K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adh...voir plus
K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adhesives, and latex caulks. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
K-FLEX® 850P is a blend of dibenzoate plasticizers similar in composition to K-FLEX® 850S (DEGDB rich) that is designed for both vinyl and waterborne latex applications. Emerald Kalama Chemical was acquired by LANXESS in 2021.
K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable op...voir plus
K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable option for food packaging adhesives. In both VAE an PVAc emulsions, K-FLEX 850S provides excellent performance properties, such as wet tack, extended open times, chalk point/Tg suppression, reduced set times, and strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response...voir plus
K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). It also improves wet tack, suppresses Tg, extends open times, and reduces set times in adhesives. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...voir plus
K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. In adhesives applications, such as putty and water-based latex adhesives, K-FLEX DP is an effective, low-VOC choice. It also offers easier handling due to its extremely low freeze point. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...voir plus
K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. K-FLEX PG offers an excellent chemistry and regulatory profile and has no GHS label requirements in the U.S. and Europe. Like K-FLEX DP, K-FLEX PG has an extremely low freeze point, which results in easier handling. However, K-FLEX PG offers improved economy. It can be used at higher loading levels in waterborne adhesives without degrading performance. Ask LANXESS for more information about this product’s applicability to EU Ecolabel claims. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO...voir plus
Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO...voir plus
Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins
KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus
KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus
KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus
KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Désolé mais l'industrie que vous avez sélectionnée n'est pas disponible actuellement dans votre langue. Vous pouvez choisir une des langues ci-dessous pour sélectionner l'industrie ou sinon fermer cette fenêtre.
