| RESYDROL® EZ 6635wcat/35WA | Allnex | RESYDROL® EZ 6635wcat/35WA is a self-crosslinking, bismuth catalized, thermosetting CED binder. It is used for the formulation of CED-coatings for industrial applications. Depending on the coatings formulation, film thickness can be adjusted between 20 an...voir plus RESYDROL® EZ 6635wcat/35WA is a self-crosslinking, bismuth catalized, thermosetting CED binder. It is used for the formulation of CED-coatings for industrial applications. Depending on the coatings formulation, film thickness can be adjusted between 20 and 45 μm. For the formulation, pigment pastes based on cationic grinding resins are necessary. voir moins | Request Sample |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...voir plus Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. voir moins | |
| SETATHANE® D 1150 | Allnex | SETATHANE® D 1150 is a branched, castor oil-based polyol in the formulation of tough-elastic coatings. | Request Sample |
| AMBERYL 840 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of inks and lacquers. | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...voir plus Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. voir moins | |
| SETALUX® D A 1060 BA | Allnex | SETALUX® D A 1060 BA is used in the formulation of air-drying and stoving automotive refinish and industrial coatings. | Request Sample |
| CRYLCOAT® 2443-3 | Allnex | CRYLCOAT® 2443-3 is a tribo enhanced carboxyl functional polyester resin for the formulation of powder coatings with 7% TGIC. | Request Sample |
| SETATHANE® D 1145 | Allnex | SETATHANE® D 1145 is a branched, castor oil-based polyol used In the formulation of hard and tough coatings and synthetic resin mortars. | Request Sample |
| RESISTHERM™ AI 244 L | Allnex | RESISTHERM® AI 244 L can be used as a binder for the formulation of one-component baking coatings with outstanding resistance to heat and chemicals. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation...voir plus ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. voir moins | Request Sample |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| AMBERYL 1098 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to penta modified rosin. Recommended for the formulation of adhesives and can be used also in oil resin varnishes and paints. | |
| AMBERYL GR 740 | Polimeros Sinteticos, S.A de C.V | The ester of glycerin rosin (pitch). Mainly recommended for the formulation of adhesives, may be employed in coatings and compounds that require a medium-hard thermoplastic resin. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| EBECRYL® 4744 | Allnex | EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with o...voir plus EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with other binders to set specific properties. EBECRYL® 4744 is used in the formulation of UV/EB coatings for wood, furniture, paper, parquet and films applied by roll, spray and curtain coating processes. voir moins | Request Sample |
| CYMEL® 250 | Allnex | CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 resin can achieve lower VOC, compared to a formulation...voir plus CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin. voir moins | Request Sample |
| ROSKYDAL® K 58 | Allnex | ROSKYDAL® K 58 can be used as a binder in the formulation of highly filled UP knifing fillers with good sandability and good adhesion on all automotive substrates. | Request Sample |
| AMBERYL 880 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to a partially esterified fumaric adduct. Mainly recommended for the formulation of inks flexo alcohol, acetates or mixtures thereof or water and gravure inks. | |
| SETAQUA® B E 356 | Allnex | SETAQUA® B E 356 is a water-thinnable, oil-free, saturated polyester with good resistance to hydrolysis used as a binder in the formulation of stoving top coats and primers. | Request Sample |
| EBECRYL® 4266 | Allnex | EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...voir plus EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. voir moins | Request Sample |
| ROSKYDAL® E 65 | Allnex | ROSKYDAL® E 65 is an unsaturated polyester resin, which is used as a flexibilizing resin for wax-free polyester and amine-accelerated resins used in the formulation of knifing and spray fillers. | Request Sample |
| SETALUX® D A 160 SN | Allnex | Setalux D A 160 SN polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N, in the formulation of two-component polyurethane coatings with good lightfastness and resistance to chalking. | Request Sample |
| AMBERYL 875 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Mainly recommended for the formulation of flexographic inks in alcohol, acetate or mixture thereof in water or as an additive in nitrocellulose lacquers. | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| DAOTAN® VTW 6460/35WA | Allnex | Daotan® VTW 6460/35WA is an aqueous polyurethane dispersion, solvent-free. It is suitable for the formulation of aqueous, ambient temperature or force dried industrial coatings - especially aqueous basecoats for the automotive industry. | Request Sample |
| SETAL® D RD 181 X | Allnex | SETAL® D RD 181 X is a polyester resin polyol for 2k Isocyanate coatings both pigmented and clear which have excellent weathering and yellowing resistance. It's also suitable for formulation of pigment pastes. | Request Sample |
| RESYDROL® AY 430w/42WA | Allnex | Resydrol® AY 430W/42WA is an oxidatively drying, ammonia neutralized alkyd-acrylic hybrid system as aqueous emulsion. It is suited for the formulation of decorative paints to be used on wood or iron substrates. | Request Sample |
| ALQUIMEX SC-70X | Polimeros Sinteticos, S.A de C.V | Alkyd resin cut chain of soybean oil. Fast drying to the touch, and offers good gloss and leveling. Recommended for the formulation of fast drying enamels, industrial finishes and wood funds for two components. | |
| CRYLCOAT® 4688-2 | Allnex | CRYLCOAT® 4688-2 is a carboxylated polyester resin for the formulation of flexible superdurable powder coatings with Primid® XL-552. Coatings based on CRYLCOAT® 4688-2 can be used for agricultural and construction equipment. | Request Sample |
| RESYDROL® AN 6481w/70BBP | Allnex | Resydrol® AN 6481W/70BBP is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. | Request Sample |
| SETALUX® D A 960 SN | Allnex | Setalux D A 960 SN is a polyisocyanate cross-linking acrylic resin used in combination usually with Desmodur® N grades for the formulation of two-component olyurethane coatings with good light fastness and chalking resistance. | Request Sample |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
| SETALUX® D A 575 X | Allnex | Setalux D A 575 X is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N grades, in the formulation of two-component polyurethane coatings with good resistance to accelerated and outdoor weathering. | Request Sample |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
| AMBERYL 830 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas...voir plus A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas for water. voir moins | |
| RESYDROL® AY 466w/38WA | Allnex | Resydrol® AY 466W/38WA is a brown, opaque oxidatively drying acrylic modified alkyd resin as an aqueous emulsion. It is used as sole binder for the formulation of industrial topcoats which are suited for coating agricultural vehicles and construction mach...voir plus Resydrol® AY 466W/38WA is a brown, opaque oxidatively drying acrylic modified alkyd resin as an aqueous emulsion. It is used as sole binder for the formulation of industrial topcoats which are suited for coating agricultural vehicles and construction machinery. voir moins | Request Sample |
| SETALUX® D A 265 BA | Allnex | Setalux D A 265 BA is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N 75 or N 3390, in the formulation of two-component polyurethane coatings with good gloss retention, light fastness and resistance to chalking. | Request Sample |
| SETALUX® D A 365 BA/X | Allnex | Setalux D A 365 BA/X is a polyisocyanate cross-linking acrylic resin usually used in combination with Desmodur® N 75 and N 3390, in the formulation of two-component poylurethane coatings with excellent gloss retention, light fastness and chalking resistan...voir plus Setalux D A 365 BA/X is a polyisocyanate cross-linking acrylic resin usually used in combination with Desmodur® N 75 and N 3390, in the formulation of two-component poylurethane coatings with excellent gloss retention, light fastness and chalking resistance. voir moins | Request Sample |
| CRYLCOAT® 1738-2 | Allnex | CRYLCOAT® 1738-2 is a medium reactive carboxyl functional polyester resin for use in the production of 70/30 hybrid powder coatings. This resin allows the formulation of affordable powder coatings with good overall performances and good flow out and appea...voir plus CRYLCOAT® 1738-2 is a medium reactive carboxyl functional polyester resin for use in the production of 70/30 hybrid powder coatings. This resin allows the formulation of affordable powder coatings with good overall performances and good flow out and appearance. voir moins | Request Sample |
| SETATHANE® D 1156 | Allnex | SETATHANE® D 1156 is a branched, castor oil-based polyol used as as a reactive diluent in combinationwith e.g. SETATHANE® D 1145, SETATHANE® D 1150 and SETATHANE® D 1160 in the formulation of two-component polyurethane formulations and coatings to modify ...voir plus SETATHANE® D 1156 is a branched, castor oil-based polyol used as as a reactive diluent in combinationwith e.g. SETATHANE® D 1145, SETATHANE® D 1150 and SETATHANE® D 1160 in the formulation of two-component polyurethane formulations and coatings to modify physical and mechanical properties. voir moins | Request Sample |
| RESYDROL® AY 6173w/45WA | Allnex | Resydrol® AY 6173W/45WA is an air-drying, acrylic modified alkyd resin emulsion. It has corrosion protection, good adhesion on various substrates, and very good recoatability. It is a sole binder or in combination with dispersions for the formulation of w...voir plus Resydrol® AY 6173W/45WA is an air-drying, acrylic modified alkyd resin emulsion. It has corrosion protection, good adhesion on various substrates, and very good recoatability. It is a sole binder or in combination with dispersions for the formulation of wood primers. voir moins | Request Sample |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...voir plus Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. voir moins | Request Sample |
| RESINA FUMÁRICA RFAAS | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin with various polyols and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in gravure and flexographic inks, it is also soluble in alkaline water making it usable in formulas f...voir plus A partially esterified colophony resin with various polyols and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in gravure and flexographic inks, it is also soluble in alkaline water making it usable in formulas for flexographic water based inks. voir moins | |
| Tohmide TXC-245A | Sanho Chemical Co., Ltd. | Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications. | |
| CRYLCOAT® 4488-0 | Allnex | CRYLCOAT® 4488-0 is a carboxylated, superdurable polyester resin for use with TGIC in a 93/7 ratio. Systems based on CRYLCOAT® 4488-0 are suitable for use in direct-fired gas ovens and can withstand 10 years Florida outdoor exposure depending on formulation...voir plus CRYLCOAT® 4488-0 is a carboxylated, superdurable polyester resin for use with TGIC in a 93/7 ratio. Systems based on CRYLCOAT® 4488-0 are suitable for use in direct-fired gas ovens and can withstand 10 years Florida outdoor exposure depending on formulation. voir moins | Request Sample |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...voir plus Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| MACRYNAL® SM 6826w/43WA | Allnex | Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when ...voir plus Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when used in combination with water-emulsifiable polyisocyanates. voir moins | Request Sample |
| VIALKYD® AY 120/65XMPAC | Allnex | Vialkyd® AY 120/65XMPAC is an acrylic modified, hydroxyl groups containing alkyd resin. It gives fast drying brilliant car refinishing enamles with good build and finishing enamels for railroad coaches, busses, etc. It also may also be used for the formulation...voir plus Vialkyd® AY 120/65XMPAC is an acrylic modified, hydroxyl groups containing alkyd resin. It gives fast drying brilliant car refinishing enamles with good build and finishing enamels for railroad coaches, busses, etc. It also may also be used for the formulation of two coat metallic finishes. voir moins | Request Sample |
| Brasmide RW 100 | SGS Polimeros | Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished...voir plus Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished inks, primers, floor coverings, and industrial maintenance inks. voir moins | |
| VIACRYL® SC 303/60BAC | Allnex | Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combina...voir plus Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combination with cellulose acetobutyrate (CAB) for basecoats in two-coat metallics. voir moins | Request Sample |
| EBECRYL® 4683 | Allnex | EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces h...voir plus EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces hard, tough coatings particularly suited for protective coating on metal. voir moins | Request Sample |
| SETALUX® 27-1550 | Allnex | SETALUX® 27-1550 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1550 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation...voir plus SETALUX® 27-1550 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1550 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential, excellent flow and leveling, good flexibility and early water resistance. voir moins | Request Sample |
| SETALUX® 27-1551 | Allnex | SETALUX® 27-1551 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1551 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation...voir plus SETALUX® 27-1551 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1551 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential, excellent flow and leveling, good flexibility and early water resistance. voir moins | Request Sample |
| TPGDA | Allnex | TPGDA (Tripropylene glycol diacrylate) is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ult...voir plus TPGDA (Tripropylene glycol diacrylate) is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. voir moins | Request Sample |
| CYMEL® 5010 | Allnex | CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...voir plus CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. voir moins | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation...voir plus VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. voir moins | Request Sample |
| CYMEL® 1161 | Allnex | CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibili...voir plus CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings. voir moins | Request Sample |
| SETAL® 12-1646 | Allnex | SETAL® 12-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 12-1646 meets the resin requirement of Federal Paint S...voir plus SETAL® 12-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 12-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rustinhibiting, lacquer resistant primer. voir moins | Request Sample |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...voir plus Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. voir moins | |
| EBECRYL® 4666 | Allnex | EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formula...voir plus EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formulation of UV/EB energy curable coatings for wood and plastic substrates via the roller coating, spray or curtain coating processes. voir moins | Request Sample |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...voir plus The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. voir moins | |
| EBECRYL® 4220 | Allnex | EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application...voir plus EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. voir moins | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...voir plus EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. voir moins | Request Sample |
| Cinergi™ 2084 A | Lawter | Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered i...voir plus Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered ideal for use in sheet-fed inks and laser forms. voir moins | |
| AMBERYL M-15B | Polimeros Sinteticos, S.A de C.V | Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation...voir plus Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene). voir moins | |
| SETATHANE® D E 2656 | Allnex | SETATHANE® D E 2656 is suitable for formulation of coatings and mortars with high chemical resistance for the food and beverage industries. Coatings formulated with SETATHANE® D E 2656 and a diphenylmethane based diisocyanate generally exhibit very good r...voir plus SETATHANE® D E 2656 is suitable for formulation of coatings and mortars with high chemical resistance for the food and beverage industries. Coatings formulated with SETATHANE® D E 2656 and a diphenylmethane based diisocyanate generally exhibit very good resistance to organic and inorganic acids, alkalis, and solvents. Over crosslinking of 500% is typical. This optimizes chemical resistance and flow. voir moins | Request Sample |
| AMBERYL MP-25 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation...voir plus Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation of coatings for lithography and as an additive modifier of hardness and drying. voir moins | |
| AMBERYL M-15 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor a...voir plus Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene), as a film-forming resin in printing inks and as a component for some varnishes or alkyd paints. voir moins | |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...voir plus EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. voir moins | Request Sample |
| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...voir plus CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. voir moins | Request Sample |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation...voir plus UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. voir moins | Request Sample |
| RESYDROL® AY 241w/40WA | Allnex | Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are cha...voir plus Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are characterized by very rapid drying and therefore can be used for recoating after a short time of drying. voir moins | Request Sample |
| EBECRYL® 4680 | Allnex | EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coa...voir plus EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film. voir moins | Request Sample |
| CRYLCOAT® 4641-0 | Allnex | CRYLCOAT® 4641-0 is a superdurable, carboxylated polyester resin for the formulation of powder coatings with Primid® XL-552 in a 97/3 ratio. Coatings based on CRYLCOAT® 4641-0 provide outstanding weather resistance. When dry blended with CRYLCOAT® 4420-0 ...voir plus CRYLCOAT® 4641-0 is a superdurable, carboxylated polyester resin for the formulation of powder coatings with Primid® XL-552 in a 97/3 ratio. Coatings based on CRYLCOAT® 4641-0 provide outstanding weather resistance. When dry blended with CRYLCOAT® 4420-0 or CRYLCOAT® E 37179, a 60º gloss of 30 or 20 (respectively) can be obtained. voir moins | Request Sample |
| Cinergi™ 2085 A | Lawter | Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with ...voir plus Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with good holdout, gloss and rub features. It is considered suitable for use in sheet-fed inks and laser forms. voir moins | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...voir plus Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. voir moins | |
| SETATHANE® E 2017 | Allnex | SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and res...voir plus SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and resistance to organic and inorganic acids, and solvents. Overcrosslinking of 400% or more is typical. No additional water or solvent should ever be added to this. voir moins | Request Sample |
| SETALUX® 27-1590 | Allnex | SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cure, good pot-life, high solids, and low VOC formulation...voir plus SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cure, good pot-life, high solids, and low VOC formulation potential. It also exhibits excellent flow and leveling, good flexibility and early water resistance. voir moins | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly ...voir plus Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. voir moins | Request Sample |
| SETAL® 52-1646 | Allnex | SETAL® 52-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 52-1646 meets the resin requirement of Federal Paint S...voir plus SETAL® 52-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 52-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rust inhibiting, lacquer resistant primer. This is a low HAPs version of SETAL® 12-1646. voir moins | Request Sample |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...voir plus CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. voir moins | Request Sample |
| SETYRENE™ 23-3317 | Allnex | SETYRENE® 23-3317 is a high solids styrene acrylic modified copolymer alkyd possessing the desirable properties of fast set and dry speed with high gloss and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Impro...voir plus SETYRENE® 23-3317 is a high solids styrene acrylic modified copolymer alkyd possessing the desirable properties of fast set and dry speed with high gloss and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Improved flexibility may be attained via modification with C.P. Hall's Paraplex G-31 at the level of 5 to 7% on resin non-volatile. voir moins | Request Sample |
| EBECRYL® 4175 | Allnex | EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and...voir plus EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems. voir moins | Request Sample |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation...voir plus EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. voir moins | Request Sample |
| SETYRENE™ 23-3319 | Allnex | SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Improved flexibility may be attained via modification with Paraplex G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE 23-3319 will allow formulation...voir plus SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Improved flexibility may be attained via modification with Paraplex G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE 23-3319 will allow formulation of 3.5 lb/gal / 420 g/l VOC coatings. voir moins | Request Sample |
| VINNOL® E 15/40 A TF | Wacker Chemical Corporation | VINNOL® E 15/40 A TF is a hydroxyl-containing copolymer of approx. 84 wt.%vinyl chloride (VC) and approx. 16 wt.% of acrylic acid esters. Its main use is as a binder for surface coating compounds and printing inks. VINNOL® E 15/40 A TF is a thermoplastic, physically drying binder that forms a film when the solvent contained in the formulation...voir plus VINNOL® E 15/40 A TF is a hydroxyl-containing copolymer of approx. 84 wt.%vinyl chloride (VC) and approx. 16 wt.% of acrylic acid esters. Its main use is as a binder for surface coating compounds and printing inks. VINNOL® E 15/40 A TF is a thermoplastic, physically drying binder that forms a film when the solvent contained in the formulation has evaporated. It may be applied in coatings, inkjets, metal coatings, printing inks, packaging coatings and pigment preparations. voir moins | |
| EBECRYL® 4250 | Allnex | EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation...voir plus EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. voir moins | Request Sample |
| SETYRENE™ 23-3320 | Allnex | SETYRENE™ 23-3320 is a low HAPs containing copolymer alkyd. The exterior durability of the SETYRENE™ 23-3320 is improved over that of the SETYRENE™ 23-3317 and SETYRENE™ 23-3319 family of products. SETYRENE™ 23-3320 possesses the desirable properties of fast set and dry speed with high gloss, improved UV durability, and good general film performance. This resin will allow formulation...voir plus SETYRENE™ 23-3320 is a low HAPs containing copolymer alkyd. The exterior durability of the SETYRENE™ 23-3320 is improved over that of the SETYRENE™ 23-3317 and SETYRENE™ 23-3319 family of products. SETYRENE™ 23-3320 possesses the desirable properties of fast set and dry speed with high gloss, improved UV durability, and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Improved flexibility may be attained via modification with Paraplex G-31 or other similar plasticizers at the level of 5 to 7% on resin non-volatile. voir moins | Request Sample |
| UCECOAT® 2807 | Allnex | UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more det...voir plus UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more details. The product is solvent-free, tin-free, BPA-free and APEOfree. Based on tests obtained on a structural analogue, it is also non-irritant for skin and eyes. It is characterized by a low mean particle size associated with a low viscosity and an outstanding colloidal stability when used as such or in the presence of pigments and additives. It is tack-free after water evaporation and before cure. Its composition was optimized for good coating performance and low migration after cure. voir moins | Request Sample |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation...voir plus CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. voir moins | Request Sample |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...voir plus DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. voir moins | |
| CRYLCOAT® 1626-0 | Allnex | CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations. | Request Sample |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...voir plus EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. voir moins | Request Sample |
