| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...voir plus Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. voir moins | |
| Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...voir plus Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...voir plus Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. voir moins | |
| Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...voir plus Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...voir plus Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DA-8506 | Dover Chemical Corporation | DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8506XS | Dover Chemical Corporation | DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when addi...voir plus DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8527 | Dover Chemical Corporation | DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...voir plus DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. voir moins | |
| Dovermulse H-0700 | Dover Chemical Corporation | Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700...voir plus Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...voir plus Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1010-P | Dover Chemical Corporation | Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primaril...voir plus Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1020-P | Dover Chemical Corporation | Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primaril...voir plus Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1035-N | Dover Chemical Corporation | Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primaril...voir plus Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovernox® 10 | Dover Chemical Corporation | Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well s...voir plus Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well suited for use as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC, and polyurethanes. voir moins | |
| Dovernox® 76 | Dover Chemical Corporation | Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabili...voir plus Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC and polyurethanes. voir moins | |
| Dovernox® D-311 | Dover Chemical Corporation | Dovernox® D-311 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation, to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-321 | Dover Chemical Corporation | Dovernox® D-321 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-911 | Dover Chemical Corporation | Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnam...voir plus Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnamate) methane. voir moins | |
| Dovernox® D-921 | Dover Chemical Corporation | Dovernox® D-921 is an antioxidant blend which has an advantage of low-dusting during handling and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Dovernox® 10. | |
| Dovernox® D-9411-T | Dover Chemical Corporation | Dovernox® D-9411T is a one to one blend of Doverphos® S-9228T and Doverphos® S-480. It is offered by Dover Chemical Corporation to be used in various polymer formulations as an excellent cost/performance processing stabilizer. | |
| Dovernox®D-721 | Dover Chemical Corporation | Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnama...voir plus Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. voir moins | |
| Doverphos® 10 HR (TPP) | Dover Chemical Corporation | Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC...voir plus Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC, and polycarbonates. voir moins | |
| Doverphos® 10 (TPP) | Dover Chemical Corporation | Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production...voir plus Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC and polycarbonates. voir moins | |
| Doverphos® 11 | Dover Chemical Corporation | Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of r...voir plus Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of rigid and plasticized PVC applications where high gloss is important. voir moins | |
| Doverphos® 12 | Dover Chemical Corporation | Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and p...voir plus Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and plasticized PVC applications where early color hold and brighter, more consistent color is important. voir moins | |
| Doverphos® 213 (DPP) | Dover Chemical Corporation | Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be e...voir plus Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be effective in improving the color of unsaturated polyesters and minimize plateout during processing. voir moins | |
| Doverphos® 253 | Dover Chemical Corporation | Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC...voir plus Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC applications. In addition Doverphos® 253 can be used in lube applications as an additive for metalworking fluids. voir moins | |
| Doverphos® 4 (TNPP) | Dover Chemical Corporation | Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is w...voir plus Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is well suited for use in the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR Plus (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverpho...voir plus Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverphos® 4-HR Plus (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives...voir plus Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 49 (TTDP) | Dover Chemical Corporation | Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatilit...voir plus Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatility when mixed with additional metal heat stabilizers for production of PVC products. voir moins | |
| Doverphos® 6 (TDP) | Dover Chemical Corporation | Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give b...voir plus Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors and improve early color and clarity in un-pigmented compounds. Doverphos® 6 (TDP) is well suited for use in the production of polyolefins, polyurethanes, coatings, ABS, lubricants, and polyethylene terephthalate. voir moins | |
| Doverphos® 613 | Dover Chemical Corporation | Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary ...voir plus Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary metal stabilizers and epoxy stabilizers that commonly used in these applications. Doverphos 613 is well suited for use in the production of isocyanates either MDI, TDI, aliphatic isocyanates, rigid PVC and rigid vinyl chloride copolymers. voir moins | |
| Doverphos® 7 (PDDP) | Dover Chemical Corporation | Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of poly...voir plus Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 8 (DPDP) | Dover Chemical Corporation | Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the p...voir plus Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 9 (DPIOP) | Dover Chemical Corporation | Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for mo...voir plus Doverphos® 9 (DPIOP) is a clear liquid made of diphenyl isooctyl phosphite, which has a low molecular weight, and high phosphorus content of alkyl-aryl phosphites. Primarily used as a heat stablizer, it can also be used as a brightness stabilizer for more consistent colors in PVC applications. Doverphos® 9 (DPIOP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® HiPure 4 (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverph...voir plus Doverphos® HiPure 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) that has less than 0.1% residual nonylphenol. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer, Doverphos® HiPure 4 (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® HiPure 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suit...voir plus Doverphos® HiPure 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with approximately 0.75% triisopropanolamine and less than 0.1% residual nonyl phenol. Primarily used as a heat stabilizer, Doverphos® HiPure 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® S-480 | Dover Chemical Corporation | Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S...voir plus Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S-480 can also be used to stabilize polyesters, polycarbonates, polyamides, polystyrenes and elastomers. voir moins | |
| Doverphos® S-680 | Dover Chemical Corporation | Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, AB...voir plus Doverphos® S-680 is a solid white flake of distearyl pentaerythritol diphosphite. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-680 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-682 | Dover Chemical Corporation | Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the prod...voir plus Doverphos® S-682 is a solid white flake of distearyl pentaerythritol diphosphite and contains less than 1% triisopropanolamine. Primarily used as an antioxidant and stabilizer for polymers and adhesives. Doverphos® S-682 is well suited for use in the production of polyolefins, polystyrene, rubber, ABS, PVC, polyester, and polycarbonates. voir moins | |
| Doverphos® S-9228 | Dover Chemical Corporation | Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or ...voir plus Doverphos® S-9228 is an off white, free flowing powder made of Bis (2,4-dicumylphenyl) pentaerythritol diphosphite. Primarily used as a solid phosphite antioxidant additive, it has excellent hydrolytic stability without the addition of inert products or triisopropanol amine. Doverphos® S-9228 exhibits similar color performance as demonstrated by distearyl pentaerythritol diphosphite. Doverphos® S-9228 can be used to improve the performance of polyolefin resins, engineering resins and powder coatings. voir moins | |
| Doverphos® S-9228PC | Dover Chemical Corporation | Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stabilit...voir plus Doverphos® S-9228PC is an off-white free flowing powder phosphite antioxidant. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos® S-9228PC can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doverphos® S-9228T | Dover Chemical Corporation | Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, th...voir plus Doverphos® S-9228T is an off-white free flowing powder phosphite antioxidant with 1% triisopropanol amine. Primarily used to improve the performance of polyolefin resins, engineering resins and powder coatings, it offers high activity with good color, thermal and hydrolitic stability. Because of its high melting point, Doverphos S-9228T can be utilized in applications that require processing at elevated temperatures. voir moins | |
| Doversperse 3-NR | Dover Chemical Corporation | Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber...voir plus Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber coatings, inks, carpet backings, paper and fabric coatings. Because of Doversperse 3-NR's non-ionic base, it can be used in both anionic and cationic emulsion systems. voir moins | |
| Doversperse A-1 | Dover Chemical Corporation | Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesi...voir plus Doversperse A-1 is and off-white to beige powder and is an aqueous dispersion of C18-28 chlorinated alkane resin. Primarily used as a flame retardant additive, it can also improve adhesion and impart water or chemical resistance to products such as adhesives, rubber coatings inks, carpet backings, paper and fabric coatings. Because of Doversperse A-1's non-ionic base, it is particularly useful in both anionic and cationic emulsion systems. voir moins | |
| Doversperse H-1015-P | Dover Chemical Corporation | Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily us...voir plus Doversperse H-1015-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1015-P is primarily used as a dispersant in various applications. voir moins | |
| Doversperse H-1035-P | Dover Chemical Corporation | Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily us...voir plus Doversperse H-1035-P is a dark brown or amber liquid made of a polyisobutylene succinimide prepared from 950 MW HR PIBSA and high molecular weight amines. It was prepared via the thermal route, so there is no chlorine. Doversperse H-1035-P is primarily used as a dispersant in various applications. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| Hordaresin CH151P | Dover Chemical Corporation | Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins...voir plus Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Hordaresin NP-70 | Dover Chemical Corporation | Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, tex...voir plus Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. It shows excellent synergies with antimony trioxides and improvements with ancillary in various grades of rubber. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins |
