| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...voir plus ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. voir moins | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...voir plus ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. voir moins | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. | FD-804 is an aluminate coupling agent. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in resins containing -OH. | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. | FD-805 is aluminum-iv-acetylacetonate supplied as a white powder. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in some special resins. | |
| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...voir plus ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. voir moins | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...voir plus Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. voir moins | |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...voir plus Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. voir moins | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...voir plus Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. voir moins | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...voir plus Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. voir moins | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...voir plus AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. voir moins | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...voir plus AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. voir moins | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...voir plus AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. voir moins | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...voir plus AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. voir moins | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...voir plus AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. voir moins | |
| Aquapel (Ink Additive) | Shamrock Technologies b.v.b.a. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies b.v.b.a. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...voir plus AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. voir moins | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...voir plus AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. voir moins | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...voir plus AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. voir moins | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...voir plus ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. voir moins | |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...voir plus ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. voir moins | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...voir plus ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution voir moins | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...voir plus ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. voir moins | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...voir plus ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution voir moins | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...voir plus ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution voir moins | |
| B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...voir plus B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. voir moins | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...voir plus Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. voir moins | |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...voir plus Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. voir moins | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...voir plus BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. voir moins | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...voir plus BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. voir moins | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...voir plus BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. voir moins | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...voir plus BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. voir moins | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...voir plus BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. voir moins | Request Sample |
| BECKOCURE™ EH 2261w/41WA | Allnex | BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...voir plus BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. voir moins | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...voir plus BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. voir moins | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...voir plus BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. voir moins | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...voir plus BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. voir moins | Request Sample |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...voir plus Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. voir moins | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...voir plus BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. voir moins | Request Sample |
| BECKOPOX™ VEH 2106w/80WA | Allnex | Beckopox® VEH 2106W/80WA is an aliphatic polyamine adduct that is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA is a waterborne non-acetic acid containing aliphatic polyamine adduct used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| Benox® A-70 | UNITED INITIATORS GMBH & CO KG | Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...voir plus Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. voir moins | |
| Benox® A-75 | UNITED INITIATORS GMBH & CO KG | Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...voir plus Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. voir moins | |
| Benox® A-80 | UNITED INITIATORS GMBH & CO KG | Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...voir plus Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. voir moins | |
| Benox® B-50 | UNITED INITIATORS GMBH & CO KG | Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...voir plus Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...voir plus BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. voir moins | |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...voir plus BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. voir moins | |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...voir plus BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. voir moins | |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| Benzotriazole | Chemceed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...voir plus Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. voir moins | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...voir plus Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. voir moins | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...voir plus Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. voir moins | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...voir plus BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. voir moins | |
| BIT-10 | Dalian Bio-Chem Co., Ltd. | BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1. | |
| BIT-20 | Dalian Bio-Chem Co., Ltd. | BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2. | |
| BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...voir plus BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. voir moins | |
| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...voir plus BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. voir moins |
