| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| AQUA CALK TWB | Sumitomo Seika America, Inc. | AQUA CALK TWB is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB is nonionic, its water absorption capacity does n...voir plus AQUA CALK TWB is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB is nonionic, its water absorption capacity does not change whether it is pure water or an electrolyte aqueous solution, and it can absorb acid and alkaline aqueous solutions. In addition, this product can be processed with heat and can be easily blended with resins and rubbers. voir moins | |
| AQUA CALK TWB-P | Sumitomo Seika America, Inc. | AQUA CALK TWB-P is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB-P is nonionic, its water absorption capacity do...voir plus AQUA CALK TWB-P is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB-P is nonionic, its water absorption capacity does not change whether it is pure water or an electrolyte aqueous solution, and it can absorb acid and alkaline aqueous solutions. In addition, this product can be processed with heat and can be easily blended with resins and rubbers. voir moins | |
| AQUPAANA AP-40F | Sumitomo Seika America, Inc. | AQUPAANA AP-40F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-40F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50 | Sumitomo Seika America, Inc. | AQUPAANA AP-50 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50F | Sumitomo Seika America, Inc. | AQUPAANA AP-50F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50M | Sumitomo Seika America, Inc. | AQUPAANA AP-50M is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50M has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-70 | Sumitomo Seika America, Inc. | AQUPAANA AP-70 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-70 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| FLO-THENE UF1.5N | Sumitomo Seika America, Inc. | FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no add...voir plus FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF20S | Sumitomo Seika America, Inc. | FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no addit...voir plus FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF4 | Sumitomo Seika America, Inc. | FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives...voir plus FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF80 | Sumitomo Seika America, Inc. | FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additiv...voir plus FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| HEC AG-15F | Sumitomo Seika America, Inc. | HEC AG-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AG-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AG-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AG-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AH-15 | Sumitomo Seika America, Inc. | HEC AH-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AH-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AH-15F | Sumitomo Seika America, Inc. | HEC AH-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AH-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AL-15 | Sumitomo Seika America, Inc. | HEC AL-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AL-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AL-15F | Sumitomo Seika America, Inc. | HEC AL-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AL-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AV-15F | Sumitomo Seika America, Inc. | HEC AV-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AV-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AV-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AV-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AW-15F | Sumitomo Seika America, Inc. | HEC AW-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AW-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AW-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AW-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AX-15 | Sumitomo Seika America, Inc. | HEC AX-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AX-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AX-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AX-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC SW-25F | Sumitomo Seika America, Inc. | HEC SW-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SW-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC SW-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SW-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC SZ-25F | Sumitomo Seika America, Inc. | HEC SZ-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SZ-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC SZ-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SZ-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| PEAM-1044 | Designer Molecules | PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application. | |
| PEAM-1769 | Designer Molecules | PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application. | |
| PEAM-645 | Designer Molecules | PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications. | |
| PEM-1066 | Designer Molecules | PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins | |
| PEO-1 | Sumitomo Seika America, Inc. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-15 | Sumitomo Seika America, Inc. | PEO-15 is a nonionic water-soluble thermoplastic polymer. PEO-15 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-18 | Sumitomo Seika America, Inc. | PEO-18 is a nonionic water-soluble thermoplastic polymer. PEO-18 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika America, Inc. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-27 | Sumitomo Seika America, Inc. | PEO-27 is a nonionic water-soluble thermoplastic polymer. PEO-27 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-29 | Sumitomo Seika America, Inc. | PEO-29 is a nonionic water-soluble thermoplastic polymer. PEO-29 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika America, Inc. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika America, Inc. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika America, Inc. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| SEPOLEX CSM-N | Sumitomo Seika America, Inc. | SEPOLEX CSM-N is a latex of CSM rubber (CHLOROSULFONATED POLYETHYLENE LATEX) with excellent heat resistance, durability, and chemical resistance. SEPOLEX CSM-N has excellent adhesion to rubber and textiles and is used in a wide range of applications. | |
| SEPOLSION G515 | Sumitomo Seika America, Inc. | SEPOLSION G515 is a water-based emulsion of olefin polymer copolymerized with ethylene and glycidyl methacrylate. SEPOLSION G515 shows excellent adhesion to various substrates (glass, paper, plastic, metal, etc.) due to its highly reactive epoxy group. | |
| SEPOLSION PA150 | Sumitomo Seika America, Inc. | SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating ...voir plus SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating agents, and improvement additives. voir moins | |
| SEPOLSION PA200 | Sumitomo Seika America, Inc. | SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agen...voir plus SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agents, and improvement additives. voir moins | |
| SPHERICAL POWDER CL-2080 | Sumitomo Seika America, Inc. | SPHERICAL POWDER CL-2080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of ...voir plus SPHERICAL POWDER CL-2080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER EA-209 | Sumitomo Seika America, Inc. | SPHERICAL POWDER EA-209 is spherical polyethylene powder (Ethylene acrylic acid copolymer). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide ran...voir plus SPHERICAL POWDER EA-209 is spherical polyethylene powder (Ethylene acrylic acid copolymer). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER HE-3040 | Sumitomo Seika America, Inc. | SPHERICAL POWDER HE-3040 is spherical polyethylene powder (High-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of...voir plus SPHERICAL POWDER HE-3040 is spherical polyethylene powder (High-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER LE-1080 | Sumitomo Seika America, Inc. | SPHERICAL POWDER LE-1080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of...voir plus SPHERICAL POWDER LE-1080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SULFOLANE Anhydrous Grade | Sumitomo Seika America, Inc. | SULFOLANE Anhydrous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Anhydrous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic sol...voir plus SULFOLANE Anhydrous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Anhydrous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| SULFOLANE Aqueous Grade | Sumitomo Seika America, Inc. | SULFOLANE Aqueous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Aqueous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solutio...voir plus SULFOLANE Aqueous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Aqueous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| SULFOLANE Super Grade | Sumitomo Seika America, Inc. | SULFOLANE Super Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Super Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution fo...voir plus SULFOLANE Super Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Super Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| U-793 | Designer Molecules | U-793 is a brown viscous liquid form, urethane resin. This product yields a tough hydrophobic polymer when cured. U-793 is most commonly used as an adhesion promoter to various substrates. | |
| U-835 | Designer Molecules | U-835 is a yellow liquid form urethane resin. This products low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. U-835 is most commonly used as an adhesive on a variety of substrates including metal, polyimide, s...voir plus U-835 is a yellow liquid form urethane resin. This products low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. U-835 is most commonly used as an adhesive on a variety of substrates including metal, polyimide, silicon, and ceramic applications. voir moins | |
| ZAIKTHENE A | Sumitomo Seika America, Inc. | ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE AC | Sumitomo Seika America, Inc. | ZAIKTHENE AC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has ex...voir plus ZAIKTHENE AC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE AC-HW-10 | Sumitomo Seika America, Inc. | ZAIKTHENE AC-HW-10 is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC-HW-10 shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass...voir plus ZAIKTHENE AC-HW-10 is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC-HW-10 shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE L | Sumitomo Seika America, Inc. | ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE N | Sumitomo Seika America, Inc. | ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE NC | Sumitomo Seika America, Inc. | ZAIKTHENE NC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE NC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has ex...voir plus ZAIKTHENE NC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE NC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins |
