| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...voir plus BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...voir plus Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. voir moins | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. voir moins | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...voir plus Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. voir moins | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...voir plus Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. voir moins | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...voir plus Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. voir moins | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...voir plus Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. voir moins | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...voir plus Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...voir plus Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...voir plus Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...voir plus Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| VPA 90 | AMRI Global | VPA 90 (vinylphosphonic acid) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as ...voir plus VPA 90 (vinylphosphonic acid) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as coatings, to inhibit corrosion, and as additives for dispersions. voir moins | |
| VPA-DME | AMRI Global | VPA-DME (vinylphosphonic acid dimethylester) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for su...voir plus VPA-DME (vinylphosphonic acid dimethylester) has outstanding properties in several application areas due to the presence of both lipophilic and hydrophilic functionalities in one molecule. It is particularly suitable to improve material properties, for surfaces such as coatings, to inhibit corrosion, and as additives for dispersions. voir moins |
