| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...voir plus ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...voir plus ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...voir plus ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...voir plus ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. voir moins | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...voir plus ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...voir plus ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...voir plus ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...voir plus ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. voir moins | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...voir plus ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. voir moins | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...voir plus ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...voir plus ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...voir plus ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ MP 51P | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51P is a powder based organic defoamer made from a combination of mineral oils and silicates. This product is used in cement, starch, paint, adhesives, plasters, and powdered detergents. | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...voir plus ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...voir plus ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. voir moins | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...voir plus ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. voir moins | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...voir plus ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ VF 35N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, l...voir plus ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ VF 60 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster...voir plus ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...voir plus ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. voir moins | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...voir plus ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. voir moins | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...voir plus ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. voir moins | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...voir plus ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...voir plus ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins |
