor conveying of the product being ground in the grinding chamber. The MasterMill can be used with various shapes of hopper that provide exceptional flexibility in production. voir moins |  |
| Microseries | NETZSCH Grinding & Dispersing | Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and ...voir plus Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and nano-scale high-tech products. The compact, universally applicable laboratory circulation mills of the MicroSeries impress with easy handling and the use of small quantities from 0.14 to 0.5 l for product sizes down to the nanometer range. voir moins |  |
| MINI-MILL PULVERISETTE 23 | FRITSCH GmbH - Milling and Sizing | For fine comminution of minimal quantities of dry laboratory samples or solids in suspensions. For mixing and homogenisation of emulsions. Input quantity up to 5 ml. |  |
| Miniseries | NETZSCH Grinding & Dispersing | Finest wet grinding technology – the laboratory mills of the MiniSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and n...voir plus Finest wet grinding technology – the laboratory mills of the MiniSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and nano-scale high-tech products. The compact, universally applicable laboratory circulation mills of the MiniSeries impress with easy handling and the use of small quantities from 0.25 to 0.5 l for product sizes down to the nanometer range. voir moins |  |
| Nanomill ZETA® RS | NETZSCH Grinding & Dispersing | The NETZSCH nano mill Zeta® RS is the next development of the worldwide known circulation mill system Zeta® type LMZ. Its field of application starts where the other agitator bead mill system Zeta® ends. The highly efficient centrifugal separation system ...voir plus The NETZSCH nano mill Zeta® RS is the next development of the worldwide known circulation mill system Zeta® type LMZ. Its field of application starts where the other agitator bead mill system Zeta® ends. The highly efficient centrifugal separation system enables the use of smallest grinding media from a diameter of 50 – 300 µm in reliable continuous operation. voir moins |  |
| NETZSCH-Beads | NETZSCH Grinding & Dispersing | The selection of the appropriate grinding beads is an outstanding characteristic for optimizing dispersing and wet grinding processes with agitator bead mills. NETZSCH-Beads offer the best grinding results. With the grinding beads ideally adapted to NETZS...voir plus The selection of the appropriate grinding beads is an outstanding characteristic for optimizing dispersing and wet grinding processes with agitator bead mills. NETZSCH-Beads offer the best grinding results. With the grinding beads ideally adapted to NETZSCH agitator bead mills and all important qualities being available in the requested sizes an optimum in the combination of machine, grinding tool and application is achieved. voir moins |  |
| PLANETARY MICRO MILL PULVERISETTE 7 CLASSIC LINE | FRITSCH GmbH - Milling and Sizing | For the finest comminution of hard to soft grinding material, dry or in suspension, down to colloidal fineness. For mixing and perfect homogenising of emulsions and pastes. Maximum sample quantity: 40 ml |  |
| Plants for Chocolate Compound Production | NETZSCH Grinding & Dispersing | Coatings, icings and fillings are differentiated by a higher fat content in the chocolate. It is primarily the vegetable fats used that determine their properties. Depending on the temperature, they are essentially responsible for the taste and viscosity ...voir plus Coatings, icings and fillings are differentiated by a higher fat content in the chocolate. It is primarily the vegetable fats used that determine their properties. Depending on the temperature, they are essentially responsible for the taste and viscosity and affect the consistency, mouth feel, aroma and melting characteristics. The plants manufactured by NETZSCH for the production of coatings, icings and fillings are modular. This modular design minimizes the space requirement on the one hand and facilitates production expansion on the other. voir moins |  |
| POWER CUTTING MILL PULVERISETTE 25 | FRITSCH GmbH - Milling and Sizing | For pre-crushing of dry, soft to medium-hard or fibrous materials and plastics. Max. feed size: 120 x 85 mm. |  |
| SECOMY® Fine Cutting Mill | NETZSCH Grinding & Dispersing | The fast operating fine cutting mills SECOMY® are the choice for the pulverization of fibrous, ductile, soft, viscoplastic or temperature-sensitive products. This type of cutting mill distinguishes itself through the optimization of number and position of...voir plus The fast operating fine cutting mills SECOMY® are the choice for the pulverization of fibrous, ductile, soft, viscoplastic or temperature-sensitive products. This type of cutting mill distinguishes itself through the optimization of number and position of the knives and the high cutting stroke rate. Machine sizes available with drive capacities from 37 to 200 kW. voir moins |  |
| SECOMY® S Fine Cutting Mill | NETZSCH Grinding & Dispersing | Fine Cutting Mills of the type SECOMY® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step proce...voir plus Fine Cutting Mills of the type SECOMY® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step process with the SECOMY®. This is possible due to an air classifier integrated into the machine housing, which replaces the traditionally-used screen mesh. A dynamic classifier wheel classifies the ground product within the mill and forms the product discharge for the fine fraction. voir moins |  |
| System RUMBA - Plants for Chocolate Production | NETZSCH Grinding & Dispersing | The RUMBA plant concept from NETZSCH is a complete process for the production of high-quality chocolate. From the basic ingredients cocoa mass, cocoa butter, sugar and perhaps milk powder, you can produce your own dark, milk or white chocolate. With very ...voir plus The RUMBA plant concept from NETZSCH is a complete process for the production of high-quality chocolate. From the basic ingredients cocoa mass, cocoa butter, sugar and perhaps milk powder, you can produce your own dark, milk or white chocolate. With very easy operation of the compact, closed RUMBA plant you can develop recipes according to individual needs. In this way, requirements from 750 kg all the way up to 6,000 kg batch size and over 100 Tons/day can be met precisely. voir moins |  |
| UNIVERSAL CUTTING MILL PULVERISETTE 19 | FRITSCH GmbH - Milling and Sizing | Working Principle: Cutting for grinding soft, medium-hard, brittle, tough, fibrous samples - Applications: Size Reduction of Plastics and Textiles, Agriculture and Forestry, Environment, RoHS, Analytic, Construction Materials, Chemistry, Foodstuffs - Max....voir plus Working Principle: Cutting for grinding soft, medium-hard, brittle, tough, fibrous samples - Applications: Size Reduction of Plastics and Textiles, Agriculture and Forestry, Environment, RoHS, Analytic, Construction Materials, Chemistry, Foodstuffs - Max. Sample Size: 70 x 80 mm - Max. Throughput: 60 l/h - Batchwise/Continuous - Final Fineness 0.25 to 6 mm - Rotor Speed: 2800 rpm. voir moins |  |
| VARIO-PLANETARY MILL PULVERISETTE 4 CLASSIC LINE | FRITSCH GmbH - Milling and Sizing | Thanks to free selection of the grinding parameters, the PULVERISETTE 4 is the ideal planetary mill for mechanical activation and alloying. The main areas of application lie in materials research and naturally anywhere that an effective, innovative labora...voir plus Thanks to free selection of the grinding parameters, the PULVERISETTE 4 is the ideal planetary mill for mechanical activation and alloying. The main areas of application lie in materials research and naturally anywhere that an effective, innovative laboratory planetary mill is required. voir moins |  |
| VIBRATORY MICRO MILL PULVERISETTE 0 | FRITSCH GmbH - Milling and Sizing | For fine comminution of dry laboratory samples or solids in suspension. For homogenisation of emulsions or pastes. The Vibratory Micro Mill PULVERISETTE 0 is recommended for sample preparation of RoHS tests (Restriction of Hazardous Substances). |  |
