| ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...voir plus ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. voir moins | Request Sample |
| ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...voir plus ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. voir moins | Request Sample |
| ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formula...voir plus ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. voir moins | Request Sample |
| ADDITOL® VXL 4930 N | Allnex | ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. | Request Sample |
| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| ADDITOL® VXW 6503 N | Allnex | ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling wi...voir plus ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling without foam stabilisation. voir moins | Request Sample |
| ADDITOL® XL 109/50LG | Allnex | ADDITOL® XL 109/50LG is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films. | Request Sample |
| ADDITOL® XL 121 N | Allnex | ADDITOL® XL 121 N -flow/leveling/levelling- is a paint additive to enhance mar resistance and levelling of air drying and stoving paints, particularly for silicone modified air drying and stoving alkyd resins. | Request Sample |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| ADDITOL® XL 480 | Allnex | Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc...voir plus Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc. It also prevents surface defects of paint films. voir moins | Request Sample |
| ADDITOL® XL 490 | Allnex | Additol® XL 490 is a levelling and anticrater agent for enhancing the surface quality of paint film, without silicon addition. | Request Sample |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| ADDITOL® XW 395 | Allnex | Additol® XW 395 is a levelling, wetting and antifloating agent, for waterborne paint systems. | Request Sample |
| ADDITOL® XW 6580 | Allnex | ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam...voir plus ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam stabilization. voir moins | Request Sample |
| AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
| AEROXIDE® Alu C 805 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® Alu C 805 is a very fine pyrogenic Aluminium Oxide treated with octylsilane. It is used in powder coatings and toner to improve flowability and in plastic powders, such PVC, to prevent adhesion and agglomeration to protect the powders from moist...voir plus AEROXIDE® Alu C 805 is a very fine pyrogenic Aluminium Oxide treated with octylsilane. It is used in powder coatings and toner to improve flowability and in plastic powders, such PVC, to prevent adhesion and agglomeration to protect the powders from moisture. voir moins | Request Sample |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...voir plus AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. voir moins | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...voir plus AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. voir moins | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...voir plus AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. voir moins | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...voir plus AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. voir moins | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...voir plus AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. voir moins | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...voir plus AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. voir moins | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...voir plus AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. voir moins | |
| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...voir plus ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. voir moins | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...voir plus BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. voir moins | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...voir plus BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. voir moins | |
| BYK®-302 FOR INKS | BYK | A silicone surface additive with medium reduction of surface tension of printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-331 FOR INKS | BYK | A silicone surface additive with medium reduction of surface tension of printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-345 FOR INKS | BYK | A silicone surfactant to improve substrate wetting of aqueous printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-346 FOR INKS | BYK | A silicone surfactant to improve substrate wetting of aqueous printing inks and overprint varnishes. Solution of a polyether modified polydimethylsiloxane. | |
| BYK®-347 FOR INKS | BYK | A silicone surfactant to improves substrate wetting of aqueous printing inks and overprint varnishes. Polyether modified siloxane. | |
| BYK®-348 FOR INKS | BYK | A silicone surfactant to improves substrate wetting of aqueous printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-354 FOR INKS | BYK | Acrylic leveling additives for printing inks and overprint varnishes. Solution of a polyacrylate. | |
| BYK®-361 N FOR INKS | BYK | Acrylic leveling additive for printing inks and overprint varnishes. Polyacrylate. | |
| BYK®-377 FOR INKS | BYK | A silicone surface additive with strong surface tension reduction for radiation curable printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-381 FOR INKS | BYK | Leveling additive for printing inks and overprint varnishes. Solution of a polyacrylate, ionic. | |
| BYK®-UV 3500 FOR INKS | BYK | A surface additive for radiation curing printing inks and overprint varnishes. Polyether modified acryl functional polydimethylsiloxane. | |
| BYK®-UV 3510 FOR INKS | BYK | A surface additive for radiation curing printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. | |
| BYK®-UV 3530 FOR INKS | BYK | A surface additive for radiation curing printing inks and overprint varnishes. Polyether modified acryl functional polydimethylsiloxane. | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...voir plus CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...voir plus CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...voir plus CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...voir plus CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...voir plus CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...voir plus CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...voir plus CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. voir moins | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...voir plus Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. voir moins | |
| DISPERBYK®-168 FOR INKS | BYK | High molecular weight wetting and dispersing additives for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-182 FOR INKS | BYK | High molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| Dynax DX4000 | Dynax Corporation | Dynax DX4000 is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 35% active ingredients. Dynax DX4000 imparts enhanced spreading, wetting, and leveling properties to wa...voir plus Dynax DX4000 is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 35% active ingredients. Dynax DX4000 imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. voir moins | |
| Dynax DX4005N | Dynax Corporation | Dynax DX4005N is a yellow-colored, slightly anionic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and fl...voir plus Dynax DX4005N is a yellow-colored, slightly anionic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. voir moins | |
| Dynax DX4010N | Dynax Corporation | Dynax DX4010N is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 45% active ingredients. Dynax DX4010N imparts enhanced spreading, wetting, and leveling properties to w...voir plus Dynax DX4010N is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 45% active ingredients. Dynax DX4010N imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. voir moins | |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...voir plus Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...voir plus Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...voir plus Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...voir plus Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining exce...voir plus Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining excellent clarity. Dynoadd® F-106 has applications as a automotive OEM clear coat. voir moins | |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...voir plus Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. voir moins | |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...voir plus Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...voir plus Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...voir plus Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. voir moins | |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...voir plus Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. voir moins | |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...voir plus Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. voir moins | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...voir plus Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. voir moins | |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...voir plus Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...voir plus Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. voir moins | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...voir plus Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. voir moins | |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...voir plus Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. voir moins | |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...voir plus Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. voir moins | |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...voir plus Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. voir moins | |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...voir plus Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. voir moins | |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...voir plus Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. voir moins | |
| Eastman™ Cellulose Acetate Butyrate (CAB-531-1) | Eastman Chemical B.V. | Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resi...voir plus Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman™ CAB-531-1 esters are soluble in a wide range of solvents. It is a flexible resin requiring lower plasticizer modification. Eastman™ CAB-531-1 is used for food contact applications, nail care, and coatings for automotive plastics. voir moins | |
| Eastman Solus™ 2100 | Eastman Chemical B.V. | Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sandi...voir plus Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sanding, excellent anti-sag behavior, faster dry to touch time, improved gloss, and wider window of polishability. voir moins | |
| EDAPLAN® LA 403 | Munzing Chemie | EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free,...voir plus EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free, water resistance is not affected, prevents surface defects, and reduction of foam tendency. Main application areas include chemical curing systems, e.g. wood coatings, automotive, OEM and repair coatings, industrial coatings, 2K-systems, and printing inks and overprint varnishes. voir moins | |
| EDAPLAN® LA 452 | Munzing Chemie | EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA ...voir plus EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. Advantages of using EDAPLAN® LA 452 include gloss improvement and reduction of haze, prevention of surface defects like craters and Bénard cells, improvement of substrate wetting, no increase in foam, and good recoatability. Main application areas include architectural coatings, wood and furniture coatings, automotive OEM and repair coatings, industrial coatings, and printing inks and overprint varnishes. voir moins | |
| HB-132 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...voir plus HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. voir moins | |
| HB-135 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...voir plus HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. voir moins | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...voir plus HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. voir moins | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...voir plus HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. voir moins | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...voir plus HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. voir moins | |
| HB-630 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is d...voir plus HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is designed for use in coatings, inks, and printing toners. voir moins | |
| HEXAFOR™ 612 | Maflon SRL | HEXAFOR™ 612 is an anionic pale yellow to amber clear liquid. It is used as a fluorinated surfactant to improve levelling and wetting and to reduce surface tension at low concentrations. HEXAFOR™ 612 can be used in paint, varnish, ink, wax, polish, and ad...voir plus HEXAFOR™ 612 is an anionic pale yellow to amber clear liquid. It is used as a fluorinated surfactant to improve levelling and wetting and to reduce surface tension at low concentrations. HEXAFOR™ 612 can be used in paint, varnish, ink, wax, polish, and adhesive applications. voir moins | |
| HEXAFOR™ 643 | Maflon SRL | HEXAFOR™ 643 is a non-ionic yellow to amber, viscous liquid. It is used as a fluorosurfactant to improve wetting and levelling, and reduce surface tension and cratering. HEXAFOR™ 643 can be used in paint, coating, wax, polish, adhesive, caulk, and graphic...voir plus HEXAFOR™ 643 is a non-ionic yellow to amber, viscous liquid. It is used as a fluorosurfactant to improve wetting and levelling, and reduce surface tension and cratering. HEXAFOR™ 643 can be used in paint, coating, wax, polish, adhesive, caulk, and graphic art applications. voir moins | |
| HEXAFOR™ 643-D | Maflon SRL | HEXAFOR™ 643-D is a yellow to light yellow liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce orange peel effect and to increase wetting, spreading, and levelling. HEXAFOR™ 643-D can be used in paint, coating, adhesiv...voir plus HEXAFOR™ 643-D is a yellow to light yellow liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce orange peel effect and to increase wetting, spreading, and levelling. HEXAFOR™ 643-D can be used in paint, coating, adhesive, caulk, and graphic art applications. voir moins | |
| HEXAFOR™ 644 | Maflon SRL | HEXAFOR™ 644 is a yellow to amber viscous liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce surface and interface tension, improve wetting and levelling, and reduce cratering. HEXAFOR™ 644 can be used for paint, coat...voir plus HEXAFOR™ 644 is a yellow to amber viscous liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce surface and interface tension, improve wetting and levelling, and reduce cratering. HEXAFOR™ 644 can be used for paint, coating, wax, polish, adhesive, caulk, and graphic art applications. voir moins | |
| HEXAFOR™ 670 | Maflon SRL | HEXAFOR™ 670 is a non-ionic colorless to pale yellow, viscous liquid. It is used as a fluorosurfactant to improve wetting, levelling, antisoiling, antifogging, and UV resistance and to reduce surface tension at low concentrations. HEXAFOR™ 670 can be used...voir plus HEXAFOR™ 670 is a non-ionic colorless to pale yellow, viscous liquid. It is used as a fluorosurfactant to improve wetting, levelling, antisoiling, antifogging, and UV resistance and to reduce surface tension at low concentrations. HEXAFOR™ 670 can be used in paint, coating, ink, wax, polish, and adhesive applications. voir moins | |
| HEXAFOR™ 672 | Maflon SRL | HEXAFOR™ 672 is a colorless to pale yellow clear liquid that is non-ionic in nature. It is used as a a fluorosurfactant to reduce surface tension. HEXAFOR™ 672 can be used in paint, coating, ink, wax, polish, graphic art, and adhesive applications. | |
| HEXAFOR™ 675 | Maflon SRL | HEXAFOR™ 675 is a non-ionic clear liquid. It is used as a fluorosurfactant to improve wetting and reduce surface tension at low concentrations. HEXAFOR™ 675 can be used in paint, coating, ink, wax, polish, and adhesive applications. | |
| HEXAFOR™ 678 | Maflon SRL | HEXAFOR™ 678 is a non-ionic colorless to pale yellow liquid. It is used as a fluorosurfactant to improve wetting and levelling and to reduce surface tension at low concentrations. HEXAFOR™ 678 can be used for paint, coating, ink, wax, polish, graphic art,...voir plus HEXAFOR™ 678 is a non-ionic colorless to pale yellow liquid. It is used as a fluorosurfactant to improve wetting and levelling and to reduce surface tension at low concentrations. HEXAFOR™ 678 can be used for paint, coating, ink, wax, polish, graphic art, and adhesive applications. voir moins | |
| HEXAFOR™ 678-D | Maflon SRL | HEXAFOR™ 678-D is a non-ionic colorless to pale yellow clear liquid. It is used as a fluorosurfactant to improve wetting and levelling and reduce surface tension at low concentrations. HEXAFOR™ 678-D can be used in paint, coating, ink, wax, polish, graphi...voir plus HEXAFOR™ 678-D is a non-ionic colorless to pale yellow clear liquid. It is used as a fluorosurfactant to improve wetting and levelling and reduce surface tension at low concentrations. HEXAFOR™ 678-D can be used in paint, coating, ink, wax, polish, graphic art, and adhesive applications. voir moins | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...voir plus HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...voir plus HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...voir plus HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...voir plus Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. voir moins | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| METOLAT® 288 | Munzing Chemie | METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling,...voir plus METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling, especially in low viscosity systems. Main applications include overprint varnishes, container coatings (ext.), printing inks, wood coatings, and adhesives. voir moins | |
| MODAFLOW® 2100 | Allnex | Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. | Request Sample |
