| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...voir plus Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). voir moins | Request Sample |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...voir plus Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | |
| TEGO® Airex 923 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown. | Request Sample |
| BYK®-A 501 FOR UP RESINS | BYK | It is a silicone-free air release additive for unsaturated polyester, epoxy and PUR resins. Recommended applications include epoxy resins and PUR-systems. | |
| TEGO® Airex 904 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility. | Request Sample |
| TEGO® Airex 902 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam. | Request Sample |
| TEGO® Airex 901 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications. | Request Sample |
| SURFYNOL® 118 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any fi...voir plus SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects. voir moins | Request Sample |
| PC-1344™ Defoamer | Allnex | PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an abili...voir plus PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ contains no silicone. PC-1344™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. voir moins | Request Sample |
| PC-1244™ Defoamer | Allnex | PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has d...voir plus PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244® contains no silicone. PC-1244® Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. voir moins | Request Sample |
| TEGO® Airex 978 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications. | Request Sample |
| MODAFLOW® 2100 | Allnex | Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...voir plus TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. voir moins | Request Sample |
| MODAFLOW® EPSILON | Allnex | Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and...voir plus Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. voir moins | Request Sample |
| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...voir plus ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. voir moins | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coatin...voir plus TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications. voir moins | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particu...voir plus TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying. voir moins | Request Sample |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...voir plus TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. voir moins | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901...voir plus TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying. voir moins | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...voir plus TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. voir moins | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...voir plus TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. voir moins | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...voir plus Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....voir plus Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. voir moins | |
| TEGO® Airex 902 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air s...voir plus TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air spraying applications as well as for brush and roller applications. It is also recommended for use in self-leveling floor coatings. voir moins | Request Sample |
| TEGO® Airex 920 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable fo...voir plus TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable for flexo and gravure printing. It is also suitable for compressed air spraying, as well as for dip coating, flow coating, and curtain coating voir moins | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...voir plus Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. voir moins | |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...voir plus Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. voir moins | |
| ADDITOL® VXL 4992 | Allnex | ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pig...voir plus ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pigment and filler concentration, improves the air release, and has better levelling and flow properties of the ready product. voir moins | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...voir plus Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. voir moins | |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. T...voir plus Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. voir moins | Request Sample |
| TEGO® Airex 904 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for ai...voir plus TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for airless spraying applications. It is also suitable for compressed air spraying and brush/roller applications. Haziness, caused by low temperatures, is reversible and does not affect the performance properties of TEGO® Airex 904 W. voir moins | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...voir plus TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. voir moins | Request Sample |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...voir plus Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. voir moins | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...voir plus BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. voir moins | |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...voir plus Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. voir moins | Request Sample |
| PC 1644™ Defoamer | Allnex | PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam co...voir plus PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244®. PC-1644™ is silicone-free and exhibits very low odor. voir moins | Request Sample |
| PC-4144-DEFOAMER | Allnex | PC-4144 is a highly efficient defoamer for metal working fluids and metal working fluid emulsions with very low VOC content ( Active substance approx. 100 % \r\n\r\n. | Request Sample |
| PC-2544™ Defoamer | Allnex | PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty appl...voir plus PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty applications where efficient high temperature performance is required. voir moins | Request Sample |
| TEGO® Foamex 883 | Evonik Operations GmbH, BL Coating Additives | Le TEGO® Foamex 883 est un débullant concentré hautement efficace à base de polyéther siloxane. Bonne efficacité à long terme contre la mousse. | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...voir plus PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. voir moins | Request Sample |
| PC-1844™ Defoamer | Allnex | PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoame...voir plus PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. voir moins | Request Sample |
| BYK®-028 FOR INKS | BYK | A silicone defoamer for aqueous printing inks. It is also the standard defoamer for aqueous systems and the basis for testing a defoamer series. | |
| TEGO® Foamex 8050 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8050 is a highly effective defoamer concentrate based on polyether siloxane technology. Highly suitable as grinding defoamer. | Request Sample |
| ADDITOL® WT 101 DF-S | Allnex | ADDITOL® WT 101 DF-S is a water and waste water treatment defoamer. Modified silicone defoamer emulsion (20% active). Emulsifier free technology. | Request Sample |
| Surfadol® 520 | ACME | Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-...voir plus Surfadol® 520 is a 20% active liquid nonionic molecular defoamer (Polyethylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 532 | ACME | Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-f...voir plus Surfadol® 532 is a 32% active liquid nonionic molecular defoamer (Dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 550 | ACME | Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fre...voir plus Surfadol® 550 is a 50% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 532B | ACME | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...voir plus Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| Surfadol® 550P | ACME | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...voir plus Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| DEE FO® XRM-1537A | Munzing Chemie | DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for pr...voir plus DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for press-side use. voir moins | |
| Surfadol® DF-59 | ACME | Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, ...voir plus Surfadol® DF-59 is a 100% active liquid nonionic molecular defoamer. It is a mixture of ethoxylated acetylenic diols that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is solvent and APE-free. voir moins | |
| Surfadol® 518 | ACME | Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting f...voir plus Surfadol® 518 is an 18% active liquid nonionic molecular defoamer (ethylene glycol and dipropylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. voir moins | |
| BYK®-057 FOR INKS | BYK | It is a silicone-free defoamer for solvent-borne, solvent-free printing inks, and overprint varnishes. It is especially recommended as defoamer for solvent free UV curing printing inks. | |
| TEGO® Foamex 26 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 26 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product is a universal defoamer for the mill base, and it prevents micro- and macro-foam. | Request Sample |
| TEGO® Foamex 27 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 27 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 811 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 812 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 812 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| DEE FO® 3010E/50 | Munzing Chemie | DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is c...voir plus DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is commonly used for corrugated, film and foil, press-side and screen ink printing inks. voir moins | |
| ADDITOL® XW 6569 | Allnex | ADDITOL® XW 6569 is a modified silicone based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective defoamer is easy to incorporate into all waterborne paint systems. | Request Sample |
| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| ADDITOL® WT 102 DF-M | Allnex | ADDITOL® WT 102 DF-M is a water and waste water treatment defoamer. Highly refined mineral oil / wax defoamer (100% active). Improved foam lamella penetration for highly effective macro foam destruction. For all WW treatment process stages. | Request Sample |
| DEE FO® PI-35 | Munzing Chemie | DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and d...voir plus DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and during final ink formulations of various printing inks. It is commonly used in most corrugated, packaging, envelope, metallic inks, news inks, and coatings for flooring. voir moins | |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| DAPRO® DF 21 | Elementis | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...voir plus DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. voir moins | |
| ADDITOL® WT 103 DF-S | Allnex | ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation uni...voir plus ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation units, membrane reactors). Highly effective at low dosages. voir moins | Request Sample |
| DEE FO® PI-12 | Munzing Chemie | DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated pape...voir plus DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated paper, packaging, film and foil. voir moins | |
| ADDITOL® XW 393 | Allnex | ADDITOL® XW 393 is a antifoam for waterborne paint systems, without silicone addition. | Request Sample |
| DEE FO® PG-2 | Munzing Chemie | DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance co...voir plus DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance coatings. voir moins | |
| FOAM BAN® SB-88 | Munzing Chemie | FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhes...voir plus FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhesives. voir moins | |
| FOAMTROL 410 | Munzing Chemie | FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and...voir plus FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and adhesives. voir moins | |
| TEGO® Rad 2550 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect. | Request Sample |
| DEE FO® PI-45 | Munzing Chemie | DEE FO® PI-45 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is commonly used in news printing inks and in color printing inks during the pigment grinding process. | |
| BYK®-017 FOR INKS | BYK | A silicone defoamer for waterborne pigment concentrates. Compound of foam destroying polysiloxanes and hydrophobic solids. | |
| BYK®-141 FOR INKS | BYK | Silicone defoamer for printing inks and overprint varnishes. Solution of foam destroying polymers and polysiloxanes. | |
| DEE FO® 725E | Munzing Chemie | DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, ...voir plus DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, and wood coatings, and corrugated printing ink. voir moins | |
| FOAM BAN® SB-81 | Munzing Chemie | FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing ...voir plus FOAM BAN® SB-81 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that is used for industrial fluids that is commonly used in industrial, architectural and wood coatings, as well as printing inks and adhesives. voir moins | |
| BYK®-088 FOR INKS | BYK | A silicone defoamer for printing inks and overprint varnishes. Solution of foam destroying polymers and polysiloxanes | |
| ADDITOL® XW 6584 | Allnex | ADDITOL® XW 6584 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| ADDITOL® XW 6585 | Allnex | ADDITOL® XW 6585 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...voir plus Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. voir moins | Request Sample |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...voir plus Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. voir moins | |
| ADDITOL® XW 372 N | Allnex | Additol® XW 372 N is a high-efficiency defoamer for waterborne dispersions, interior and exterior emulsion paints. | Request Sample |
| BYK®-094 FOR INKS | BYK | A silicone defoamer for aqueous inks and overprint varnishes. Compound of foam destroying polysiloxanes and hydrophobic solids. | |
| ADDITOL® XW 376 | Allnex | Additol® XW 376 is a defoamer for waterborne emulsion paints and adhesives, and synthetic resin-bound renderings. | Request Sample |
| DEE FO® PG-30 | Munzing Chemie | DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used du...voir plus DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used during pigment grinding for TiO2, color, black and universal colorants. voir moins | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| TEGO® Foamex 9 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica. | Request Sample |
| AFCONA - 2524 | AFCONA Additives Sdn Bhd | AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and ...voir plus AFCONA – 2524 is a silicone-containing defoamer in a water and hydrocarbon solvent. This white to slightly yellow emulsion functions as a defoamer in water-based polyurethane and acrylic-based emulsions. AFCONA – 2524 can be used as a levelling agent and is easy to incorporate under low shear forces, finding application in coatings and printing inks. voir moins | |
| BYK®-023 FOR INKS | BYK | A silicone defoamer for aqueous printing inks and overprint varnishes. Emulsion of foam destroying polysiloxanes, hydrophobic solids and emulsifiers. | |
| BYK®-024 FOR INKS | BYK | Silicone defoamer for aqueous printing inks and overprint varnishes. Mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. | |
| TEGO® Foamex 852 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations. | Request Sample |
| DEE FO® PG-20 | Munzing Chemie | DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increas...voir plus DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increase filling and color strength. It is commonly used in high performance coatings and water-based inks. voir moins | |
| TEGO® Foamex 18 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 18 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil. | Request Sample |
| TEGO® Foamex 810 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 810 is a compatible and highly effective defoamer concentrate for the grinding and let-down stage. It is a slightly hazy liquid polyether siloxane copolymer, and contains fumed silica. TEGO® Foamex 810 is universally applicable as a millbase ...voir plus TEGO® Foamex 810 is a compatible and highly effective defoamer concentrate for the grinding and let-down stage. It is a slightly hazy liquid polyether siloxane copolymer, and contains fumed silica. TEGO® Foamex 810 is universally applicable as a millbase defoamer. It has a good effectiveness against micro-foam when used in the let-down stage. It is highly suitable for compressed air spraying and for flexo/gravure printing. It also for airless spraying and brush/roller applications. voir moins | Request Sample |
| ADDITOL® VXW 6211 | Allnex | ADDITOL® VXW 6211 is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration. | Request Sample |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| DEE FO® PI-320 | Munzing Chemie | DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packagi...voir plus DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packaging, and film and foil printing inks, as well as OPV's and clear, wood, top, high gloss architectural and industrial spray coatings. voir moins | |
| DEE FO® PI-547 | Munzing Chemie | DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids c...voir plus DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids content coatings and printing ink. It is also used for aqueous ink systems include flexible film, OPV and metallic. voir moins |
