| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...voir plus BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. voir moins | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...voir plus BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. voir moins | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...voir plus BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. voir moins | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...voir plus BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. voir moins | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...voir plus BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. voir moins | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...voir plus BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. voir moins | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...voir plus BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. voir moins | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...voir plus BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. voir moins | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...voir plus BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. voir moins | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...voir plus BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. voir moins | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...voir plus BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. voir moins | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...voir plus BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. voir moins | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...voir plus BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. voir moins | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...voir plus BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. voir moins | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...voir plus BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. voir moins | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...voir plus BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LithoFill 100 | LITHOS Industrial Minerals GmbH | LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...voir plus LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill BM | LITHOS Industrial Minerals GmbH | LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill MM | LITHOS Industrial Minerals GmbH | LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| PEL-CAT CA100 | Ele Corporation | PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons tha...voir plus PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors. voir moins | |
| PEL-EST CF190 | Ele Corporation | PEL-EST CF190 is propoxylated castor oil based non-silicone defoamer. It retains the fluidity of the original oil and is useful in the formation of organic defoamers. PEL-EST CF190 is water-dispersable. It is an excellent choice as a natural and renewab...voir plus PEL-EST CF190 is propoxylated castor oil based non-silicone defoamer. It retains the fluidity of the original oil and is useful in the formation of organic defoamers. PEL-EST CF190 is water-dispersable. It is an excellent choice as a natural and renewable organic defoamer. voir moins | |
| PEL-HIB CC220 | Ele Corporation | PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust i...voir plus PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication. PEL-HIB CC220 is very water soluble. In addition to its applications in metalworking fluids and coolants, cooling water and boiler operations, oil well and refinery operations, fuels, lubricants and greases, PEL-HIB CC220 also finds its uses in inorganic coatings, organic coatings, and printing inks. voir moins | |
| PEL-PAG CF240 | Ele Corporation | PEL-PAG CF240 is a water-soluble, non-silicone defoamer. It is butanol alkoxylated. PEL-PAG CF240 is used as a defoamer in waterborne paint and coatings. It can also be used as freeze-thaw stabilizer for latexes emulsions. | |
| PEL-PHOS CD260 | Ele Corporation | PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerizat...voir plus PEL-PHOS CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, and detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS CD260 can also be used as co-emulsifier for emulsion polymerization. voir moins | |
| PEL-PHOS CD270 | Ele Corporation | PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, co...voir plus PEL-PHOS CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, corrosion inhibitor, emulsifier for detergent concentrates & metalworking fluids, FDA, EPA compliance. voir moins | |
| PEL-PHOS CE250 | Ele Corporation | PEL-PHOS CE250 is a phosphate ester of alkoxylated isotridecyl alcohol. It is useful as an emulsifier for emulsion polymerization. It can also be used as co-dispersant and stabilizer for water-based coatings and paints. | |
| PEL-QUAT CS280 | Ele Corporation | PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a mu...voir plus PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a multi-functional additive. It can be used as an effective anti-static agent, wetting agent for coatings and adhesives, and as a quat emulsifier for drilling fluid. voir moins | |
| PEL-SIL CD710 | Ele Corporation | PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterbo...voir plus PEL-SIL CD710 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and ethylene oxide (EO) and propylene oxide (PO)polyether side chains. PEL-SIL CD710 minimizes foam stability and is an excellent defoamer for waterborne and solvent-based coatings and inks, and textile fibre processing applications. PEL-SIL CD710 is also recommended for use as a wetting agent, dispersant, and secondary emulsifier. voir moins | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with ma...voir plus PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. voir moins | |
| PEL-SIL CL310 | Ele Corporation | PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...voir plus PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. voir moins | |
| PEL-SIL CL320 | Ele Corporation | PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl funct...voir plus PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations. voir moins | |
| PEL-SIL CL330 | Ele Corporation | PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-...voir plus PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes. voir moins | |
| PEL-SIL CL340 | Ele Corporation | PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it prov...voir plus PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. voir moins | |
| PEL-SIL CL350 | Ele Corporation | PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a r...voir plus PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brownstock washing. voir moins | |
| PEL-SIL CL360 | Ele Corporation | PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent f...voir plus PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as a defoamer or anti-foaming agent for waterborne coatings systems. In polyurethane foam coatings, PEL-SIL CL360 acts as a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. voir moins | |
| PEL-SIL CL370 | Ele Corporation | PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane addi...voir plus PEL-SIL CL370 is an amino-functional siloxane with pedant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength. voir moins | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...voir plus PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. voir moins | |
| PEL-SIL CL390 | Ele Corporation | PEL-SIL CL390 is a specialty quaternary organosilicone. The dialkyl quats polysiloxane is substantive to fibers. It provides anti-stat, lubricity and softness in textile coating applications. It is non-yellowing and water repellent. PEL-SIL can be used ...voir plus PEL-SIL CL390 is a specialty quaternary organosilicone. The dialkyl quats polysiloxane is substantive to fibers. It provides anti-stat, lubricity and softness in textile coating applications. It is non-yellowing and water repellent. PEL-SIL can be used as additive to impart antimicrobial activity for polysiloxane coatings in medical device and marine coatings. voir moins | |
| PEL-SIL CL400 | Ele Corporation | PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems throug...voir plus PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems. voir moins | |
| PEL-SIL CW300 | Ele Corporation | PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other...voir plus PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic sirfactants and nonionic surfactants. voir moins | |
| PEL-SIL™ CX740 | Ele Corporation | PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surf...voir plus PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, and mechanical. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow for compounds and composites. voir moins | |
| PEL-STAT CS410 | Ele Corporation | PEL-STAT CS410 is a very effective internal antistatic agent. It is ideal for use in anti-static coatings for floors, walls, and anywhere anti-static properties are required. | |
| SILCOLAPSE 610 | Elkem Silicones | SILCOLAPSE 610 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and nonaqueous industrial applications. The product effectively controls foam at concentrations as low a...voir plus SILCOLAPSE 610 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and nonaqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem. voir moins | |
| SILCOLAPSE 621 | Elkem Silicones | SILCOLAPSE 621 is an antifoam designed for use in a wide range of aqueous industrial applications. It is a 10% emulsions. This product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. | |
| SILCOLAPSE 623 | Elkem Silicones | SILCOLAPSE 623 is a 30% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILC...voir plus SILCOLAPSE 623 is a 30% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 623 gives good results at wide-ranging pH and is particularly effective under alkaline conditions. voir moins |
