Airase® 4500 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...voir plus Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). voir moins | |
Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...voir plus Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. voir moins | |
Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | |
Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. voir moins | |
Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. voir moins | |
DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. voir moins | |
Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...voir plus Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. voir moins | |
Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...voir plus Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. voir moins | |
EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...voir plus Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. voir moins | |
Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...voir plus Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. voir moins | |
P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
Polymer ST 81 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...voir plus Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. voir moins | |
Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...voir plus Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. voir moins | |
Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...voir plus Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. voir moins | |
Sulfonex™ M-80 | Estron Chemical, Inc. | Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticize...voir plus Sulfonex™ M-80 is a tosylamide/formaldehyde resin used as a modifier in lacquers, inks and adhesives to promote gloss, adhesion and overall durability. Sulfonex™ M-80 has compatibility with most commercial polymeric binders, pigments, dyes and plasticizers. Solutions of Sulfonex™ M-80 have a low viscosity and offer the advantage of formulating high solids lacquers. Sulfonex™ M-80 improves the compatibility of resins with plasticizers and pigments which may otherwise remain incompatible. In adhesives formulations, Sulfonex™ M-80 helps in bonding many substrates such as cellophane and aluminum foils to themselves or to paper. voir moins | |
SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...voir plus SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...voir plus SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | |
Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | |
SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide ...voir plus Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide variety of applications where foam prevention or foam elimination is nescessary without causing surface defects. voir moins | |
Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...voir plus Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. voir moins | |
Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...voir plus Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. voir moins | |
SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A liquid, acetylenic-modified polysiloxane-based emulsion defoamer which provides excellent balance of initial knockdown and sustained defoaming with no detrimental effects. Designed for use in aqueous ink and coating systems. 46% active liquid. | |
SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based emulsion defoamer designed for use in aqueous ink systems. It is recommended for use in grinding and dispersion as well as letdown applications. 100% active liquid. | |
SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast...voir plus This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast escape of air entrapped while incorporating water and during mixing. voir moins | |
Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minim...voir plus Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Additional advantages of Surfynol® MD20 include, long-lasting defoamer efficacy, ease of incorporation and good compatibility without separation, synergestic with typical wetting agents, eliminates microfoam, wide compounding latitude, solvent-free and temperature and pH stable (pH 1-13). voir moins | |
SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...voir plus ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. voir moins | |
ZetaSperse® 179 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, c...voir plus ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Ideal applications include resinated dispersions, colorants and pigment dispersions, inks and graphic arts, architectural and industrial coatings, and industrial processes. voir moins |