| CS-200 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-200 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-200 has a specific gravity of 2.5, a bulk density of 63 lb/ft3, a hegman value of 2, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 78 to 83. voir moins | |
| CS-325 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-325 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-325 has a specific gravity of 2.5, a bulk density of 60 lb/ft3, a hegman value of 3, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 80 to 85. voir moins | |
| CS-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...voir plus CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-400 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-400 has a specific gravity of 2.5, a bulk density of 50 lb/ft3, a hegman value of 4 to 5, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 85 to 90. voir moins | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...voir plus LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...voir plus LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. voir moins | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...voir plus LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...voir plus Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. voir moins | |
| WhiteLite™ WL-32 | Glassfillers.com (A unit of Vitrominerals Inc.) | WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight th...voir plus WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-32 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-32 has a bulk density of 50 lb/ft3, oil absorption of 22, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 4, and a brightness of 90 to 91 photovolt Y value. voir moins | |
| WL-42 | Glassfillers.com (A unit of Vitrominerals Inc.) | WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight t...voir plus WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-42 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-42 has a bulk density of 40 lb/ft3, oil absorption of 25, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 2, and a brightness of 90 to 91 photovolt Y value. voir moins |
