| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...voir plus Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. voir moins | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...voir plus Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. voir moins | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...voir plus Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. voir moins | |
| Dovermulse H-0700 | Dover Chemical Corporation | Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700...voir plus Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...voir plus Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1010-P | Dover Chemical Corporation | Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primaril...voir plus Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1020-P | Dover Chemical Corporation | Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primaril...voir plus Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1035-N | Dover Chemical Corporation | Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primaril...voir plus Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins |
