| Acclaim® 8200 | Covestro | Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be use...voir plus Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be used in polyurethane and other applications, including cast elastomers, sealants, epoxy flexibilizers, defoamers, lubricants, crude oil de-emulsifiers, and plasticizers. As with any product, the use of Acclaim 8200 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| L-2881 | Chan Sieh Enterprises Co, Ltd. | L-2881 is an aliphatic polyether polyol with a solid content ratio of 35%. This product is clear and stable, and provides heat resistance and good adhesion. It can be used in adhesive applications. | |
| L-2891 | Chan Sieh Enterprises Co, Ltd. | L-2891 is an aliphatic polyether polyol with a solid content ratio of 35%. This product is tough and flexible with good adhesion. It can be used in adhesives and as a coating for leather. | |
| PEO-1 | Sumitomo Seika America, Inc. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-15 | Sumitomo Seika America, Inc. | PEO-15 is a nonionic water-soluble thermoplastic polymer. PEO-15 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-18 | Sumitomo Seika America, Inc. | PEO-18 is a nonionic water-soluble thermoplastic polymer. PEO-18 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika America, Inc. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-27 | Sumitomo Seika America, Inc. | PEO-27 is a nonionic water-soluble thermoplastic polymer. PEO-27 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-29 | Sumitomo Seika America, Inc. | PEO-29 is a nonionic water-soluble thermoplastic polymer. PEO-29 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika America, Inc. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika America, Inc. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika America, Inc. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PTG 2900SN | Univar Solutions | PTG 2900SN is a liquid to waxy, white solid diol that melts to a clear, colorless, viscous liquid, when reacted to isocyanates provides cold temperature flex and improved chemical and corrosion resistance. | Request Sample |
| SPECFLEX 334-028 | Univar Solutions | SPECFLEX 334-028 is a reactive styrene acrylonitrile (SAN) based copolymer polyether polyol with 22% solid content especially developed for the production of high resilience (HR) and combustion modified high resilience (CMHR) flexible slabstock foams. | Request Sample |
| SPECFLEX NC 630 | Univar Solutions | SPECFLEX NC 630 is a high functionality, EO capped, polyether product. Its high molecular weight, functionality and high primary hydroxyl content make it well suited for high resilience, flexible molded foams. | Request Sample |
| SPECFLEX NC 701 | Univar Solutions | SPECFLEX NC 701 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile. It is designed for use in the manufacture of high resiliency (HR) flexible molded foam, high comfort flexible foam and semi-flexible foam. It can also...voir plus SPECFLEX NC 701 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile. It is designed for use in the manufacture of high resiliency (HR) flexible molded foam, high comfort flexible foam and semi-flexible foam. It can also be used to produce high-loadbearing foams over a wide density range. voir moins | Request Sample |
| VORALUX HL 431 | Univar Solutions | VORALUX HL 431 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile and filtered to 100 microns. It is used in the manufacture of flexible slabstock polyurethane foams and is manufactured without BHT and processes well o...voir plus VORALUX HL 431 is a unique grafted polyether polyol containing copolymerized styrene and acrylonitrile and filtered to 100 microns. It is used in the manufacture of flexible slabstock polyurethane foams and is manufactured without BHT and processes well on most types of foam machinery. voir moins | Request Sample |
| VORANOL 2000LM | Univar Solutions | VORANOL 2000LM is a low-monol polyol that has a true diol functionality. Offers superior dynamic as well as mechanical properties to applications. VORANOL™ 2000LM is used in the manufacture of pre-polymers for adhesives and sealants. | Request Sample |
| VORANOL 220-028 | Univar Solutions | VORANOL 220-028 is a non-neutralized 4000 molecular weight polyether diol with a hydroxyl number of 28 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-056 | Univar Solutions | VORANOL 220-056 is a non-neutralized 2000 molecular weight polyether diol with a hydroxyl number of 56 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-056N | Univar Solutions | VORANOL 220-056N is a neutralized 2000 molecular weight polyether diol with a hydroxyl number of 56 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-110 | Univar Solutions | VORANOL 220-110 is a non-neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-110N | Univar Solutions | VORANOL 220-110N is a neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-260 | Univar Solutions | VORANOL 220-260 is a non-neutralized 425 molecular weight polyether diol with a hydroxyl number of 260 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-530 | Univar Solutions | VORANOL 220-530 is an amine initiated 212 molecular weight polyether diol with a hydroxyl number of 530, with compaitbility with polybutadiene-based polyols, used across a wide range of applications including electrical potting & encapsulation, adhesives,...voir plus VORANOL 220-530 is an