| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...voir plus BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...voir plus BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...voir plus BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...voir plus BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| Mirel™ 8000 Latex | Metabolix | Mirel™ 8000 Latex is a 55% suspension of semicrystalline Mirel™ biodegradable resin with a a particle size is 1-3 um and typical viscosity from 300-500 centipoise. Mirel™ 8000 coated paper is repulpable, compostable, marine and fresh water degradable. Mir...voir plus Mirel™ 8000 Latex is a 55% suspension of semicrystalline Mirel™ biodegradable resin with a a particle size is 1-3 um and typical viscosity from 300-500 centipoise. Mirel™ 8000 coated paper is repulpable, compostable, marine and fresh water degradable. Mirel™ 8000 can be coated onto paper using rod, blade, gravure or flexographic coating equipment. Mirel™ latex can also be used to coat particles as well giving them a hydrophobic surface while being inherently biodegradable. Mirel™ 8000 can also be used as a binder or resin in ink systems or architectual coatings. voir moins | |
| Mirel™ M Grade Resins | Metabolix | Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powd...voir plus Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powder form for matting etc. In aqueous formulations, Mirel™ Virgin biobased PHA resins are biodegradable in soil and in marine and fresh water environments. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| NexSil™ 12 | Nyacol Nano Technology | NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder and more. voir moins | |
| NexSil™ 125-40 | Nyacol Nano Technology | NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an ant...voir plus NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an anti-slip coating. voir moins | |
| NexSil™ 125A | Nyacol Nano Technology | NexSil™ 125A is an acidic dispersion of 60 - 80 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications where large-particle size colloidal silica is required. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| NexSil™ 125NH4 | Nyacol Nano Technology | NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among ...voir plus NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among others. voir moins | |
| NexSil™ 12HS | Nyacol Nano Technology | NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binde...voir plus NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 20 | Nyacol Nano Technology | NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required. voir moins | |
| NexSil™ 20A | Nyacol Nano Technology | NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for us...voir plus NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for use with trivalent chromium conversion coatings, among other applications. voir moins | |
| NexSil™ 20K-30 | Nyacol Nano Technology | NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile...voir plus NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder, or other applications where a small particle-size colloidal silica is required. voir moins | |
| NexSil™ 20NH4 | Nyacol Nano Technology | NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, cat...voir plus NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications. voir moins | |
| NexSil™ 35A | Nyacol Nano Technology | NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates...voir plus NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates. voir moins | |
| NexSil™ 6 | Nyacol Nano Technology | NexSil™ 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. It can be used in paper, steel, and precision polishing applications as well. | |
| NexSil™ 8 | Nyacol Nano Technology | NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or...voir plus NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 85-40 | Nyacol Nano Technology | NexSil™ 85-40 is an alkaline dispersion of 40-60 nm colloidal silica at a 40% SiO2 concentration in water. The product is used in paper, steel and precision polishing applications as well as specialty wafer polishing applications. | |
| NexSil™ 85A | Nyacol Nano Technology | NexSil™ 85A is an acidic dispersion of 40 - 60 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications. | |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| NexSil™ 85NH4 | Nyacol Nano Technology | NexSil™ 85NH4 is an ammonia-stabilized alkaline dispersion of 85 nm colloidal silica at 40% SiO2 concentration in water with low alkali metal levels. It is used in a wide variety of applications such as paper, steel and precision polishing applications. | |
| Nyacol ® DP5540 | Nyacol Nano Technology | Nyacol DP5540, colloidal silica in ethylene glycol, is a dispersion of nano-sized silica particles with a particle size between 100 and 120 nm. It is used in abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol ® DP5480 | Nyacol Nano Technology | Nyacol DP5480, Colloidal Silica in Ethylene Glycol, are Silica particles with a particle size of 50nm colloidal silica at a 30% SiO2 concentration in water. The polymer-grade EG provides abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550pH7 | Nyacol Nano Technology | Nyacol® A1550pH7 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 7. It is used in the flame retardant treatments of DMAC solvent systems. | |
| Nyacol® AB40 | Nyacol Nano Technology | Nyacol® AB40 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.67. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® AL20 | Nyacol Nano Technology | Nyacol® AL20 Colloidal Alumina, a high temperature coating/binder, is a water-based dispersion of particle size 60-90nm at 20% Aluminum content. It is used within high-temperature binders for refractories and ceramics. | |
| Nyacol® AL20SD | Nyacol Nano Technology | Nyacol® AL20SD is an alumina powder with a particle size of 60-90nm, a high-temperature coating/binder, that is dispersible in either water or ethylene glycol. This product is used in coating/binder applications where a water-based system cannot be used. | |
| Nyacol® AL25 | Nyacol Nano Technology | Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...voir plus Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AL25-HP | Nyacol Nano Technology | Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...voir plus Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AP50 | Nyacol Nano Technology | Nyacol® AP50 is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a tertiary amine. The product is used in liquid flame-retarded epoxy systems, in aerospace structural prepregs, and in printed circuit boards. | |
| Nyacol® APE1540 | Nyacol Nano Technology | Nyacol® APE1540 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.70. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® APE3040 | Nyacol Nano Technology | Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromin...voir plus Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromine or chlorine and can be used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| NYACOL® DP6095 | Nyacol Nano Technology | NYACOL® DP6095 is a sub-micron calcium carbonate dispersion in ethylene glycol recommended for use as an additive in PET for film or fiber production. | |
| Nyacol® SN15 | Nyacol Nano Technology | Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15 is used in coatings and sealants. voir moins | |
| Nyacol® SN15CG | Nyacol Nano Technology | Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15ES is used in coatings and sealants. voir moins | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...voir plus Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. voir moins | |
| Nyasil™ 20 | Nyacol Nano Technology | Nyasil™ 20, a nano-structured amorphous silica powder, is an ethylene glycol silica additive with a mean particle diameter of 20μm. This product is used with polyester film and tape. | |
| Nyasil™ 5 | Nyacol Nano Technology | Nyasil™ 5 is an amorphous silica ethylene glycol silica additive with a particle size of 2.0µm. This product is used with polyester film and tape. | |
| Nyasil™ 6200 | Nyacol Nano Technology | Nyasil™ 6200, amorphous silica, ethylene glycol silica additive with a mean particle diameter of 1.5µm. This product is used with polyster film and tape. | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...voir plus SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. voir moins |
