| Airase® 4500 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...voir plus Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). voir moins | |
| Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...voir plus Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. voir moins | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. voir moins | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. voir moins | |
| DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. voir moins | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...voir plus Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. voir moins | |
| Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...voir plus Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. voir moins | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...voir plus RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...voir plus RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. voir moins | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...voir plus RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...voir plus RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...voir plus RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...voir plus RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...voir plus RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...voir plus RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...voir plus Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...voir plus Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. voir moins | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...voir plus RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...voir plus RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...voir plus RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...voir plus RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...voir plus RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...voir plus RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...voir plus SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...voir plus SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
| SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
| SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
| SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
| SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
| SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
| SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
| SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
| SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
| SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | |
| SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide ...voir plus Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide variety of applications where foam prevention or foam elimination is nescessary without causing surface defects. voir moins | |
| Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...voir plus Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. voir moins | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...voir plus Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. voir moins | |
| SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
| SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
| SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A liquid, acetylenic-modified polysiloxane-based emulsion defoamer which provides excellent balance of initial knockdown and sustained defoaming with no detrimental effects. Designed for use in aqueous ink and coating systems. 46% active liquid. | |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based emulsion defoamer designed for use in aqueous ink systems. It is recommended for use in grinding and dispersion as well as letdown applications. 100% active liquid. | |
| SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast...voir plus This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast escape of air entrapped while incorporating water and during mixing. voir moins | |
| Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minim...voir plus Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Additional advantages of Surfynol® MD20 include, long-lasting defoamer efficacy, ease of incorporation and good compatibility without separation, synergestic with typical wetting agents, eliminates microfoam, wide compounding latitude, solvent-free and temperature and pH stable (pH 1-13). voir moins | |
| SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
| SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...voir plus ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. voir moins | |
| ZetaSperse® 179 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, c...voir plus ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Ideal applications include resinated dispersions, colorants and pigment dispersions, inks and graphic arts, architectural and industrial coatings, and industrial processes. voir moins |
