| A-6 Polyamine | Epoxy Chemicals, Inc. | A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adh...voir plus A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adhesion properties. It finds application in construction adhesives, hardened concrete adhesives, injection resin, and ASTM 881 resin systems. voir moins | |
| APR Polyamine | Epoxy Chemicals, Inc. | APR Polyamine is a clear liquid that functions as a fast setting amine curing agent with very low viscosity. This product has high strength and can be used as an AEP replacement. It is often used as an accelerator for other curing agents and in adhesives. | |
| EFB Polyamine | Epoxy Chemicals, Inc. | EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds applic...voir plus EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds application in seamless epoxy flooring, coatings, and chemical resistant coatings. voir moins | |
| FB Polyamine | Epoxy Chemicals, Inc. | FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use...voir plus FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with bisphenol A epoxy resins, and acrylated/epoxy resins at room temperature. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-25 Polyamine | Epoxy Chemicals, Inc. | FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with...voir plus FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-30 Polyamine | Epoxy Chemicals, Inc. | FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and ...voir plus FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in chemical resistant coatings and seamless flooring. voir moins | |
| FB-31 Polyamine | Epoxy Chemicals, Inc. | FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use wi...voir plus FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-618 Polyamine | Epoxy Chemicals, Inc. | FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and...voir plus FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid epoxy resins. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. voir moins | |
| FS-10 Polyamine | Epoxy Chemicals, Inc. | FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative o...voir plus FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in epoxy construction adhesives and flooring applications such as construction adhesives, injection resins, seamless trowel flooring, and hardened concrete adhesives. voir moins | |
| FS-1608 Polyamine | Epoxy Chemicals, Inc. | FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactiv...voir plus FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. voir moins | |
| FS-289 Polyamine | Epoxy Chemicals, Inc. | FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used ...voir plus FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It is suitable for use in construction adhesives, injection resins, accelerated flooring systems, and hardened concrete adhesives. voir moins | |
| FS-290 Polyamine | Epoxy Chemicals, Inc. | FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener...voir plus FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It functions as a curing agent for liquid epoxy resins, and finds application in construction adhesives, solvent free high solids coatings, crack injection resins, accelerate flooring systems, and hardened concrete adhesives. voir moins | |
| FS-43 Polyamine | Epoxy Chemicals, Inc. | FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactiv...voir plus FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactive accelerator for polyamide, amidoamine, and cycloaliphatic amine curing agents. It is suitable for use in construction adhesives, injection resins, and hardened concrete adhesives. voir moins | |
| FS-56 Polyamine | Epoxy Chemicals, Inc. | FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or ...voir plus FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in construction adhesives, injection resins, seamless flooring, and hardened concrete adhesives. voir moins | |
| FS-943 Polyamine | Epoxy Chemicals, Inc. | FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive...voir plus FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. voir moins | |
| HCR 280 Polyamine | Epoxy Chemicals, Inc. | HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and ...voir plus HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and can find application in industrial flooring, high-solids coatings, chemical resistant linings and mortars, and secondary containment linings. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| UWL Polyamine | Epoxy Chemicals, Inc. | UWL Polyamine is an amine curing agent suited for use in underwater or damp applications. This product combines hydrophobic nature of the hardener with long working life. It can be used to improve damp adhesion for existing coating or flooring systems, it...voir plus UWL Polyamine is an amine curing agent suited for use in underwater or damp applications. This product combines hydrophobic nature of the hardener with long working life. It can be used to improve damp adhesion for existing coating or flooring systems, it can also find application in splash zone compounds, pile grout resins, underwater injection resins, underwater coatings, and grouts and mortars. voir moins |
