| ADH (ADIPIC DIHYDRAZIDE) | KH Neochem Americas, Inc. | Crosslinking agent for self crosslinking emulsion resins using DAAM. | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...voir plus Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. voir moins | |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...voir plus Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. voir moins | |
| Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...voir plus Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. voir moins | |
| CN9102 | Sartomer Americas | CN9102 is a 100% reactive, allylic functional aliphatic oligomer. CN9102 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. Suggested applications i...voir plus CN9102 is a 100% reactive, allylic functional aliphatic oligomer. CN9102 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. Suggested applications include: adhesives and peroxide cure adhesives, cast polymers, coatings and high solids peroxide cure coatings, composites, and open molding composites. voir moins | |
| DMS-H03 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H11 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H21 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H25 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H31 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H41 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| HMS-013 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-031 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-064 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-071 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-082 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-151 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-301 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-501 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| HMS-H271 | Gelest, Incorporated | Hydride terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
| Lonzamon™ AATMP | Arxada | Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers ...voir plus Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. voir moins | |
| PAN-040 | Gelest, Incorporated | Catalyst for transesterification. | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...voir plus Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. voir moins | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. | |
| Polydo DP-3000 | Kukdo Chemical Co., Ltd. | Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...voir plus Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-400 | Kukdo Chemical Co., Ltd. | Polydo DP-400 polyether polyol is 400 molecular weight polyether diol. It is applied to a variety of applications. DP-400 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. | |
| Polydo DP-4000 | Kukdo Chemical Co., Ltd. | Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...voir plus Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-4000E | Kukdo Chemical Co., Ltd. | Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast e...voir plus Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. voir moins | |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...voir plus Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. voir moins | |
| Polydo ED-500 | Kukdo Chemical Co., Ltd. | Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo ED-750 | Kukdo Chemical Co., Ltd. | Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo GY-1000 | Kukdo Chemical Co., Ltd. | Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...voir plus Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-250 | Kukdo Chemical Co., Ltd. | Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...voir plus Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-3000 | Kukdo Chemical Co., Ltd. | Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...voir plus Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. voir moins | |
| Polydo GY-3000E | Kukdo Chemical Co., Ltd. | Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers. | |
| Polydo GY-3010E | Kukdo Chemical Co., Ltd. | Polydo GY-3010E polyether polyol is a glycerine initiated, nominal 3,000 molecular weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-3300E | Kukdo Chemical Co., Ltd. | Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell...voir plus Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell-opener for high resilient flexible foam and cold molded flexible foam. voir moins | |
| Polydo GY-3500 | Kukdo Chemical Co., Ltd. | Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-4000 | Kukdo Chemical Co., Ltd. | Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...voir plus Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. voir moins | |
| Polydo GY-420 | Kukdo Chemical Co., Ltd. | Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing ...voir plus Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing materials. Foam density can be varied with formulation. voir moins | |
| Polydo GY-5000E | Kukdo Chemical Co., Ltd. | Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...voir plus Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-5100 | Kukdo Chemical Co., Ltd. | Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot...voir plus Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-6000E | Kukdo Chemical Co., Ltd. | Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...voir plus Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. voir moins | |
| Polydo GY-600E | Kukdo Chemical Co., Ltd. | Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most p...voir plus Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-700 | Kukdo Chemical Co., Ltd. | Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...voir plus Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo GY-750P | Kukdo Chemical Co., Ltd. | Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with ot...voir plus Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. voir moins | |
| Polydo PN-400 | Kukdo Chemical Co., Ltd. | Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...voir plus Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. voir moins | |
| Polydo PN-560 | Kukdo Chemical Co., Ltd. | Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...voir plus Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. voir moins | |
| Polydo SC-357 | Kukdo Chemical Co., Ltd. | Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...voir plus Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-381 | Kukdo Chemical Co., Ltd. | Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...voir plus Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-400 | Kukdo Chemical Co., Ltd. | Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the p...voir plus Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. voir moins | |
| Polydo SC-450 | Kukdo Chemical Co., Ltd. | Polydo SC-450 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the pre-polymer process. | |
| Polydo SC-4508 | Kukdo Chemical Co., Ltd. | Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or i...voir plus Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...voir plus Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo SC-490 | Kukdo Chemical Co., Ltd. | Polydo SC-490 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the prepolymer process. | |
| Polydo ST-480 | Kukdo Chemical Co., Ltd. | Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...voir plus Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation prepolymer process. voir moins | |
| Polydo ST-481 | Kukdo Chemical Co., Ltd. | Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...voir plus Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. voir moins | |
| Polydo TD-400 | Kukdo Chemical Co., Ltd. | Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...voir plus Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. voir moins | |
| Polydo TD-405 | Kukdo Chemical Co., Ltd. | Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...voir plus Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. voir moins | |
| Polydo TE-360 | Kukdo Chemical Co., Ltd. | Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration,...voir plus Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, transportation and construction applications. voir moins | |
| Prisorine 3501 | Cargill Industrial Specialties | Prisorine 3501 s a liquid, long-chain hydrocarbon with excellent color and thermo-oxidative stability for automotive and industrial coatings. | |
| PSI-021 | Gelest, Incorporated | Crosslinker for two-component condensation cure (silanol) RTV's. | |
| PSI-023 | Gelest, Incorporated | Base for zinc-rich paints. | |
| PSI-026 | Gelest, Incorporated | Highest silicon dioxide content precursor for sol-gel. | |
| PSIAL-007 | Gelest, Incorporated | Sol-gel intermediate for aluminum silicates. | |
| PSITI-019 | Gelest, Incorporated | Employed in formation of titania-silica aerogels. | |
| PTI-008 | Gelest, Incorporated | Polymeric metal alkoxide that contains roughly 5% free 2-ethyl-1,3-hexanediol. | |
| PTI-023 | Gelest, Incorporated | Polymeric metal alkoxide stabilized with roughly 5% ethylene glycol. | |
| Saret® SR515 | Sartomer Americas | Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber...voir plus Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber systems. Saret® SR500 offers good hardness and high modulus. It has a low mooney viscosity and a low compression set. Suggested applications of this product are for rubber and plastics, elastomers for rubber and plastics, and sealants. voir moins | |
| Saret® SR516 | Sartomer Americas | Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performa...voir plus Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. voir moins | |
| Saret® SR517 | Sartomer Americas | Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performanc...voir plus Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. voir moins | |
| Saret® SR517HP | Sartomer Americas | Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...voir plus Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR517HP is also available as a solid dispersion. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. voir moins | |
| Saret® SR519HP | Sartomer Americas | Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...voir plus Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR519HP is also available as a solid dispersion. Suggested applications include: elastomers, plastisols, rubber and plastics, building profile, injection molding and radiator hose rubbers and plastics, and sealants. voir moins | |
| Saret® SR522D | Sartomer Americas | Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D co...voir plus Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D contains a safe, non-nitroso scorch retarder and exhibits low color and low staining. Suggested applications for this product include belts, cables, and hoses; as well as, injection molding, radiator hose, rolls, and other rubber and plastics applications. voir moins | |
| SIB1610.0 | Gelest, Incorporated | Bis(n-methylbenzamido)ethoxymethyl-silane. | |
| SIB1817.0 | Gelest, Incorporated | Additive to formulations that enhances adhesion. | |
| SID2790.0 | Gelest, Incorporated | Adhesion promoter for silicone RTV's. | |
| SIE4899.0 | Gelest, Incorporated | Liquid crosslinker for silicone RTV's. | |
| SIM6519.0 | Gelest, Incorporated | Most common crosslinker for condensation cure silicone RTV's. | |
| SIM6519.2 | Gelest, Incorporated | Liquid crosslinker blend for silicone RTV's. | |
| SIM6555.0 | Gelest, Incorporated | Methyltriethyoxysilane. | |
| SIM6560.0 | Gelest, Incorporated | Methyltrimethoxysilane. | |
| SIM6590.0 | Gelest, Incorporated | Methyltris(methylethylketoximino)-silane that is a neutral crosslinker for condensation cure silicones. | |
| SIP6826.0 | Gelest, Incorporated | Crosslinker for medium refractive index vinyl addition silicone elastomers. | |
| SIT7110.0 | Gelest, Incorporated | Tetraethoxysilane. | |
| SIT7278.0 | Gelest, Incorporated | Tetrakis(dimethylsiloxy)silane. | |
| SIT7777.0 | Gelest, Incorporated | Tetra-n-propoxysilane. | |
| SIT8372.4 | Gelest, Incorporated | Trifluoropropyltris(dimethylsiloxy)-silane. | |
| SIT8710.0 | Gelest, Incorporated | Tris(cyclohexylamino)methylsilane. | |
| SR507A | Sartomer Americas | SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesive...voir plus SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesives, coatings, electronics, encapsulants, inks, polyurethane foams, and rubber & plastics. voir moins | |
| SR533 | Sartomer Americas | SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coat...voir plus SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coatings, TPE, inks, rubber and plastics, and wire and cable insulation. voir moins | |
| Synperonic T/701 | Croda Coatings & Polymers | Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or di...voir plus Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or dispersant. voir moins | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...voir plus Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. voir moins | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...voir plus Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. voir moins | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...voir plus Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. voir moins |
