| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...voir plus 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. voir moins | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...voir plus 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| α-Pyrrolidone | Shanghai WellTone Material Technology Co., Ltd. | α-Pyrrolidone is a colorless high boiling point polar solvent and also an organic synthetic intermediate product. As to this kind of solvent, it can be used to produce synthetic resin, pesticide, polyvalent alcohol, printing inks and iodine. | |
| Alinco™ M-25 Linseed Oil | ADM | Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...voir plus Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Q Linseed Oil | ADM | Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ X Linseed Oil | ADM | Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Y Linseed Oil | ADM | Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z Linseed Oil | ADM | Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...voir plus Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-1 Linseed Oil | ADM | Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-2 Linseed Oil | ADM | Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-3 Linseed Oil | ADM | Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-4 Linseed Oil | ADM | Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-5 Linseed Oil | ADM | Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z-6 Linseed Oil | ADM | Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...voir plus Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alinco™ Z/2-Z/3 Linseed Oil | ADM | Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...voir plus Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. voir moins | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...voir plus Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. voir moins | |
| Amino C Acid | Hainan Zhongxin Chemical Co., Ltd. | Amino C Acid is a grey powder with the molecular formula of C10H9NO6S2. It has an amino content of between 70 - 80 % minimum and an HPLC purity of 97%. Amino C Acid is primarily used as an intermediate in the production of reactive and direct dyes. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Bis-MPA™ | Perstorp | Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications. | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...voir plus Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. voir moins | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins | |
| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...voir plus Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. voir moins | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...voir plus Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...voir plus Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...voir plus Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Diacetone Alcohol | Monument Chemical | Diacetone Alcohol is a colorless, clear liquid ketone alcohol. It is intended for use as a chemical intermediate in the preparation of Methyl Isobutyl Ketone and Hexylene Glycol. This product is used in household cleaners, pharmaceutical preparations, sea...voir plus Diacetone Alcohol is a colorless, clear liquid ketone alcohol. It is intended for use as a chemical intermediate in the preparation of Methyl Isobutyl Ketone and Hexylene Glycol. This product is used in household cleaners, pharmaceutical preparations, sealants, inks, industrial coatings, pesticides, paints, primers, paint thinners and paint removers. voir moins | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| Dipropylene Glycol Mono-Methyl Ether Acetate | Monument Chemical | Dipropylene Glycol Mono-Methyl Ether Acetate is an organic compound that is a colorless to yellow, clear liquid that has a sweet odor. It is used in industrial settings for paints, coatings, and silk screen inks. This product can also be found in varnish,...voir plus Dipropylene Glycol Mono-Methyl Ether Acetate is an organic compound that is a colorless to yellow, clear liquid that has a sweet odor. It is used in industrial settings for paints, coatings, and silk screen inks. This product can also be found in varnish, lacquer, and spray paint. voir moins | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...voir plus DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. voir moins | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...voir plus DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. voir moins | |
| DPHA | Allnex | DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure ...voir plus DPHA (Acrylated dipentaerythritol) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure response, hardness and scratch/abrasion resistance are desired. DPHA is composed predominately of the penta- and hexa-acrylate esters of dipentaerythritol, with the overall composition represented by the included chemical structure. voir moins | Request Sample |
| EBECRYL® 896 | Allnex | EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and ...voir plus EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. voir moins | Request Sample |
| EBECRYL® MPDDA | Allnex | EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combinat...voir plus EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance. voir moins | Request Sample |
| EBECRYL® TMPTMA | Allnex | EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated r...voir plus EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated resins. voir moins | Request Sample |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Fumaric Acid | Bartek Ingredients Inc. | Fumaric Acid is an organic, non-hygroscopic white crystal. It is made from N-butane that is oxidized into maleic acid which is then isomerized into fumaric acid. It finds application in printing inks. | |
| Glutaric Anhydride | Chemoxy International Ltd | Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, part...voir plus Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, particularly modified unsaturated linear (epoxy) polyesters with interesting effects on cure speed and reactivity. voir moins | |
| Glycidyl Methacrylate (GMA) High Purity | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy che...voir plus Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 98.5%. Glycidyl Methacrylate (GMA) High Purity can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. voir moins | |
| Glycidyl Methacrylate (GMA) Regular Grade | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy c...voir plus Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 97.5%. Glycidyl Methacrylate (GMA) Regular Grade can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. voir moins | |
| Haltanol | Monument Chemical | Haltanol, also known as Haltanol Ester Alcohol, is a high boiling, colorless, clear liquid ester-alcohol coalescing solvent. It is used mainly used as a industrial coating solvent in latex paints but can also be used as a chemical intermediate which is co...voir plus Haltanol, also known as Haltanol Ester Alcohol, is a high boiling, colorless, clear liquid ester-alcohol coalescing solvent. It is used mainly used as a industrial coating solvent in latex paints but can also be used as a chemical intermediate which is converted to other chemical substances that are then used in plasticizers. This product is also used to produce adhesives, inks. dyestuffs, detergents, cleaning agents, surface treatment agents, fertilizers, and as a solvent. voir moins | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...voir plus Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. voir moins | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...voir plus Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. voir moins | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...voir plus Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. voir moins | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...voir plus Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. voir moins | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...voir plus Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. voir moins | |
| HS9600 | Tianyi Chemical Engineering Material Co., Ltd. | HS9600, in the form of a transparent liquid, is a reactive monomer resin that can be used to synthesize highly functional group polyurethane coatings or UV inks. This product has a rapid cure and crosslinks well. If one increases the number of acrylate ...voir plus HS9600, in the form of a transparent liquid, is a reactive monomer resin that can be used to synthesize highly functional group polyurethane coatings or UV inks. This product has a rapid cure and crosslinks well. If one increases the number of acrylate or methacrylic ester optical activity groups, it will show high rigidity and will dilute well. voir moins | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...voir plus HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. voir moins | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...voir plus Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. voir moins | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...voir plus Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...voir plus Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. voir moins | |
| KOMERATE A0010 | Green Chemical Co., Ltd. | KOMERATE A0010 is an aliphatic monofunctional acrylate monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A0010M | Green Chemical Co., Ltd. | KOMERATE A0010M is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and excellent solvency. | |
| KOMERATE A0016 | Green Chemical Co., Ltd. | KOMERATE A0016 is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and good compatibility. |