amine initiated 212 molecular weight polyether diol with a hydroxyl number of 530, with compaitbility with polybutadiene-based polyols, used across a wide range of applications including electrical potting & encapsulation, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 222-028LM | Univar Solutions | VORANOL 222-028LM is a fast reactivity polyol with nearly true diol functionality and high primary hydroxyl content. Low-monol polyols are characterized by excellent consistency in reactivity due to precise control of functionality, OH content, water cont...voir plus VORANOL 222-028LM is a fast reactivity polyol with nearly true diol functionality and high primary hydroxyl content. Low-monol polyols are characterized by excellent consistency in reactivity due to precise control of functionality, OH content, water content, and basicity. voir moins | Request Sample |
| VORANOL 222-029 | Univar Solutions | VORANOL 222-029 is a fast reacting 4000 molecular weight polyether diol with high primay hydroxyl content with a OH number of 29 used across a wide range of applications including prepolymer manufacturing, adhesives, sealants, coatings, castings, foams an...voir plus VORANOL 222-029 is a fast reacting 4000 molecular weight polyether diol with high primay hydroxyl content with a OH number of 29 used across a wide range of applications including prepolymer manufacturing, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 222-056 | Univar Solutions | VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams a...voir plus VORANOL 222-056 is a fast reacting 2000 molecular weight high primary hydroxyl polyether diol with a hydroxyl number of 56 used across a wide range of applications including pre-polymer & PUD manufacturing, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 223-060LM | Univar Solutions | VORANOL 223-060LM is a polyether polyol that offers enhanced mechanical performance, abrasion and long-term durability compared to conventional propylene glycol (PPG) systems (PPG+). It enables optimized microphase separation from conventional urethane ha...voir plus VORANOL 223-060LM is a polyether polyol that offers enhanced mechanical performance, abrasion and long-term durability compared to conventional propylene glycol (PPG) systems (PPG+). It enables optimized microphase separation from conventional urethane hard segment chemistries to permit formulation of high-performance polyurethane systems. This innovative upgrade continues to offer the excellent processing performance of standard polyether materials. voir moins | Request Sample |
| VORANOL 230-056 | Univar Solutions | VORANOL 230-056 is a non-neutralized 3000 molecular weight polyether triol with a hydroxyl number of 56 used across a wide range of applications including storage stable prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-112 | Univar Solutions | VORANOL 230-112 is a non-neutralized 1500 molecular weight polyether triol with a hydroxyl number of 112 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-238 | Univar Solutions | VORANOL 230-238 is a non-neutralized 700 molecular weight polyether triol with a hydroxyl number of 238 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 230-660 | Univar Solutions | VORANOL 230-660 is a non-neutralized 600 molecular weight polyether triol with a hydroxyl number of 660 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 232-028 | Univar Solutions | VORANOL 232-028 is a fast reacting non-neutralized 5900 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 28 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...voir plus VORANOL 232-028 is a fast reacting non-neutralized 5900 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 28 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 232-034 | Univar Solutions | VORANOL 232-034 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 34 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...voir plus VORANOL 232-034 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 34 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 232-035 | Univar Solutions | VORANOL 232-035 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 35 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, ...voir plus VORANOL 232-035 is a fast reacting non-neutralized 4800 molecular weight polyether triol with a high primary hydroxyl content with an OH number of 35 used across a wide range of applications including prepolymers, adhesives, sealants, coatings, castings, foams and binders. voir moins | Request Sample |
| VORANOL 280 | Univar Solutions | VORANOL 280 is a sucrose/glycerine initiated polyol with low viscosity finding benefit in all-water-blown, pour-in-place applications. This polyol is typically blended with lower functionality polyols. Typical applications include insulated garage and ent...voir plus VORANOL 280 is a sucrose/glycerine initiated polyol with low viscosity finding benefit in all-water-blown, pour-in-place applications. This polyol is typically blended with lower functionality polyols. Typical applications include insulated garage and entry doors, portable coolers, flotation products, and roofing and sheathing laminated products. voir moins | Request Sample |
| VORANOL 360 | Univar Solutions | VORANOL 360 is a low viscosity sucrose/glycerine initiated polyether polyol with a OH number of 4.5 designed for the production of both high and low density rigid polyurethane foams. It can be used alone, or in combination with other polyols or fire retar...voir plus VORANOL 360 is a low viscosity sucrose/glycerine initiated polyether polyol with a OH number of 4.5 designed for the production of both high and low density rigid polyurethane foams. It can be used alone, or in combination with other polyols or fire retardant agents, to achieve desired properties. voir moins | Request Sample |
| VORANOL 370 | Univar Solutions | VORANOL 370 is a sucrose/glycerine initiated polyether polyol is a 7.0 functional, designed for the production of rigid polyurethane foam. It is suitable for production of both high and low density foams. It can be used alone, or in combination with other...voir plus VORANOL 370 is a sucrose/glycerine initiated polyether polyol is a 7.0 functional, designed for the production of rigid polyurethane foam. It is suitable for production of both high and low density foams. It can be used alone, or in combination with other polyols or fire retardant agents, to achieve various degrees of crosslinking. It is especially suitable for foam applications that require a high strength-to-density ratio. The high degree of crosslinking afforded by VORANOL 370 polyol provides excellent dimensional stability under both humid aging and dry heat aging conditions. . voir moins | Request Sample |
| VORANOL 4000LM | Univar Solutions | VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanica...voir plus VORANOL 4000LM is a homopolymer diol with an molecular weight of 4000 mainly used for the manufacture of prepolymers for coatings, adhesives and sealants. The product enables the creation of cast elastomers, adhesives and sealants with excellent mechanical properties. Due to its true functionality and low viscosity, it has the potential to reduce the use of more expensive polyols in the overall polyurethane formulation. voir moins | Request Sample |
| VORANOL 4053 | Univar Solutions | VORANOL 4053 is a high functionality EO rich polyether polyol finding benefit in high resiliency (HR), molded, semi-rigid and flexible foams. It also offers excellent cell opening when used in flexible foam formulations. It may be used at low levels (0.5 ...voir plus VORANOL 4053 is a high functionality EO rich polyether polyol finding benefit in high resiliency (HR), molded, semi-rigid and flexible foams. It also offers excellent cell opening when used in flexible foam formulations. It may be used at low levels (0.5 – 5.0 php) without significant loss of foam hardness. voir moins | Request Sample |
| VORANOL 4240 | Univar Solutions | VORANOL 4240 is a 4000 molecular weight diol based on propylene oxide with ethylene oxide capping. Its high molecular weight and enhanced reactivity make it well suited to use in the production of high performance polyurethane elastomers, prepolymers, coa...voir plus VORANOL 4240 is a 4000 molecular weight diol based on propylene oxide with ethylene oxide capping. Its high molecular weight and enhanced reactivity make it well suited to use in the production of high performance polyurethane elastomers, prepolymers, coatings and adhesives. voir moins | Request Sample |
| VORANOL 490 | Univar Solutions | VORANOL 490 is a sucrose/glycerine initiated 4.3 functional, polyether polyol designed for the production of low & high density rigid polyurethane foam. VORANOL 490 polyol can be used alone, or in combination with other polyols or fire retardant agents, t...voir plus VORANOL 490 is a sucrose/glycerine initiated 4.3 functional, polyether polyol designed for the production of low & high density rigid polyurethane foam. VORANOL 490 polyol can be used alone, or in combination with other polyols or fire retardant agents, to achieve various degrees of crosslinking. voir moins | Request Sample |
| VORANOL 800 | Univar Solutions | VORANOL 800 is an aliphatic-amine initiated polyol designed for blending with other polyols. It offers lower viscosity than VORANOL 770 polyol and exhibits excellent HCFC-134a compatibility. VORANOL 800 polyol provides autocatalytic activity, reducing cat...voir plus VORANOL 800 is an aliphatic-amine initiated polyol designed for blending with other polyols. It offers lower viscosity than VORANOL 770 polyol and exhibits excellent HCFC-134a compatibility. VORANOL 800 polyol provides autocatalytic activity, reducing catalyst requirements and improving flow, compressive strength, and Kfactor when blended with other rigid polyols. Typical applications include foam core laminate, pour-in-place insulation, spray insulation, packaging, polyol blends. voir moins | Request Sample |
| VORANOL 8000LM | Univar Solutions | VORANOL 8000LM is a homopolymer diol with a molecular weight of 8000 Da, and with a real functionality close to 2. It is used to make high performance PU adhesives, sealants, and elastomers. | Request Sample |
| VORANOL CP-6001 | Univar Solutions | VORANOL CP-6001 is a triol polyether polyol, capped, 6000 MW, specially developed for the production of flexible HR moulded polyurethane foam with TDI, TDI/ PMDI or MDI. It can be used in the production of semi-rigid integral skin foams as well as in the ...voir plus VORANOL CP-6001 is a triol polyether polyol, capped, 6000 MW, specially developed for the production of flexible HR moulded polyurethane foam with TDI, TDI/ PMDI or MDI. It can be used in the production of semi-rigid integral skin foams as well as in the production of cold cure moulded foams and high resilience moulded. voir moins | Request Sample |
